User's Guide

Package Contents
USER GUIDE
1
2
3 4
① Boltune True Wireless Stereo Earbuds (Buds live)
② 6 x Ear Tips (two are equipped on the earbuds)
③ 1 x Type-C Charging Cable
④ 1 x User Guide
①
②
③
④
⑤
⑥
⑦
⑧
L
R
Multifunction Touch Control
LED Indicator
Microphone
Charging Contacts
①
②
③
④
Charging Case
Type-C Charging Port
Charging Slot
Charging Indicator
⑤
⑥
⑦
⑧
Please read the instructions thoroughly before using this
product and retain it for future reference.
Warning: Please set the volume to proper level to avoid
hearing damages.
• Do not expose this product to high temperatures.
• Do not immerse the earbuds into water or expose them to
humidity for a long time.
• Do not clean the product with detergent containing
alcohol, ammonia, benzene or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not
in use and keep it away from children and pets to avoid
choking hazard.
• Unauthorized disassembly of any parts of this product is
forbidden, which may cause fire hazard, warranty
voidance, and/or property loss.
• Close attention is needed when using near children.
• Keep the charging case away from water, rain or any
other liquid.
• Don’ t use the product in thunderstorm to avoid malfunc-
tion or electric shock.
• Always ask a professional technician or authorized
personnel for repair.
This product contains lithium battery. Never expose
it to excessive heat such as direct sunlight or fire to
avoid explosion.
Ear tips with different sizes are included in the package, try
all sizes and choose the ones fitting you best.
Choose the Right Tips
Please wear the earbuds as shown below.
Wear the Earbuds
Pictures only
for reference.
Bluetooth Caution
• When the device is connected wirelessly to another
device, place the two devices close to each other to
achieve their normal functionalities and avoid possible
signal interference.
• When using a wireless connection, make sure there
are no obstacles between the two devices. Obstacles
including walls and fences may shorten the effective
range.
Note:
• Please fully charge the earbuds when using them for the first
time.
• When battery is low, a “Battery low” voice prompt will be
heard ( if you are wearing the earbuds). Please charge it in
time or the earbuds will turn off automatically around 10
minutes later.
• Charge the earbuds at least once every 3 months when not
using for a long time.
1. Connect the charging port with any USB charging adapter
or active computerUSB port.
2. The charging indicators will flash slowly.
Charging
1. Put the earbuds into the charging case as per the L (left)
and R (right) marks
2. Cover the lid and charging will start automatically.
L
R
Charging the Charging Case
Note:
• Unplug the charging cable (timely) once fully charged.
User Manual
Buds Live (LV08JL)
Thank you for purchasing PISEN Wireless Earphone.
Please read and keep this manual to ensure safety and
furture reference
.
Specifications
Model
Standby Time
Earbud Battery
Capsule Battery
Rated Voltage
Charging Time
Playback Time
Input
Product Diagram
Hearing Safety
How To Wear
Using Your Earbuds
Caution
Important Safety Instructions
• Do not wear earbuds with high volume for a long time to
avoid damaging your hearing.
• Set the earbuds to low volume before you put them on,
then increase the volume gradually as per your preference.
• Do not set volume too high to stay aware of your
surroundings.
• Please refer to local laws and regulations if you want to
answer phone calls via this device during driving.
• For your safety, avoid distraction from music or phone
calls when you are driving or doing other activities with
potential dangers.
Above data is from Pisen lab, they may vary from working
conditions or other possible reasons.
2 3 4
5
6 7 8
109 11 12
13
14 15
Note:
It is not recommended to wear the two earbuds on different
people. If needed, please keep the 2 earbuds within 3 meters
/ 9.8 feet in couple earbuds mode.
Remove the earbuds from the charging case and it start
automatically.
1. Put it in the charging Case and it shuts off automatically.
2. long Press for 10 seconds when the machine is on (it
cannot be turned off when playing music or talking).
3. Automatically shuts down after 3 minutes without connec-
tion.
• You can use one earbud or both earbuds as per your
preference. Please refer to the corresponding pairing
instructions.
• Before pairing, please turn off other Bluetooth devices and
place the device to be connected close to the earbuds.
• When the earbuds are disconnected from your device for
more than 10 minutes, they will turn off automatically.
1. Lift the lid and take out the earbuds, and they connect to
each other. The LED indicator on the main ear flashes
alternately red and blue to indicate that the earbuds is now
paired with the phone.
2. Turn on the Bluetooth function on your device and search
for nearby devices. Find “Buds live” in the searching results,
tap on the name to connect.
3. Connection successful: The indicator is off.
Power On
Pairing
3. Turn on the Bluetooth function on your device and search
for nearby devices. Find “Buds live” in the searching results,
tap on the name to connect.
4. Once connected, the LED indicator will go off.
1. Take out one earbud from the charging case, and make
sure the other one is placed in the charging case.
2. Tries to pair with the last device it pairs, and then goes into
pairing modeWhen pairing fails, its LED indicator blinks
alternately red and blue.
If you failed to pair your device with the earbuds, please clear
the pairing history as instructed below:
1. Place both earbuds in the charging case.
2. When the left and right earphones are off, press and hold
for 5 seconds to prompt a "beep" sound, and the red and
blue lights flash twice at the same time.
3. If you have paired your device with the earbuds before,
remove " Buds live" from the Bluetooth device list and pair
again.
4. Re-pair with your Bluetooth device as instructed in
“Pairing” section.
Clear Pairing List
L
R
Power Off
L
R
Couple Earbuds Mode
Single Earbud Mode
Note:
If you want to change to couple mode, simply take out the
other earbud from the charging case, they will pair with each
other automatically.
Note:
If you want to pair the earbuds with another device when you
have already paired them with a device, deactivate the
Bluetooth function on the paired device or clear “Buds live”
from its Bluetooth list. Restore the earbuds to factory settings
as instructed above if pairing failed.
1. Clean the earbuds and the charging case on a regular
basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a
long time.
5. Do not clean the product with detergent or chemicals.
Remove the earbuds from the charging
case and it start automatically
1、Put it in the charging case and it
shuts off automatically
2、long Press for 10 seconds when
the machine is on (it cannot be turned
off when playing music or talking）
3、Automatically shuts down after 3
minutes without connection
• Place the earbuds into the charging
case properly
• Make sure the charging case is fully
charged
The earbuds reconnected with
previously paired device automatical-
ly:
• Deactivate the Bluetooth function of
previously paired device or clear
“Buds live” from its Bluetooth
device list, and then search again
No sound in one
of the earbuds in
couple earbuds
mode
Can’ t hear the
other party during
a phone call
The other party
can’ t hear your
voice during a
phone call
Touch Control of
the earbuds is
unresponsive
Place both earbuds back to the charging
case then take them out, they will pair
with each other automatically. If pairing
failed, restore them back to the factory
settings as instructed in the “Clear Pairing
List” section
Can’ t find
“Buds live” in the
Bluetooth device
list
Lift the lid and take out the earbuds
and they connect to each other. The
LED indicator on the main ear flashes
alternately red and blue to indicate
that the headset is now paired with
the phone
Operation and Functions
Function
Power on
Operation
Power off
Pairing
Voice Prompt
Power on
Power off
Long press the left ear while playing
music or talking
volume -
Beeps at
minimum volume
Double click on the left ear
previous
song
Toot
Double-click on the right ear
The next
song
Toot
Long press your right ear while playing
music or talking
volume +
Beeps at
maximum volume
/
Troubleshooting
No. Problem Solution
When the music is playing,
Pause music: Click left ear or right ear
Music playing: Click the left or right ear
Double-click the left or right ear
Double-click the left or right ear
Function
Pause/
Play
Operation
Answering
calls
Hang up
the call
Voice Prompt
Three strikes left or right ear
SIRI Toot
Press long for 5 seconds while the
earbuds is off
Clear pairing
information
with the mobile
phone
Toot
Press left or right ear for 2 seconds
Decline a
call
Toot
/
/
/
Cleaning and Maintenance
Note: Do not insert anything into the product.
Note:
Only when you are wearing the earbuds can you hear the voice prompt.
Failed to turn on the
earbuds
Earbuds low battery, please charge them
1
Failed to charge the
earbuds
2
Can’ t charge the
charging case
Make sure the charging cable is intact
and plugged in properly
3
4
Failed to pair the
earbuds with your
device
• Turn on the device and activate its
Bluetooth function before pairing
• Bring the earbuds into pairing mode
as instructed in the “Pairing” section
5
• Wear the earbuds properly and keep
them close to each other.
• Place the connected device close to the
earbuds or remove the obstacles
between them
• Clear the debris on the earbuds
Set the volume to higher level
No. Problem Solution
6
Poor sound quality7
8
Unstable connection
• The effective distance may shorten with
obstacles in the way
• Turn off other Bluetooth devices to
decrease the interference
9
10
Free the built-in microphone of any
covers
11
Place the two earbuds into the charging
case and cover the lid, disconnect the
Bluetooth connection. Uncover the lid to
turn on the earbuds and pair again.
LV08JL
Appox 70h
45mAh
500mAh
3.7V
Appox 1.5h
Appox 4.5h
DC 400mA
Design By Pisen Made In China
Guangdong PISEN Electronics Co., Ltd
Add：No.9, Qinfu 1st street, Jintang Industrial Park,
Henggang Town, Longgang Distrist, Shenzhen, P.R.China
https://en.pisengroup.com
For FAQs and more help
information, please visit：
PisenGroup.com/support
Contact：
[e-mail]
210-170558
Li-ion 00