DR900X-2CH ENGLISH
BLACKVUE DR900X-2CH For manuals, customer support and FAQs go to www.blackvue.
Important safety information For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. yy Do not disassemble, repair, or modify the product yourself. Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center. yy Do not adjust the product while driving. Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. It is desirable that it be installed and operated with at least 20cm or more between the radiator and a person’s body (excluding extremities: hand, wrists, feet, and ankles). Disposal of your BlackVue dashcam 1.
IC Compliance his Class [A] digital apparatus complies with Canadian ICES-003. - IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appreils radio exempts de license.
ENGLISH In the box Check the box for each of the following items before installing the BlackVue dashcam. Front camera Quick start guide Cigarette lighter power cable Hardwiring power cable Double-sided tape for the Mounting Brackets Cable clips (8 EA) microSD Card microSD card reader Rear camera Rear camera connection cable Pry tool Need help? Download the manual (including FAQs) and the latest firmware from www.blackvue.com Or contact a Customer Support expert at cs@pittasoft.
At a glance The following diagrams explain each part of the BlackVue dashcam. Front camera 118.5 mm Mounting bracket 7 Camera lens 36 mm 55 mm Lock button BLACKVUE Front security LED : Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode. : Blinks slowly during parking mode motion detection standby.
ENGLISH GPS/BT LED : Lights blue when (i) GPS is on, and/or (ii) Bluetooth is paired. : Blinks blue slowly when bluetooth is in pairing mode. : Blinks blue quickly when (i) GPS is turning off, and/or (ii) Bluetooth is turning off. Speaker LTE/Wi-Fi LED : Lights yellow when LTE is connected. : Lights white when Wi-Fi is connected. : Blinks white slowly when connecting to Wi-Fi. : Blinks white quickly when Wi-Fi is turning off. Recording LED : Lights orange in normal mode.
Proximity Sensor LED : Lights when proximity sensor is triggered. Proximity Sensor: Touch or wave a finger within 20mm of the sensor to trigger a customizable function. Available options: -- Turn on/off audio recording (default) -- Manual recording trigger -- Off Rear camera connection port Micro USB port DC in (power connector) Cover microSD card slot Wi-Fi button: -- Press once to turn on/off Wi-Fi.
Camera lens 25 mm 31 mm Mounting bracket ENGLISH Rear camera 67.4 mm V out (Front camera connection port) Rear security LED : S tays on in all recordings modes but can be turned off from firmware settings.
Warning yy Do not install the product in a location where it can obstruct the driver's field of vision. Turn off the engine. Open the cover of the microSD card slot, gently push the card into the slot until it locks into place and close the cover. Peel off the protective film from the double-sided tape and attach the front camera to the windshield behind the rear-view mirror.
Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera. Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear camera connection cable. Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable.
Connectivity Module (Optional): Connect the connectivity module to the front camera and attach it to the edge of the window. Use the pry tool to tuck in the cable. Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Skip to for Hardwiring Power Cable setup. Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord. Rear camera connection cable Power cord Turn on the engine. The BlackVue dashcam will power up and start recording.
After removing fuse panel cover, find a fuse that powers on when engine is turned on(ex.cigarette lighter socket, audio, etc) and another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light). Connect the ACC+ cable to a fuse that powers on after engine start, and BATT+ cable to a fuse that remains powered on after engine is turned off. Note yy To use battery saver feature, connect the BATT+ cable to the hazard light fuse.
STEP 2 Playback Playing video files on your smartphone (Android/iOS) Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone. “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi: (i) Go to your smartphone’s Settings then select Wi-Fi, and make sure Wi-Fi is turned on. (ii) Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g. BlackVue900X-******).
ENGLISH (iv) Open the BlackVue app and select WI-FI. Select the video file you want to play from the video list. Note yy The playback of 4K UHD resolution, 'Highest' image quality and/or H.265 coded videos depends on your device's hardware and software. Older devices may not support 4K UHD, 'Highest' image quality or H.265 video playback. If you encounter issues please check your device's video playback capabilities.
Playing video files on your computer (Windows/macOS) Remove the microSD card from the dashcam. Open side cover To remove Insert the card into the microSD card reader and connect it to a computer. Download BlackVue Viewer program from www.blackvue.com > Support > Downloads and install it on your computer.
Windows/macOS Viewer Note yy The playback of 4K UHD resolution and/or H.265 coded videos depends on your computer's hardware and software. Older computers may not support 4K UHD or H.265 video playback. If you encounter issues please check your computer's video playback capabilities. yy All images shown are for illustration purpose only. Actual program may differ from images shown. DR900X-2CH 18 ENGLISH Run BlackVue Viewer.
STEP 3 Changing dashcam's time zone, Wi-Fi password and other settings. The dashcam's time zone is initially set to (GMT-11). To display the correct time please select your time zone. Using your smartphone (Android/iOS) “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi (for details see STEP 2 ‘Playing video files on your smartphone’). Open the BlackVue app and select WI-FI. Tap the button to access the Firmware settings menu. (i) Select Firmware settings > Basic > Time.
DR900X-2CH 20 ENGLISH Go back to the Firmware settings menu and configure other desired settings. Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off), LEDs on/ off, voice guidance volume, Cloud settings etc. Once settings are configured, tap and tap Save.
Changing the dashcam's time zone and other firmware settings on your computer (Windows/macOS) Run BlackVue Viewer program after connecting dashcam's microSD card to your computer. Click on the button to open the BlackVue settings panel. Settings Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off ), LEDs on/off, voice guidance volume, Cloud settings etc.
Connect to BLACKVUE CLOUD (optional) If you don’t have a mobile Wi-Fi hotspot, Blackvue connectivity module or if you don’t want to use the BLACKVUE CLOUD service, you can skip this step. If you have a mobile Wi-Fi hotspot (also known as a portable Wi-Fi router), BlackVue connectivity module (CM100LTE), a car-embedded wireless internet network or a Wi-Fi network near your car, you can use the BlackVue app to connect to BLACKVUE CLOUD and see in real-time where your car is and the dashcam’s live video feed.
QR Code: Press Scan QR Code and line up the QR Code on your smartphone’s screen. QR code / Cloud code / Serial number or Manual registration: Enter your camera’s Serial number and Cloud code and press Register. Connect your BlackVue dashcam to a Wi-Fi hotspot for Cloud connectivity (i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on.
(v) Choose your Wi-Fi hotspot from the list. Enter the password and tap OK. Note yy Up to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and work). DR900X-2CH 24 ENGLISH (iv) Ensure Enable Cloud service is on. Select Cloud service hotspot settings.
and tap Save. (vi) Go back to the Firmware settings menu, tap After rebooting, your dashcam will automatically establish internet connection. If internet connection was not established, please ensure Wi-Fi information was inserted correctly. Select CLOUD from the main screen to access all of the Cloud features. Note yy If LTE and Wi-Fi hotspot is available for internet connection, Wi-Fi hotspot will be in priority. If LTE connection is preferred at all times, please remove Wi-Fi hotspot information.
(iv) Configure the APN settings to activate the SIM card. For detailed information, please check "SIM activation guide" in the packaging box or visit BlackVue Help Center: www.helpcenter.blackvue.com -> LTE connectivity guide. (v) Once your dashcam is connected to the internet, you can go to the CLOUD menu to use BlackVue Cloud features. Note yy For full details, refer to the "SIM activation guide" that is included in the CM100LTE package.
Tips for optimal performance For stable operation of the dashcam, it is recommended to format the microSD card once a month. Format using BlackVue Viewer (Windows): Download BlackVue Windows Viewer from www.blackvue.com > Support > Downloads and install it on your computer. Insert the microSD card into the microSD card reader and connect the reader to your computer. Launch the copy of BlackVue Viewer that is installed on your computer. Click the Format button, select the card drive and click OK.
Model Name Color/Size/Weight Memory Recording Modes ENGLISH Product specifications: DR900X-2CH Front: Black / Width 118.5 mm x Height 36 mm / 106 g Rear: Black / Width 67.4 mm x Height 25 mm / 25 g microSD Card (32 GB / 64 GB / 128 GB / 256 GB) Normal recording, Event recording (when impact is detected in normal and parking mode), Manual recording and Parking recording (when motion is detected) * When using Hardwiring Power Cable, ACC+ will trigger parking mode.
Microphone Built-in Speaker (Voice Guidance) Built-in LED Indicators Front: Recording LED, GPS/BT LED, LTE/Wi-Fi LED, Front Security LED, Proximity Sensing indicator LED Rear: Rear Security LED Button Wi-Fi button: * Press once to turn on/off Wi-Fi. Proximity sensor: Touching the proximity sensor turns on/off audio recording or triggers manual recording depending on the firmware settings.
ENGLISH Certifications Front: FCC, CE, RoHS, Telec, WEEE, IC Rear: FCC, CE, RoHS, WEEE Software BlackVue Viewer * Windows 7 or higher and Mac Yosemite OS X (10.10) or higher Application BlackVue Application (Android 5.0 or higher, iOS 9.
Product Warranty The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/ microSD Card: 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request.
Notes
Notes
Notes
FCC ID: YCK-DR900X-2CH / HVIN : DR900X-2CH DR900X-2CH Headquarter Pittasoft 4F, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, 13488 Service Center instagram.