USER MANUAL QUICK INSTALLATION GUIDE Flat Subwoofer PATV65 BLUETOOTH® ENABLED ALL-TERRAIN SOUND SYSTEM
USER MANUAL QUICK INSTALLATION GUIDE PATV65 BLUETOOTH® ENABLED ALL-TERRAIN SOUND SYSTEM www.planetaudiousa.com/technical-support PX12 2012 iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. PLANET AUDIO is not affiliated with Apple Inc. Specifications subject to change without prior notice. 815 VER:1.
TABLE OF CONTENTS BEFORE YOU START------------------------------------------------------------------ 2 IMPORTANT SAFETY PRECAUTIONS INSTALLATION PRECAUTIONS WIRE DIAGRAM------------------------------------------------------------------------- 3 SPEAKER MOUNTING SUGGESTIONS---------------------------------------- 3 BEFORE INSTALLING THIS PRODUCT---------------------------------------- 4 TECHNICAL SUPPORT SUGGESTED MOUNTING METHODS------------------------------------------- 5 SURFACE MOUNT HANDLEBAR MOUN
Thank you for purchasing this PATV65 Bluetooth All-Terrain Sound System Please read through these instructions carefully so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
BEFORE YOU START ENGLISH IMPORTANT SAFETY PRECAUTIONS ■ BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: - Do not turn up the volume so high that you can’t hear what’s around you. - Use caution or temporarily discontinue use in potentially hazardous situations. ■ Do not operate mobile video equipment while driving a motorized vehicle – safe driving and safety consideration of others should always be your highest priority.
WIRE DIAGRAM ENGLISH MFC Fuse is located inside the power adaptor Turn counter clockwise to open INSERT INSERT Mini-DIN Connector QUICK RELEASE POWER ADAPTOR (INCLUDED) 15A Replace with 15A AGC Fuse type only POWER ADAPTOR INSERT Your cable 3.5mm to 3.
BEFORE INSTALLING THIS PRODUCT When replacing the fuse, be sure to only use a fuse of the rating specified on this product. To avoid short-circuiting, cover any disconnected leads with insulating tape. It is especially important to insulate any unused wires, which if left uncovered may cause a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. The black cable is ground, make sure to connect the ground wire first.
SUGGESTED MOUNTING METHODS ENGLISH The PATV65 can be mounted in two different configurations: 1 SURFACE MOUNT To surface mount use double sided tape or velcro. (not included) 2 HANDLEBAR MOUNT Use the provided handelbar clamp kit, try the best method for your application, securely tighten all components.
GETTING STARTED 3 A ENGLISH GETTING TO KNOW YOUR PATV65 MULTIFUNCTION CONTROLLER (MFC) 4 2 5 1 6 10 9 8 7 A MFC - MULTIFUNCTION CONTROLLER 1 VOLUME DOWN 2 VOLUME UP 3 LED DRIVING LAMP - ON/OFF 4 PLAY/PAUSE 5 NEXT TRACK 6 PREVIOUS TRACK 7 SYSTEM POWER - ON/OFF 8 POWER / SOURCE - RED = AUX-IN MODE / BLUE = BT MODE 9 BLUETOOTH PAIRING INDICATOR - BLUE COLOR 10 3.
RGE USB CHA BLUETOOTH OPERATION 5V 1A ENGLISH 7 9 5V 1A USB CHARGE 8 Nyne C PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION 1) Power on the PATV65 by pressing and holding down the 7 Power button for 3 seconds, the 9 BLUE and 8 RED LEDs will start to alternately flash, signalling that the PATV65 is now ready for Bluetooth pairing. Tips: EN NOTE: You have 2 minutes before you must restart this procedure over again. 2) Now that the PATV65 is in pairing mode: ANDROID users: a.
RGE USB CHA BLUETOOTH OPERATION 5V 1A ENGLISH 5V 1A 7 USB CHARGE Nyne C RECONNECTION EN 2) The unit will now automatically reconnect, the BLUE LED will be ON. Tips: 1) Power on the PATV65 and your last paired device Bluetooth. 3) If your device was previously paired with the PATV65, but it wasn’t the last paired device: a. Ensure no other devices are currently paired b. Enter the Bluetooth Menu on your device being paired c. “Planet Audio” will display under AVAILABLE DEVICES d.
Nyne Cruis er STREAMING MUSIC E 5V 1A 2 USB CHARG ENGLISH 4 5 YOUR DEVICE 6 1 5V 1A USB CHARGE MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION Nyne ps: EN 1) Press the 4 PLAY/PAUSE once to start playing music or press the PLAY button from your device touch screen, press again to PAUSE 2) To skip songs or advance, press the NEXT TRACK 5 3) To select the previous song, press the PREVIOUS TRACK VOLUME CONTROL 1) To raise the VOLUME press UP 2 2) To lower the VOLUME press DOWN 6 button 1
AUX-INPUT 4 2 5 10 YOUR CABLE 1 7 AUX-IN OPERATION 6 PATV65 can play audio from any device that has a 3.5mm headphone audio jack. 1) Power on the PATV65 by pressing and holding down the POWER 2 seconds 2) Connect the 3.5mm AUX-IN on the MFU to a 3.5mm adaptor (3.
INFORMATION TO THE USER ENGLISH FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by user.
TROUBLE SHOOTING GUIDE CAUSE SOLUTION The fuse is blown Check / replace the fuse Bad accessory power connection Check accessory power port for proper operational voltage Blown speaker Replace faulty speaker Volume is low / muted Press the volume level up Device is paused or muted Check your devices playing / volume status The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the Bluetooth function The PATV65 memory is full Turn off the la