User Manual
②
①
④
B
A
③
⑤
POP Filter
⑥
Microphone Stand
Instruction Manual
Model: PIMS01
V3.0
Step 1:
For Secure Blue you need to secure the 5/8" male copper mounting screw ② to 3/8" female
threaded screw adapter ①, then you can directly fix your Blue Microphone onto mounting screw.
For normal microphone, you do not need to use the 5/8" male copper mounting screw ②. Just
secure mic clip ③ onto female thread screw adaptor ①. You can directly fix your normal micro-
phone onto mic clip ③.
Note: The hole of some Blue Yeti Mic's mounting is bigger than 5/8" due to its manufacturing
issues. Please wrap thread tape (not included) around the screw to make it big enough to connect.
Step 2:
Put
microphone arm stand ④ into the hole of desk mounting clamp ⑤ .
Step 3:
Tighten the knob [B] to lock
microphone arm stand ④ into desk mounting clamp ⑤.
Step 4:
Adjust lever [A] to make the
desk mounting clamp ⑤ adapt to the desk, shelf, counter, etc with
maximum 2 inch thickness.
Step 5:
Tighten lever [A] to secure
desk mounting clamp ⑤ to the object to be placed.
Packages Included
③
Microphone Arm Stand
Desk Mounting Clamp
Mounting Screw
Mic Clip
5/8"-27 Male to 3/8"-16 Female Threaded Screw Adapter
Mic Sponge
Pop Filter
x 1
x 1
x 1
x 1
x 1
x 1
x 1
④
②
①
⑥
⑦
⑤
⑦
3/8”Thread
5/8”Thread
Mounting Screw
Thank you for choosing this product! We strive to provide you with the best quality
products and services in the industry. Should you have any issues, please don't hesitate
to contact us.
Technical Support:
1-800-556-9829 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@pipishell.net(US/CA)