IEEE 802.
Trademarks Copyright © PLANET Technology Corp. 2010. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications.
WEEE Warning To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET IEEE 802.3at Gigabit High Power over Ethernet Adapter User’s Manual For Models: IEEE 802.
Table Of Contents 1. Package Content................................................................ 6 2. Product Features............................................................... 7 3. Product Specification........................................................ 10 4. Product Outlook............................................................... 14 5. Hardware Installation....................................................... 16 5-1 POE-161.............................................................
1. Package Content Thank you for purchasing PLANET IEEE 802.3at High Power over Ethernet Adapter, POE-161 and POE-161S. Terms of “802.3at PoE Injector” in following section of this User’s Manual means the POE-161, Terms of “802.3at PoE Splitter” in following section of this User’s Manual means the POE-161S. Upon open the box of the IEEE 802.3at High Power over Ethernet Adapter and carefully unpack it. The box should contain the following items: POE-161: t The IEEE 802.
2. Product Features POE-161: l Interface t 2-Port RJ-45 interfaces ≤ 1-Port Data + Power output ≤ 1-Port Data input t 1 DC 56V input power socket l PoE t Gigabit High Power over Ethernet Mid-Span PSE t Pre-IEEE 802.3at compliant t IEEE 802.3af splitter devices compatible t Support PoE Power up to 30 Watts for PoE port t Up to 1 IEEE 802.3at devices powered t Provides DC 56V power over RJ-45 Ethernet cable to device with Ethernet port t Auto-detect of POE IEEE 802.
POE-161S: l Interface t 2-Port RJ-45 interfaces ≤ 1-Port PoE Power+ Data input ≤ 1-Port Data output t 1 DC out plug connector l PoE t Complies with IEEE 802.3at Power over Ethernet pre-standard, PD t Splits the 56V DC power over RJ-45 Ethernet cable into DC 5V/12V output t Up to 1 non-IEEE 802.3at devices powered t Auto-detect of PoE IEEE 802.3at equipment, protect devices from being damaged by incorrect installation t Adjustable two different output voltage options (5V/4.
PSE (Power Sourcing Equipment) is a device (switch, or hub for instance) that will provide power in a PoE setup. Maximum allowed continuous output power per such device in IEEE 802.3af is 15.4W, 30W in IEEE 802.3at pre-standard.
3. Product Specification POE-161: Product POE-161 Hardware Specification “Data” Input Port 1 x RJ-45 STP “PoE (Data+Power)” 1 x RJ-45 STP Interface Output Port DC 56V Input power 1 socket LED Indicator System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 1000Base-T: 2-Pair UTP Cat.
Power over Ethernet PoE Standard IEEE 802.3at High Power over Ethernet pre-standard / Mid-Span PSE PoE Power Output DC 56V / 30 Watts PoE Power supply Type Mid-Span Power Pin Assignment 4/5(+), 7/8(-) Standards Conformance Standards Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.
POE-161S: Product POE-161S Hardware Specification “Data” Out Port 1 x RJ-45 STP “PoE (Power+Data)” 1 x RJ-45 STP Interface Input Port DC Out Plug Connector 1 LED Indicator System: PoE In x 1 (Green) Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 1000Base-T: 2-Pair UTP Cat.
Standards Conformance Standards Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.
4. Product Outlook Figure 1 shows a front panel of 802.3at PoE Injector. Figure 1: POE-161 Outlook LED Indicators LED Color Function PWR Green Lights to indicate that the POE-161 has power. PoE In-use Green Lights to indicate the port is providing 56V DC in-line power.
Figure 2 shows a front panel of 802.3at PoE Splitter. Figure 2: POE-161S Outlook LED Indicators LED PoE In Color Green Function Lights to indicate the port is providing 56V DC in-line power.
5. Hardware Installation This IEEE 802.3at Gigabit High Power over Ethernet Adapter provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same device and automatically distinguishes the speed of incoming connection. Please refer to following sections for detail information about IEEE 802.3at Gigabit High Power over Ethernet Adapter. 5-1 POE-161 The following section describes the hardware features of POE161.
POE-161, the Injector Installation 1. Connect the AC adapter to “DC 56V” of POE-161. The power LED will be steady on. 2. Connect a standard network cable from Switch/workstation to “Ethernet” port of POE-161. 3. Connect the long cable that will be used to connect to the remote device to the port “Ethernet + DC”. 4. Connect with IEEE 802.3at devices, due to the capability of IEEE 802.3at Power over Ethernet pre-standard, the POE161 can directly connect with any IEEE 802.
Once POE-161 detects the existence of an IEEE 802.3at device, the POE In-use LED indicator will be steady on to shows it is providing power. Note If the connected device is not fully complying with IEEE 802.3at Power over Ethernet pre-standard or in-line power device, the LED indicator of POE-161 will not be steady on. POE-161 and POE-161S, the IEEE 802.3at Injector Splitter Installation 1. Connect the AC adapter to “DC 56V” of POE-161. The power LED will be steady on. 2.
100 meters Switch Data Power Data Data PoE AC DC Power Power POE-161 POE-161S PTZ Camera 1000Base-T UTP PoE 1000Base-T UTP with PoE AC Power Line (AC) DC Power Line (DC) Figure 4: Connection architecture over POE-161/POE-161S Note 1. According to IEEE 802.3at Power over Ethernet pre-standard, the POE-161 will not inject power to the cable if not connecting to IEEE 802.3at devices. 2. Please ensure the output voltage is correct before applying power to remote device.
The POE-161S separates the power out and provide two kind of DC power output through its DIP switch and its voltage and current shown as below: - 5V DC / 4.5A - 12V DC / 2A The default value will be set on 5V. Hint Please check the power requirement of the device that is going to get the power from POE-161S. If the power requirement is higher than POE-161S can supply, current overload will shutdown the POE-161S itself. Thus, it will shutdown your device as well.
POE-161S, the Splitter Installation 1. Connect a standard network cable from “Ethernet+DC” port of POE-161 to “PoE In” port of POE-161S. The POE LED of POE-161S / POE-161 will light on continuance. 100 meters Switch Data Power Data Data PoE AC DC Power Power POE-161 POE-161S PTZ Camera 1000Base-T UTP Warning PoE 1000Base-T UTP with PoE AC Power Line (AC) DC Power Line (DC) The POE-161S only accept IEEE 802.3at or IEEE 802.
Connect with 802.3at devices The POE-161S also provide the alternative to make the non IEEE 802.3at devices the possibility to connect with an IEEE 802.3at in-line power device like Power over Ethernet Injector or Power over Ethernet Switch, the figure is as below. 100 meters 802.3at in-line power Switch Power Data Data PoE DC POE-161S Power PTZ Speed Dome 1000Base-T UTP Hint 22 PoE 1000Base-T UTP with PoE DC Power Line (DC) With IEEE 802.
Customer Support Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=2 Switch support team mail address : support_switch@planet.com.tw Copyright © PLANET Technology Corp. 2010. Contents subject to revision without prior notice.
This page is intentionally left blank
