Surf SOHO Pepwave Surf SOHO Firmware 6.0 May 2013 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2013 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Table of Contents 1 INTRODUCTION AND SCOPE .............................................................................................. 3 2 GLOSSARY .......................................................................................................................... 4 3 PEPWAVE SURF SOHO OVERVIEW ..................................................................................... 5 4 INSTALLATION .................................................................................................
1 Introduction and Scope The Pepwave Surf SOHO provides link aggregation across multiple WAN connections, allowing a combination of technologies like 3G HSDPA, EVDO, 4G LTE, Wi-Fi, external WiMAX dongle, and Satellite to be utilized to connect to the Internet. This manual presents how to set up the Pepwave Surf SOHO Router and provides an introduction to the features and usage of Pepwave Surf SOHO Router. http://www.pepwave.
2 Glossary The following terms, acronyms, and abbreviations are frequently used in this manual: Term Definition 3G 3rd Generation standards for wireless communications (e.g. HSDPA) 4G 4th Generation standards for wireless communications (e.g.
3 Pepwave Surf SOHO Overview 3.1.1 Front Panel Appearance Status LED Wi-Fi LED 3.1.2 LED Indicators The statuses indicated by the Front Panel LEDs are as follows: Power and Status Indicators Wi-Fi Status OFF Power off Green Power on OFF System initializing Red Booting up or busy Green Ready state 3.1.
4 Installation Connecting the Network with Pepwave Surf SOHO Router: 4.1 Preparation Before installing Pepwave Surf SOHO Router, please prepare the following: At least one Internet/WAN access account and/or Wi-Fi access information. For each network connection, 4.2 Ethernet WAN: A 10/100 BaseT UTP cable with RJ45 connector USB: A USB modem Wi-Fi WAN: Wi-Fi antennas A computer with TCP/IP network protocol and a web browser installed.
5 Connecting to Web Admin Interface 1. Start a web browser on a computer that is connected with Pepwave Surf SOHO through LAN. 2. To connect to Web Admin Interface of Pepwave Surf SOHO, enter the following LAN IP address in the address field of the web browser: http://192.168.50.1 (This is the default LAN IP address of Pepwave Surf SOHO.) 3. Enter the following to access the Web Admin Interface. Username: admin Password: admin (This is the default Username and Password of Pepwave Surf SOHO.
Appendix B. Declaration Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
What are we doing at the moment? Follow us on Twitter! http://twitter.com/Peplink Want to know more about us? Add us on Facebook! http://www.facebook.com/peplink Difficulties when configuring the device? Visit Our YouTube Channel! http://www.youtube.com/PeplinkChannel Contact Us: Address: Sales United States Office 800 West El Camino Real, Mountain View CA 94040 United States Tel: +1 (650) 450 9669 Fax: +1 (866) 625 4664 http://www.pepwave.com/contact/sales/ Support http://www.pepwave.
