User Manual

ManualsBrandsPipishell ManualsElectronicsFull Motion TV Monitor Wall Mount Bracket Articulating Arms Swivels Tilts Extension Rotation for Most 13-42 Inch LED LCD Flat Curved Screen TVs & Monitors, Max VESA 200x200mm up to 44lbs by Pipishell

Installation Instruction

V1.0

PISF1

Thank you for choosing our product! We strive to provide the best quality

and services for our customers. Would you kindly share your experience

on Amazon if you are satisﬁed? Should you have any issues, please don't

hesitate to contact us.

Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：supportus@pipishell.net (US/CA/DE/UK/FR/IT/ES/JP/AU)

Summary of content (8 pages)

PAGE 1
Installation Instruction V1.0 PISF1 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisﬁed? Should you have any issues, please don't hesitate to contact us. Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA) (CAN) Email：supportus@pipishell.
PAGE 2
WARNING WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY. READ FOLLOWING WARNINGS BEFORE BEGINNING. If you do not understand the instructions or have any concerns or questions, please contact a qualiﬁed installer. Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware included must be used. lf you require replacement parts, contact customer service at supportus@pipishell.
PAGE 3
Supplied Hardwar Hardware for Attaching Wall Plate to Wall Lag Bolts M6X60 Washers Ø6mm Carriage Bolts M6 x 12 Nuts M6 x2 x2 x4 x4 A1 A2 G H ! Wall Anchor CAUTION! These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs.
PAGE 4
Step 1 Measure VESA Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectangle) and check that these taken measures are within the VESA (*) range for this wall mount. (*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatible with wall mounts.
PAGE 5
Step 2-2 Select TV hardware 3 Bolt and spacer combination: spacers sometimes are needed to combine with bolts for several situations as below: TV back TV back Add distance to wall TV back TV back Irregular back Insert Cables Step 2-3 Attach the TV Bracket for VESA hole pattern: 75 mm X 75 mm 100mm X 100mm B1 D1/E1/F1 G D1/E1/F1 B1 H D2/E2/F2 B1 B2/C for VESA hole pattern: for VESA hole pattern: or 200 mm X 200 mm 200 mm X 100 mm 4
PAGE 6
Step 3A Wall Plate Install (Concrete Wall) CAUTION : Anchor These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. 3A-1 A3 3A-2 Drill 2 pilot holes using a 25/64 in.(10 mm) diameter drill bit. Make sure the depth is not less than 2.75in. (70mm) 01 Position the wall plate at your desired height, level the wall plate and mark the pilot hole locations.
PAGE 7
Step 3B Wall Plate Install (Wood stud) CAUTION : These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. 3B-1 3B-2 01 Position the wall plate at your desired height and lineup the holes with your stud center line. Level the wall plate and mark the holes. Use a stud ﬁnder(not included)to locate wood studs. Mark the edge and center locations. 3B-3 60mm ø3mm Drill 2 pilot holes using a 1/8 in.(3 mm) diameter drill bit. Make sure the depth is not less than 2.36in.
PAGE 8
Step 4 Hang the TV onto the wall plate Take this apart. Mounting your TV to the brackets and lock it. If needed, the TV can be tilted +5/-15 degrees and rotate 360 degrees from left to right.