Peplink Balance Multi-WAN Bonding Routers User Manual For Model ONE/20/30/30 LTE/210/310/305/380/580/710/1350/2500 Peplink Balance Firmware 6.1 Copyright & TrademarksSpecifications are subject to change without prior notice. Copyright © Peplink International Ltd. All Rights Reserved. Peplink and the Peplink logo are trademarks of Peplink International Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
USER MANUAL Peplink Balance Series TABLE OF CONTENTS 1 INTRODUCTION AND SCOPE ······························································································6 2 GLOSSARY ··························································································································7 3 PRODUCT COMPARISON CHART ························································································8 4 PRODUCT FEATURES ···························································
USER MANUAL Peplink Balance Series 11.3 11.4 11.5 11.6 12 BANDWIDTH BONDING SPEEDFUSIONTM ·········································································90 12.1 12.2 12.
USER MANUAL Peplink Balance Series 22.8 23 SYSTEM SETTINGS ··········································································································177 23.1 23.2 23.3 23.4 23.5 23.6 23.7 23.8 23.9 23.
USER MANUAL Peplink Balance Series E.5 E.6 E.7 E.8 E.
USER MANUAL Peplink Balance Series 1 Introduction and Scope The Peplink Balance series provides link aggregation and load balancing across up to thirteen WAN connections. The Peplink Balance 20/30/30 LTE provides a cost-effective solution suitable for power users and home offices. The Peplink Balance 210/310 provides advanced features for small business. The Peplink Balance 380, 580, 710, 1350, and 2500 come with a suite of advanced enterprise-class features.
USER MANUAL Peplink Balance Series Glossary 2 The following terms, acronyms, and abbreviations are frequently used in this manual: Term Definition 3G 3rd generation standards for wireless communications (e.g., HSDPA) 4G 4th generation standards for wireless communications (e.g.
USER MANUAL Peplink Balance Series Product Comparison Chart 3 Features 20 30 30 LTE 210 310 380 580 710 1350 2500 WAN Ports (GbE) / Internet Links 2 3 2 2 3 3 5 7 13 12 USB WAN Modem Port 1 1 1 1 1 1 1 1 1 1 Embedded LTE Modem X X 1 X X X X X X X Recommended Users 1-25 1-25 1-25 1-50 1-50 50-500 300-1000 5002000+ 10005000+ 500020000+ Router Throughput 100M 100M 100M 100M 100M 200M 400M 800M 1500M 8Gbps Yes Yes Yes Yes Yes Yes Yes Ye
USER MANUAL Peplink Balance Series l Lowest Latency X X X Yes Yes Yes Yes Yes Yes Yes Drop-In Mode X X X Yes Yes Yes Yes Yes Yes Yes Inbound Load Balancing X X X Yes Yes Yes Yes Yes Yes Yes 4G/3G Modem Support Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes SpeedFusionTM X X X Yes Yes Yes Yes Yes Yes Yes Number of SpeedFusionTMPeer Bonded VPN Throughput X X X 2 2 20 50 300 800 4000 X X X 30M 30M 60M 80M 150M 350M 2Gbps Yes Yes Yes Yes
USER MANUAL Peplink Balance Series Application Prioritization X X X Yes Yes Yes Yes Yes Yes Yes Application Prioritization by User Group User Group Bandwidth Reservation Individual Bandwidth Limit X X X X X Yes Yes Yes Yes Yes X X X X X Yes Yes Yes Yes Yes X X X X X Yes Yes Yes Yes Yes NAT and IP Forwarding Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Static Routes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Port Forwarding Yes Yes Yes Yes Yes Ye
USER MANUAL Peplink Balance Series Web Reporting Services Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Email Notification Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Syslog Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes SNMP v1, v2c and v3 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 4 4 4 4 4 1 1 1 1 8/ 2(10GbE SFP+) 9-16V DC 9-16V DC 9-16V DC 9-16V AC DC 9-16VDC 100V to 240V AC 100V to 240V AC 100V to 240V AC 100V to 240V AC 15W 15W 15W 15W 15W 100V to 240V
USER MANUAL Peplink Balance Series Product Features 4 Peplink Balance series products enableall LAN users to sharebroadband Internet connectionsand provide advanced features to enhanceInternet access. The following is alist of supported features: 4.1 Supported Network Features 4.1.
USER MANUAL Peplink Balance Series 4.1.4 Inbound Traffic Management TCP/UDP traffic redirection to dedicated LAN server(s) Inbound link load balancing by means of DNS(available on Peplink Balance 210+) 4.1.5 Outbound Policy Link load distribution per TCP/UDP service Persistent routing for specified source and/or destination IP addresses per TCP/UDP service Prioritize and route traffic to VPN tunnels with Priority and Enforced algorithms 4.1.
USER MANUAL Peplink Balance Series Remote reporting to Peplink Balance reporting server Hardware High Availability via VRRP, with automatic configuration synchronization(Available on Peplink Balance 210+) Real-Time, Hourly, Daily and Monthly Bandwidth Usage reports and charts Hardware backup via LAN bypass (Available on Peplink Balance 580, 710, 1350 and 2500) Built-in WINS server Time server synchronization SNMP Email notification Syslog SIP passthrough PPTP packet pa
USER MANUAL Peplink Balance Series Package Contents 5 The contents of Peplink Balance product packages are as follows: 5.1 5.2 5.3 5.
USER MANUAL Peplink Balance Series 6 Peplink Balance Overview 6.1 Peplink Balance One 6.1.1 Front Panel Appearance LAN Ports WAN Ports Wi-Fi LED Reset Button USB Port . Status LED 6.1.
USER MANUAL Peplink Balance Series 6.1.3 Rear Panel Appearance Power Connector 6.1.4 Product Label http://www.peplink.
USER MANUAL Peplink Balance Series 6.2 Peplink Balance 20 6.2.1 Front Panel Appearance USB Port WAN Ports Reset Button LAN Ports Status LED Power LED 6.2.
USER MANUAL Peplink Balance Series 6.2.3 Rear Panel Appearance Power Connector Kensington Security Slot 6.2.4 Unit Base Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.3 Peplink Balance 30 6.3.1 Front Panel Appearance USB Port WAN Ports Reset Button LAN Ports Status LED Power LED 6.3.
USER MANUAL Peplink Balance Series 6.3.3 Rear Panel Appearance Power Connector Kensington Security Slot 6.3.4 Unit Base Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.4 Peplink Balance 30 LTE 6.4.1 Front Panel Appearance USB Port WAN Ports Reset Button LAN Ports Status LED Power LED 6.4.
USER MANUAL Peplink Balance Series 6.4.3 Rear Panel Appearance Power Connector Cellular SIM Slot 6.4.4 Unit Base Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.5 Peplink Balance 210 6.5.1 Front Panel Appearance WAN Ports USB Status LED Power LED LAN Ports Reset Button 6.5.
USER MANUAL Peplink Balance Series 6.5.3 Rear Panel Appearance Power Connector 6.5.4 Unit Base Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.6 Peplink Balance 310 6.6.1 Front Panel Appearance USB WAN Ports LAN Ports Status LED Power LED Reset Button 6.6.
USER MANUAL Peplink Balance Series 6.6.3 Rear Panel Appearance Power Connector 6.6.4 Unit Base Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.7 Peplink Balance 305 6.7.1 Front Panel Appearance Power LED LAN Port LCD Display WAN Ports USB Ports LCD Controls Console 6.7.
USER MANUAL Peplink Balance Series 6.7.3 LCD Display Menu > HA State: Master/Slave > LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.7.4 Rear Panel Appearance Power Switch Power Connector Connector Ports Power Connector AC input 110/220V Switch Power Switch Pressing and holding the key for 4 seconds will power down the unit. When the unit is powered off, press it will power on the unit 6.7.5 Unit Label Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.8 Peplink Balance 380 6.8.1 Front Panel Appearance LAN Port Power LED LCD Display WAN Ports USB Ports LCD Controls Console 6.8.
USER MANUAL Peplink Balance Series 6.8.3 LCD Display Menu > HA State: Master/Slave > LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.8.4 Rear Panel Appearance Power Switch Power Connector Connector Ports Power Connector AC input 110/220V Switch Power Switch To hold pressing the key for 4 seconds will power down the unit When the unit is powered off, press it will power on the unit 6.8.5 Unit Label Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.9 Peplink Balance 580 6.9.1 Front Panel Appearance WAN Ports Power LED LCD Display LAN Port USB Ports Console LCD Controls 6.9.
USER MANUAL Peplink Balance Series 6.9.3 LCD Display Menu > HA State: Master/Slave > LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.9.4 Rear Panel Appearance Power Switch Power Connector Connector Ports Power Connector AC input 110/220V Switch Power Switch To hold pressing the key for 4 seconds will power down the unit When the unit is powered off, press it will power on the unit 6.9.5 Unit Label Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.10 Peplink Balance 710 USB Ports 6.10.
USER MANUAL Peplink Balance Series 6.10.2 LCD Display Menu > HA State: Master/Slave >LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.10.3 Rear Panel Appearance Reset Switch Power Switch Power Connector RS-232 Port Connector Ports RS-232 Port Power Connector Reserved for engineering use AC input 110/220V Switches Power Switch To hold pressing the key for 4 seconds will power down the unit When the unit is powered off, press it will power on the unit Reset Switch Press and release once to reset the system 6.10.4 Unit Label Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.11 Peplink Balance 1350 6.11.
USER MANUAL Peplink Balance Series 6.11.2 LCD Display Menu > HA State: Master/Slave >LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.11.3 Rear Panel Appearance Power Switch Power Connector Connector Ports Power Connector AC input 110/220V Switches Power Switch To hold pressing the key for 4 seconds will power down the unit When the unit is powered off, press it will power on the unit 6.11.4 Unit Label Appearance Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series 6.12 Peplink Balance 2500 6.12.1 Front Panel Appearance Console Port BPL-2500 USB Ports WAN Ports Power LED LCD Display LAN Port LCD Controls Console Port BPL-2500-SFP USB Ports WAN Ports Power LED LCD Display LAN Port LCD Controls http://www.peplink.
USER MANUAL Peplink Balance Series Status indicated in the front panel is as follows: LED Indicator Power LED OFF – Power off GREEN– Power on LAN andWAN Ports ORANGE – 1000 Mbps Right LED GREEN– 100 Mbps OFF – 10 Mbps Solid – Port is connected without traffic Left LED Blinking – Data is transferring OFF – Port is not connected Port Type Auto MDI/MDI-X ports Console & USB Ports Console Port USB Ports Reserved for engineering use For connecting a 4G/3G USB modem http://www.peplink.
USER MANUAL Peplink Balance Series 6.12.2 LCD Display Menu > HA State: Master/Slave >LAN IP > VIP > System Status > System > Firmware ver.
USER MANUAL Peplink Balance Series 6.12.3 Rear Panel Appearance Power Switch Power Connector Connector Ports Power Connector AC input 100-240V Switches Power Switch To hold pressing the key for 4 seconds will power down the unit When the unit is powered off, press it will power on the unit 6.12.4 Unit Label Appearance BPL-2500 Serial Number and LAN MAC Address BPL-2500-SFP Serial Number and LAN MAC Address http://www.peplink.
USER MANUAL Peplink Balance Series Installation 7 The following section details connecting the Peplink Balance to your network: 7.
USER MANUAL Peplink Balance Series http://www.peplink.
USER MANUAL Peplink Balance Series 7.3 Configuring the Network Environment To ensure that your Peplink Balance works properly in the LAN environment and can access the Internet via the WAN connections, please refer to the following setup procedures: LAN Configuration For basic configuration, refer to Section , Basic Configuration.
USER MANUAL Peplink Balance Series WAN Connection Settings WAN Connection Name This field is for defining a name to represent this WAN connection. Network Mode Users have to specify the Network they are on accordingly. Routing Mode This option allows you to select the routing method to be used in routing IP frames via the WAN connection. The mode can be either NAT (Network Address Translation) or IP Forwarding. Click the button to enable IP Forwarding.
