Wireless Flash Trigger This manual Is currant update of 1st March, 2010. ct fo PIXEL service center for further P aw n retesting of tha combining usage with products released after this day. Product Manual Croce [is PIXEL INC Made In China Hitachi www. megapixel §0707 V20.
Contents IE Overview 01 High-performance of PAWN 02 Caution before use: be 03 Included Items _ 05 Name of sate part 08 Basic Operation 08 Install and change Eatery 08 Device installation 14 Device connection 18 Function setting -22 Usage 28 PIXEL PAWN Specifications 29
Thank you for purchasing high performance Pixel Pawn product! The functions of Pawn Included flashgun trigger, stud highlighter and wireless shutter control. The flash sync sped is up to 1/3208. The shutter control mode included single, continuous, BULB and sec delay shooting. Pawn Is using global free channel 2.4GHz apd FSK modulation system to aka the performance more stable.
al ignore use ® maw ~ . Make sure the camera and flashgun are all prows off before use the device. . As Pawn Is electronics product, the function will be Influenced by the environment. That may cause the abnormality working of camera and flashgun. However, the condition would happen with small possibility. . Please don't pull the cable when connecting tH trigger Don't let the product vibraphonist, otherwise jt possible cays tig product break down. .
Ee: ems PAWN TX contact with the distributor directly. 1st PAWN RX AAA lithium battery CR-2032 battery { which Installed In the product ) cable 3.5mm switch to 8.35 plug 1st apes pe 1pe pe © Shutter control cable Canon Nikon TEL363/for Sony Olympus/ Panasonic © User manual © Receiver holding mount 0: Hot shoe protection cover 4 Shutter release cable is compatible with camera model. Please check the package and ake strife tha blow saint are already In the box.
84 indicator Light © Power Swi Lacking Screw Power Supply Locking screw Channel switch Battery Hatch dl! ra) Install and change the battery: When the operate distance decrease obviously or ths Indicator light getting dark or the channel of trigger goes wrong frequently, you need to tangs the battles. Pawn Transmitter Please follow the steps to replace the Install tha batter 1) Slide and pan the battery hatch. 2} Less press the metal spring to outwards and take the: battery.
i asl erst Pawn Receiver: Please follow the steps to replay 1) Slide and open the battery hatch, 2) Press the battery the battery. 3) Install the new batch: hatch; press the hatch. Please take Installation.
asl erst Power switch: Pawn Transmitter Because of the transmitter Is using ultra-low stand power consumption: transmitter. It'll automatic enter to standby after install the battery. Pawn Receiver + Push the power swi Indicator light will fish red light very 2 seconds t&: Indicate the revolver Is under receiving staph 2 therapist power switch on the h [ON] to turn‘en the power, the « Push the power switch. [OFF] -to turn off the power, the Indicator ago turned off.
asl erst Removes the transmitter. 1} Turn off the calamity Bower. 2) According to the reverse steps ta remove the transmitter from camera. & It may miss communicate or drag the receiver from the hot hog mount, If pins not Inserted to the hols or the locking screw s,not tighten. € If It's unable to pull the transmitter out from the wafer, please make locking screw Is released completely. & Never pull the transmitter formality; otherwise you'll break-dhow th camera.
The tripod screw Cali bia Hilda 6H light std; Stand mount and any holder which having the Install the screw nut. 1) Follow the p ¢ screws right direction 2) Insert the flashgun B stand as picture sh 3) Follow the picture the lacking screw as Watt direction Receiver mounts lightheartedness: 1) Follow the picture shown to loose thé locking wires as right direction 2) Insert the flashgun on tha light stand as picture shown.
I asl erst dl! ra) 1 Install the receiver to studio light. Receiver connects to flashgun 1) Ramos the bottom sticker from [TE-36V] and stick it or Before Insert the flashgun ori this receiver; please make sure the flash power Is off, and g 2 Studio foe Batu. i turned on the receiver-paws with finished the channel setting. 3) Insert the receiver on the [TE-36V] haste pirouette, ~ 4) Tight the locking screw:to: daft.
asl erst 2) Insert the flashgun ol Install the flashgun sn TF=362RX 1) Turn the locking screw O'Toole for release the hot shoe lack. Install the flashgun on TF-363RX Insert the flashgun fo the receivership shoe direct: Press the release button to pull out from hot shoe when remove the flashgun. TF-384RX installation is same as TF-361RX n the resolver hot shoat, 3} Turn the locking screw to right for tight flashlight. dl! ra) Connect the receiver with the studio light. Using the item 3.
I anneal trans 1 : oun channel switch Is-Insula the battery hatch. Set the transmitter function Ham You can set different function of transmitting when using shutter release to shoot. + When using multi~get Pawn in the same area, you may ends to aching to difference channel. 11 Press "SET" of transmitter, the function indicator light up and show the current function + Finish the channel settling; you need to double check the receiver and transmitter are In the mode. channel.
sage 3) Fully press the came) flashgun to sync fleas} Fire the flashgun 1) Check very parch and see's it connected completely; parameter set already. 2) Half press the camera Shiite release, the transmitter ths “sleeping” flashgun (Flash in Standby mode). 45 When using the train ng: emitter chichis not compatible ihe power all muted on, flashgun send out the signal and wake up a shutter release, transmitter send out flash signal and trigger ths.
Continuous shoot (or [BULB] shoot) function’ 1) Press “SET”: button of transmitter slightly; setts function mode as 2) Set camera function as [ Jor [BULB]. 2) Half press the release button ti send out the focus signal. Transmitter and receiver are showing green as indicator light. Camera is under loci the button. 4) Full press the release button to send out the shooting as Indicator one time; receiver Is esp boinking red as to shoot. Indicator light.
I sage Daley shoot function 1) Press “SET” button of transmitter, and dat the function 3) Half press the release button te send out the focus si showing green as Indicator light. Samara ls under foc) the button. 4) Full press ths release button to send out the shooting = as indicator one time; receiver is keep blinking red as to shoot. 5) After complete the counting, abrasive indicator light is nal. Transmitter and receiver are ls state until released or pressed signal.
Dimensions Type: Using FSK 2.4GHz Wireless Remote Control System Channel: 18 Transmitter standby time: 2 years (using the GR -2032 Lithium battery) Receiver standby time: 300 hours {using the AAA battery) i Transmitter: mm» 28 mm x 31mm Relevance: 66mm: Transmitter: 32.5¢ (with battery) Receiver: 60.5 g (with battery) Now you can start to use unique high-performance PIXEL product PAWN, If you have any questions you can contact tha local distributor.