DR750X Plus l DR750X-1CH Plus l DR750X-2CH Plus ENGLISH
BLACKVUE DR750X Plus l DR750X-1CH Plus l DR750X-2CH Plus For manuals, customer support and FAQs go to www.blackvue.
Important safety information For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. y Do not disassemble, repair, or modify the product yourself. Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center. y Do not adjust the product while driving. Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CAUTION Any changed or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. CE WARNING y Changes and modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ICC Compliance This Class [B] digital apparatus complies with Canadian ICES-003. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
ENGLISH In the box Check the box for each of the following items before installing the BlackVue dashcam.
At a glance The following diagrams explain each part of the BlackVue dashcam. Front camera 118.5 mm Mounting bracket 8 Camera lens 36 mm 55 mm Lock button BLACKVUE Front security LED : Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode. : Blinks slowly during parking mode motion detection standby.
ENGLISH GPS LED : Lights blue when GPS is on. :B links blue quickly when GPS is turning off. Speaker LTE/Wi-Fi LED : Lights yellow when LTE is connected. : Lights white when Wi-Fi is connected. : Blinks white slowly when connecting to Wi-Fi. : Blinks white quickly when Wi-Fi is turning off. Recording LED : Lights orange in normal mode. : Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started. : Lights green in parking mode when motion is detected.
Proximity Sensor LED : L ights when proximity sensor is triggered. Proximity Sensor: Touch or wave a finger within 20mm of the sensor to trigger a customizable function. Available options: - Turn on/off audio recording (default) - Manual recording trigger - Off Rear camera connection port Micro USB port DC in (power connector) Cover microSD card slot Wi-Fi button: - Press once to turn on/off Wi-Fi.
Camera lens 25 mm 31 mm Mounting bracket ENGLISH Rear camera (DR750X-2CH Plus only) 67.4 mm V out (Front camera connection port) Rear security LED : S tays on in all recording modes but can be turned off from firmware settings. Note y For DR750X-1CH Plus user, the BlackVue rear camera is an optional accessory.
STEP 1 Install and power up Install the front camera behind the rear view mirror. Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield before installation. Note y For DR750X-1CH Plus user, the BlackVue rear camera is an optional accessory. Warning y Do not install the product in a location where it can obstruct the driver's field of vision. Turn off the engine.
Adjust the angle of the lens by rotating the body of the front camera. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera. Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear camera connection cable.
Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable. Rear camera connection cable Connectivity Module (Optional): Connect the connectivity module to the front camera and attach it to the edge of the window. Use the pry tool to tuck in the cable. Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Skip to for Hardwiring Power Cable setup.
Locate the fuse box to connect the hardwiring power cable. Note y Location of the fuse box differ by manufacturer or model. For details, refer to the vehicle owner's manual. -1 After removing fuse panel cover, find a fuse that powers on when engine is turned on(ex.cigarette lighter socket, audio, etc) and another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light).
-2 Connect the GND cable to metal ground bolt. M Connect the power cable to the DC in terminal of the front camera. BlackVue will power up and start recording. Video files are stored on the microSD card. Note y When you run the dashcam for the first time the firmware is automatically loaded onto the microSD card. After the firmware has been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
Playback Playing video files on your smartphone (Android/iOS) Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone. “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct. (i) Press the Wi-Fi button once to turn on Wi-Fi. (ii) Go to your smartphone’s Settings then select Wi-Fi, and make sure Wi-Fi is turned on. (iii) Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g.
(v) Open the BlackVue app and select Wi-Fi. Select the video file you want to play from the video list. Note y Wi-Fi direct lets you connect your smartphone to your dashcam via Wi-Fi within a range of 10m. y For quick playback and download of the recordings, you can select the “Quick play file” option from App settings. y All image shown are for illustration purposes only. Actual App may differ from images shown.
Remove the microSD card from the dashcam. Open side cover To remove Insert the card into the microSD card reader and connect it to a computer. Download BlackVue Viewer program from www.blackvue.com > Support > Downloads and install it on your computer.
Run BlackVue Viewer. To play, select a video and click on the play button or double click the selected video. Windows/macOS Viewer Note y All images shown are for illustration purpose only. Actual program may differ from images shown.
Changing dashcam's time zone, Wi-Fi password and other settings. The dashcam's time zone is initially set to (GMT-11). To display the correct time please select your time zone. Using your smartphone (Android/iOS) “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct (for details see STEP 2 ‘Playing video files on your smartphone’). Open the BlackVue app and select Wi-Fi. Tap the button to access the Firmware settings menu. (i) Select Firmware settings > Basic > Time.
Go back to the Firmware settings menu and configure other desired settings. Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off), LEDs on/ off, voice guidance volume, Cloud settings etc. Once settings are configured, tap and tap Save.
Run BlackVue Viewer program after connecting dashcam's microSD card to your button to open the BlackVue settings panel. computer. Click on the Settings Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off ), LEDs on/off, voice guidance volume, Cloud settings etc. For more information about changing the settings in BlackVue Viewer, please refer to the manual from www.blackvue.com > Support > Manuals.
STEP 4 Connect to BLACKVUE CLOUD (Optional) If you don’t have a mobile Wi-Fi hotspot, Blackvue connectivity module or if you don’t want to use the BLACKVUE CLOUD service, you can skip this step.
QR code / Cloud code / Serial number or Manual registration: Enter your camera’s Serial number and Cloud code and press Register. Connect your BlackVue dashcam to a Wi-Fi hotspot for Cloud connectivity (i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on. (ii) “Pair” your smartphone with the BlackVue dashcam via Wi-Fi direct (for details see STEP 2 ‘Playing video files on your smartphone’) (iii) Open the BlackVue app. Select Wi-Fi > > Firmware settings > Cloud.
(iv) Ensure Enable Cloud service is on. Select Cloud service hotspot settings. (v) Choose your Wi-Fi hotspot from the list. Enter the password and tap OK. Note y Up to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and work). y The BlackVue DR750X Plus dashcam is not compatible with 5GHz wireless networks.
and tap Save. After rebooting, your dashcam will automatically establish internet connection. If internet connection was not established, please ensure Wi-Fi information was inserted correctly. Select Cloud from the main screen to access all of the Cloud features. Note y If LTE and Wi-Fi hotspot is available for internet connection, Wi-Fi hotspot will be in priority. If LTE connection is preferred at all times, please remove Wi-Fi hotspot information.
(i) Locate the SIM card slot. Unscrew the bolt from SIM slot cover. Then, unmount the SIM slot by using a SIM eject tool. Insert SIM in the SIM slot. Mount the SIM slot back in the connectivity module, then, screw the bolt to hold SIM slot cover. (ii) "Pair" your smartphone with the BlackVue dashcam via Wi-Fi direct. (iii) Open the BlackVue app and select Wi-Fi > . SIM card activation (iv) Configure the APN settings to activate the SIM card.
ENGLISH Note y For full details, refer to the "SIM activation guide" that is included in the CM100LTE package. y To use the BlackVue Cloud Service, SIM card must be properly activated for Internet access via LTE network. y When the dashcam is connected to internet, you can use BlackVue Cloud features such as remote Live View and Video playback, Real-time location, push notification, Auto-upload, remote Firmware update etc. on BlackVue app and PC Viewer.
Tips for optimal performance For stable operation of the dashcam, it is recommended to format the microSD card once a month. Format using BlackVue Viewer (Windows): Download BlackVue Windows Viewer from www.blackvue.com > Support > Downloads and install it on your computer. Insert the microSD card into the microSD card reader and connect the reader to your computer. Launch the copy of BlackVue Viewer that is installed on your computer. Click the Format button, select the card drive and click OK.
Speaker (Voice Guidance) Built-in LED Indicators Front: Recording LED, GPS LED, LTE/Wi-Fi LED, Front Security LED, Proximity Sensing indicator LED Rear: Rear Security LED Button Wi-Fi button: * Press once to turn on/off Wi-Fi. Proximity sensor: Touching the proximity sensor turns on/off audio recording or triggers manual recording depending on the firmware settings. Sensor 3-Axis Acceleration Sensor Backup Battery Input Power Built-in super capacitor DC 12V-24V (3 pole DC Plug (Ø3.5 x Ø1.
High Temperature Cut-Off Certifications Software Application Others -20 °C − 80 °C (-4 °F − 176 °F ) Approx. 80 °C (176 °F) Front: FCC, ISED, CE, UKCA, RoHS, Telec, WEEE Rear: FCC, ISED, CE, UKCA, RoHS, WEEE BlackVue Viewer * Windows 7 or higher and Mac OS X Sierra (10.12) or higher BlackVue Application (Android 5.0 or higher, iOS 11.0 or higher) Adaptive Format Free File Management System * STARVIS is a trademark of Sony Corporation.
Product Warranty The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/ microSD Card: 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request.
Notes
DR DR750X-1CH Plus: FCC ID : YCK-DR750XP / HVIN : DR750X-1CH Plus DR750X Plus / DR750X-2CH Plus: FCC ID : YCK-DR750XP / HVIN : DR750X-2CH Plus DR750X Plus, DR750X-1CH Plus, DR750X-2CH Plus Address A 4th floor, ABN Tower, 331, Pangyo-ro, Bundang-gu Seongnam-si, Gyeonggi-do South Korea instagram.