User's Manual

ManualsBrandsPlanex Communications ManualsElectronicsAUDIO STEREO RECEIVER

Audio Stereo Receiver

1/4

Product Description:

This Bluetooth Stereo Audio Adapter wirelessly connect to your Bluetooth

enabled music players (such as: PCs, laptops, mobile phone, MP3 player and i-

Pod …which supported Bluetooth A2DP profile) for all your multimedia

applications. Listen to music from your music player in full-range quality stereo

sound.

Now, you can use Bluetooth to enable your speaker system by plug in your

“BT-WRV01” into 3.5mm audio connector. No special software is required for

installation. This Bluetooth stereo audio adapter provides friendly user’s interface

and LED indication , all operations can be done in one buttons. This adapter is

Bluetooth Standard 3.0 compliant ,it supports Bluetooth A2DP-source profiles .

Summary of content (4 pages)

PAGE 1
Audio Stereo Receiver PCi BT-WRV01 Product Description: This Bluetooth Stereo Audio Adapter wirelessly connect to your Bluetooth enabled music players (such as: PCs, laptops, mobile phone, MP3 player and iPod …which supported Bluetooth A2DP profile) for all your multimedia applications. Listen to music from your music player in full-range quality stereo sound. Now, you can use Bluetooth to enable your speaker system by plug in your “BT-WRV01” into 3.5mm audio connector.
PAGE 2
Audio Stereo Receiver PCi BT-WRV01 Button Function : Quick Start : 1. Power On dongle To press button for 2 seconds, the BT‐WRV01 will power on and blue LED will flash 3 times in two seconds. 2. Power Off dongle To press button for 2 seconds, the BT‐WRV01 will power off and red LED will flash 3 times in two seconds. 3. Pairing You are required to pair the BT‐WRV01 with your Bluetooth enabled audio device like mobile phone/PC/PDA before using it.
PAGE 3
Audio Stereo Receiver PCi BT-WRV01 Step 1 : Turn OFF the BT‐WRV01. Hold and keep pressing the button for 6 seconds until the red/blue LED indicators always light alternative. BT‐WRV01 is now ready for pairing. Step 2 : Initiate pairing process on your Bluetooth enabled audio device to pair . After search, you can find the device name “BT‐WRV01” Step 3 : When asked the Passkey by the mobile phone, enter “1234” and confirm it. When pairing is successful, the LED indicator will change to be blue and flash. 4.
PAGE 4
Audio Stereo Receiver PCi BT-WRV01 FCC Warning This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation. , May cause harmful interference to radio communication.