User's Manual

ManualsBrandsPlanex Communications ManualsComputers & AccessoriesGigabit wireless LAN router

Table Of Contents

MZK-WG300FF14

http://www.planex.net

Quick Installation Guide

Gigabit wireless LAN router

MZK-WG300FF14

Thank you for purchasing MZK-WG300FF14. Before using, please check if all accessories are in the

package. If not, please contact your dealer directly.

Package Contents:

1. MZK-WG300FF14 Router x1

2. Quick Installation Guide x1

3. Safety and Warranty Sheet x1

4. AC Power Adapter x1

5. LAN Cable x1

6. USB Cable x1

1 Parts

1.1 Front Panel LEDs

LEDs Status Meaning

Solid Green

When MZK-WG300FF14 is powered on, the Power LED will be solid

green.

Power

Off

The Power LED is off when AC power adapter is not connected.

Status

Amber

When MZK-WG300FF14 is powered on, a self-test will be started and

the Status LED will be amber for a few minutes, and then will turn

off. If there is any error on the router, it will stay amber.

Quick Installation Guide

Summary of content (8 pages)

PAGE 1
MZK-WG300FF14 http://www.planex.net Quick Installation Guide Gigabit wireless LAN router MZK-WG300FF14 Thank you for purchasing MZK-WG300FF14. Before using, please check if all accessories are in the package. If not, please contact your dealer directly. Package Contents: 1. MZK-WG300FF14 Router x1 2. Quick Installation Guide x1 3. Safety and Warranty Sheet x1 4. AC Power Adapter x1 5. LAN Cable x1 6. USB Cable x1 1 Parts 1.
PAGE 2
MZK-WG300FF14 Green On/Blinking Internet Off On WPS Off Wireless Blinking LED is off when there is no wireless connection to MZK-WG300FF14. The LED will be blinking when wireless reception works fine. On When network connection between MZK-WG300FF14 and a host is established, the LED will be on. Blinking The LED will be blinking when data is being transmitted or received between MZK-WG300FF14 and a host via the LAN Port.
PAGE 3
MZK-WG300FF14 1.3 Bottom Button Button WPS Function Press this button to establish a wireless connection between MZK-WG300FF14 and a station (remote device/host). *Operation temperature is 0～40℃. 2 Installation and Setup 2.1 Installing the Device Steps: 1. Open the MZK-WG300FF14 package. Check if all items are complete. 2. Choose a preferred installation site, where this router will be installed. 3. To connect PCs using wired connection, connect the LAN cables from PCs to the LAN ports. 4.
PAGE 4
MZK-WG300FF14 e. The “Local Area Connection Properties” window will appear. Select “Internet Protocol (TCP/IP), and then click “Properties” button. 2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK”. Close the “Local Area Connection Properties” window, and then close the “Network Connections” screen. 3. After the IP address setup is complete, open command prompt (i.e., click “Start” -> “Run…”), and then type ‘cmd’ and click “OK”. 4.
PAGE 5
MZK-WG300FF14 1. 2. 3. 4. To login to the web management interface, open a web browser. Enter “mf.setup” in the address bar. A login window will appear. Enter the user name (default is admin) and password (default is password). The homepage will be displayed. NOTE: The password can be changed in Administration -> Password. 2.4 Configuration Using Setup Wizard The Setup Wizard will guide you to configure the router for the first time. 1. Click “Setup Wizard” on the left pane.
PAGE 6
MZK-WG300FF14 PPPoE Select the PPPoE Type and change the Multi-PPPoE Provider, if necessary. Type the User Name (Login Name or Login Account), Password, and Service Name (optional) provided by your ISP. Click “Connect” to enable connection. 4. The LAN Interface Setup page will be displayed. If needed, setup the LAN port IP Address and Subnet Mask of the router. Click “Next>>” when done. NOTE: The LAN Interface Setup can also be configured with customized settings in Network -> LAN Interface Setup. 5.
PAGE 7
MZK-WG300FF14 Band – allows you to select the 802.11 standards that will be allowed to connect to the wireless router SSID – (service set identifier) allows you to enter a unique name for the wireless LAN. It is recommended to change the default SSID for better security. 6. The Wireless Security Setup page will be displayed. Select the encryption type to prevent any unauthorized access to your wireless network. Click “Finish”.
PAGE 8
MZK-WG300FF14 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.