MAN-CNDV-50MT-EN.book Page 1 Wednesday, May 4, 2005 1:49 PM Q sound.vision.soul Operation Manual ENGLISH DVD Map CNDV-50MT Don't forget to register your product on www.pioneer.co.uk (or www.pioneer-eur.
MAN-CNDV-50MT-EN.book Page 2 Wednesday, May 4, 2005 1:49 PM The screen shown in the example may differ from the actual screen. The actual screen may be changed without notice for performance and function improvements.
MAN-CNDV-50MT-EN.book Page 1 Wednesday, May 4, 2005 1:49 PM Introduction Licence Agreement PIONEER CNDV-50MT THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP. (JAPAN) (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
MAN-CNDV-50MT-EN.book Page 2 Wednesday, May 4, 2005 1:49 PM 3. LIMITATION OF LIABILITY 4.
MAN-CNDV-50MT-EN.book Page 3 Wednesday, May 4, 2005 1:49 PM Terms and conditions in relation to the Tele Atlas navigation data Object and right of use: This agreement relates to the digital map data (the ‘data’) included in the accompanying package. Tele Atlas grants the buyer the right to use the data combined with one (1) car navigation system. The buyer only becomes the owner of the material data carrier and does not acquire the ownership of the data.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 7 Wednesday, May 4, 2005 1:49 PM Important Safety Information Before using your Navigation System, be sure to read and fully understand the following safety information: ❒ Read the entire manual before operating this Navigation System. ❒ The navigation features of this unit (and rear view camera option if purchased) is intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgement, and care when driving.
MAN-CNDV-50MT-EN.book Page 8 Wednesday, May 4, 2005 1:49 PM Notes Before Using the System and Additional Safety Information The Navigation System detects whether your vehicle’s handbrake is engaged or not, and prevents you from watching a DVD or TV on this display while driving. In case of trouble Colour difference of the map display between day and night Should the navigation system fail to operate properly, contact your dealer or nearest authorised Pioneer Service Station.
MAN-CNDV-50MT-EN.book Page 9 Wednesday, May 4, 2005 1:49 PM Features (Characteristics of this software) Touch panel key operation It is possible to operate the navigation function and the Audio function by using touch panel key. Compatible with Memory navi mode Memory navigation functions are provided with the hardware. For details, see page 18, “Memory navi mode”.
MAN-CNDV-50MT-EN.book Page 10 Wednesday, May 4, 2005 1:49 PM Manual Overview This manual provides the important information you need to make full use of your new Navigation System. The beginning sections outline the Navigation System and describe its basic operation. The later sections describe the details of the navigation functions. Chapters 6, 7 and 8 describe how to operate the AV functions.
MAN-CNDV-50MT-EN.book Page 11 Wednesday, May 4, 2005 1:49 PM 7 8 9 Using the AV Source (Pioneer AV Equipments) When Pioneer audio equipment is connected to the navigation unit, that equipment can be operated from the navigation unit. This chapter describes the operation of the audio source that can be used when Pioneer audio equipment is connected. Customising the Audio Source Setting Using the audio source, various settings are available to suit your audio-visual taste.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 13 Wednesday, May 4, 2005 1:49 PM Chapter 1 NAVI/AV Basic Operation Flow from Startup to Termination ❒ Be sure to touch the touch keys with a finger. Touch keys cannot be operated by a pen or similar object. ❒ When the microphone is connected and automatic voice recognition is set, you can operate the Navigation System by voicing “OK” instead of touching the “OK”. • If the program is not installed, see page 107 and install the program. 1 5 Press the NAVI MENU button.
MAN-CNDV-50MT-EN.book Page 14 Wednesday, May 4, 2005 1:49 PM The most frequently used function is the Address Search, in which the address is specified and the destination searched. This section describes how to use the Address Search and the basics of using the Navigation System. Also, the method of playing CDs is used as an example of switching to the audio source. • For safety reasons, you cannot use these basic navigation functions while your vehicle is in motion.
MAN-CNDV-50MT-EN.book Page 15 Wednesday, May 4, 2005 1:49 PM Press the NAVI MENU button to display the main menu. 2 Touch “Address Search”. Selects the method for searching the destination. 5 Input the street name. Touch the letter you wish to input. If the next screen is not automatically displayed even though the street name is entered, try touching “OK”. NAVI/AV 1 The input text. Touch “Country key”. If the destination is in another country, this changes the country setting.
Basic Operation Chapter 1 NAVI/AV MAN-CNDV-50MT-EN.book Page 16 Wednesday, May 4, 2005 1:49 PM Searching your destination after specifying the name of city or area You can narrow down the searching candidates by initially specifying the name of city or area where your destination is located. Inputting the name of the city or area then selecting the destination city or area from the list returns you to the Street Name input screen.
MAN-CNDV-50MT-EN.book Page 17 Wednesday, May 4, 2005 1:49 PM 10Route calculation starts automatically. ❒ Touching the information again. ➲ Traffic jam information ➞ Page 47 How to view Map Mode screen This section describes only the items that are displayed on the Map Mode screen. ➲ Details of the map screen ➞ Page 22 Basic Operation voice information.
NAVI/AV MAN-CNDV-50MT-EN.book Page 18 Wednesday, May 4, 2005 1:49 PM Memory navi mode How to listen to a CD While the map disc is inserted, you can store the data on the map disc into the memory of the navigation unit. If the map disc is removed from the navigation unit after the data is stored, navigation is performed using the data in the memory (memory navi mode). In the memory navi mode, you can play a music CD or DVD-Video on the navigation unit while navigation is taking place.
MAN-CNDV-50MT-EN.book Page 19 Wednesday, May 4, 2005 1:49 PM 3 Information of track being played The audio CD set in the navigation unit is played. ❒ DISC AUTO is off in the default setting. ➲ DISC AUTO ➞ Page 96 You can also skip backward or forward to another track by moving the joystick left or right. You can also operate with 7 or 9 of the touch keys. NAVI/AV Touch “YES”. 4 7 To perform fast forward or reverse, touch ➞ then keep touching 1 or 3.
MAN-CNDV-50MT-EN.book Page 20 Wednesday, May 4, 2005 1:49 PM NAVI/AV Buttons you can use The status of the buttons appearing on the screen is indicated by their colour. Depending on the function the navigation is performing, you can touch some buttons, while other buttons are not available. Basic Operation Chapter 1 Blue touch key: The button is operable. Dark grey touch key: The function is not available (e.g., operation is prohibited while driving).
MAN-CNDV-50MT-EN.book Page 21 Wednesday, May 4, 2005 1:49 PM Chapter 2 NAVI Menu and Map Display This section describes the basic operations, including how to display the main menu and how to use the shortcut menu and the map screen. ➲ Other search methods ➞ Page 29 to 32 Traffic/Info menu How to Use Menu Screens The basic operation of the navigation is performed by using menus. There are two types of menu: the “Main menu” and the “Shortcut menu”.
MAN-CNDV-50MT-EN.book Page 22 Wednesday, May 4, 2005 1:49 PM NAVI Shortcut menu Shortcuts allow you to perform various tasks, such as route calculation for the location indicated by the scroll cursor, or registering a location in the Address Book, faster than using the Main menu. ❒ The shortcuts displayed onscreen can be changed. The shortcuts described here are those that can be selected with the system as default setting.
MAN-CNDV-50MT-EN.book Page 23 Wednesday, May 4, 2005 1:49 PM 1 Driver’s View The map from the driver’s viewpoint is shown. (1) 2 Press the POS button again. 3 Touch the mode name or press the POS button to select the mode you want to display. (11) NAVI Press the POS button to display a map of the area around your current position.
MAN-CNDV-50MT-EN.book Page 24 Wednesday, May 4, 2005 1:49 PM NAVI Vehicle Dynamics Display ❒ Rear View can be displayed at all times (e.g. when monitoring an attached trailer, etc.) as a split screen where map information is partially displayed. Please beware that in this setting, camera image is not resized to fit to screen, and that a portion of what is seen by the camera is not viewable. Indicates the status of your vehicle.
MAN-CNDV-50MT-EN.book Page 25 Wednesday, May 4, 2005 1:49 PM City Map (1) (11) (8) (2) (7) (4) (12) (9) (5) (3) (6) ❒ Detailed city map is not displayed during the memory navi mode. Display items Destination* The chequered flag indicates your destination. (1) Name of the next street to be used* (2) Distance to the guidance point* Touch to access the next information. (3) Current location The current location of your vehicle.
NAVI MAN-CNDV-50MT-EN.book Page 26 Wednesday, May 4, 2005 1:49 PM (14) Map of your surroundings (Side map) Touching on the map briefly shows the shortcut menu, while touching longer changes the map to Scroll mode. ➲ Moving the map to the location you want to see ➞ Page 26 (15) Distance to an intersection* Displayed on the enlarged intersection map. The green bar gets shorter as your vehicle approaches an intersection. (16) Next direction of travel* When you approach an intersection, it appears green.
MAN-CNDV-50MT-EN.book Page 27 Wednesday, May 4, 2005 1:49 PM (1) (2) (3) Scroll the map and move the scroll cursor to the icon you want to view. 2 Touch . NAVI 1 (5) (4) (1) Scroll location The position of scroll cursor shows the location selected on the current map. Information for a specified location appears. The information shown varies according to the location. (There may be no information for that location.
NAVI MAN-CNDV-50MT-EN.book Page 28 Wednesday, May 4, 2005 1:49 PM When the the list appears on the right of You can also set a destination by touching the to the right of the list. Touch “OK” to confirm. The location pointed by the scroll cursor will be set as a destination. Scroll: The map display changes to the map the Shortcut menu. If you touch anywhere on the map, the map display changes to Scroll mode.
MAN-CNDV-50MT-EN.book Page 29 Wednesday, May 4, 2005 1:49 PM Chapter 3 NAVI Setting a Route to Your Destination • For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the handbrake before setting your route. ❒ Some information on traffic regulations by days or time depends on the time when the route calculation is performed.
Setting a Route to Your Destination Chapter 3 NAVI MAN-CNDV-50MT-EN.book Page 30 Wednesday, May 4, 2005 1:49 PM 5 Touch the subcategory. 6 Input the name of the POI. If the list does not automatically appear when the name of the POI has been entered, try touching “OK”. “City”: First, touch to specify the destination city or area. ❒ If less than six POIs in a subcategory are registered, the screen for inputting the POI name is not displayed. Please proceed to Step 7.
MAN-CNDV-50MT-EN.book Page 31 Wednesday, May 4, 2005 1:49 PM ❒ When some sub-categories are selected, the corresponding category is marked blue. When all the sub-categories within a category are selected, that category is marked red. Setting an Entrance or Exit of a Motorway as Your Destination You can set the entrance or exit of a motorway as your destination. Touch “Destination” in the Main menu, and then touch “Motorway Search”. The display for entering the name of the motorway appears.
NAVI MAN-CNDV-50MT-EN.book Page 32 Wednesday, May 4, 2005 1:49 PM Finding Your Destination by Specifying the Post Code If you know the post code of your destination, you can use it to find your destination. 1 Touch “Destination” in the Main menu, then touch “Postal Code Search”. The post code input screen appears. 2 Touch the country key of the destination country and touch “OK”. Setting a Route to Your Destination Chapter 3 3 4 Input the post code.
MAN-CNDV-50MT-EN.book Page 33 Wednesday, May 4, 2005 1:49 PM You can change the route calculation conditions using the Route Options menu. The following description features an example of changing the number of the route to be searched. 1 Touch “Route Options” in the Main menu. The Route Options menu appears. 2 Touch “Route No.”. The content currently set appears under the name of the item. Each time you touch the item, the setting changes.
MAN-CNDV-50MT-EN.book Page 34 Wednesday, May 4, 2005 1:49 PM NAVI Avoid Toll Road Displaying impracticability of fulfilling the conditions by icon. • Pass through Area to Avoid • Use toll road against the setting “Avoid Toll Road” is “On”. • Use Ferry against the setting “Avoid Ferry” is “On”. (2) Distance to your destination (3) Travel time to your destination ❒ The “Avoid Motorway” setting may not be reflected, depending on the distance to the destination.
MAN-CNDV-50MT-EN.book Page 35 Wednesday, May 4, 2005 1:49 PM Checking the Set Route NAVI You can check information about the route between your current location and your destination. You can select two methods: checking the passing streets with a list; and checking the shape of the route by scrolling the map along the route. Scroll Cursor Current Route Checking the set route with the map You can select the following items: Map: The scroll screen is displayed.
MAN-CNDV-50MT-EN.book Page 36 Wednesday, May 4, 2005 1:49 PM NAVI ❒ When a long distance route is calculated, your Navigation System may not be able to list all the roads. (In this case, the remaining roads will be shown in the list as you drive on.) 3 Touch “Reroute” or the distance from the list. Checking the set route from the Route Options menu You can also check the information about the set route from the Route Options menu.
MAN-CNDV-50MT-EN.book Page 37 Wednesday, May 4, 2005 1:49 PM Adding Way Points to the Current Route NAVI Add: Switch the display to search for points. When you display the map of a certain point after searching for it, you can touch “OK” to add that point to the way points. (You can add up to five way points in total.) Delete: You can delete way points from the list. Sort: Touch to display a screen listing the way points.
MAN-CNDV-50MT-EN.book Page 38 Wednesday, May 4, 2005 1:49 PM NAVI 3 4 Touch “Skip Way Point”. A message asking whether you want to skip the next way point appears. Touch “Yes”. A new route to your destination through all the remaining way points, except for the skipped way point, is calculated. Deleting a way point from the route If you no longer need to pass through a way point you have not yet reached, you can delete that place from the list of way points and calculate a new route.
MAN-CNDV-50MT-EN.book Page 39 Wednesday, May 4, 2005 1:49 PM 6 NAVI When registering another icon, repeat steps 3 through 5. Touch “Back” The registered shortcut is displayed. ❒ You can register a POI shortcut by touching “Overlay POI” under “Traffic/Info” in the main menu, or by touching the icons such as and in the shortcut menu. The registering steps are the same as described above. Deleting a POI shortcut Touch “Destination” in the Main menu, and then touch “Vicinity Search”. 2 Touch “Set”.
Setting a Route to Your Destination Chapter 3 NAVI MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 41 Wednesday, May 4, 2005 1:49 PM Chapter 4 NAVI Editing the Navigation Utilities • For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the handbrake before setting your route. 1 Touch “Setting” in the Main menu, then touch “Defined Locations”. 2 Touch “Set ”Go To””. When registering your home location, touch “Return Home”.
Registering a previous location in the Address Book Once a destination or way point is searched, it is automatically retained and stored in the Destination History. If a search is cancelled while still in progress, only the places where the map was displayed and scrolled through or places where the short-cut menu was displayed are retained and stored. Note that after 100 places are stored, new places are automatically overwritten on top of old ones, in oldest to most recent order.
MAN-CNDV-50MT-EN.book Page 43 Wednesday, May 4, 2005 1:49 PM (1) Name The name can be used as a command for voice operation. (2) Name (2nd line) The name of the city appears in this column. (Not editable) (3) Phone number (4) Pictograph The symbol displayed on the map. (5) Sound The selected operating sound is played. (6) Modify Location You can change the registered location by scrolling the map. NAVI The details you set are registered, and the Address Book menu appears.
NAVI MAN-CNDV-50MT-EN.book Page 44 Wednesday, May 4, 2005 1:49 PM Deleting Address Book or Destination History information Items registered in the Address Book or Destination History can be deleted. All entries of the data in the Address Book or Destination History can be deleted at once. 1 Touch “Destination” in the Main menu, then touch “Address Book”. To delete items in the Destination History, touch “Destination History”. 2 Touch on the right-hand side of the place you want to delete.
MAN-CNDV-50MT-EN.book Page 45 Wednesday, May 4, 2005 1:49 PM 6 5 Scroll the map, adjust the position of the red frame, and touch “OK”. NAVI Alternative option: Select All: All the locations are selected (or cancelled) at once. Touch “OK”. The data of the selected locations is stored in the Address Book. Setting Areas to Avoid If you register Areas to Avoid, such as crowded intersections or congested areas, routes can be calculated that avoid those areas.
MAN-CNDV-50MT-EN.book Page 46 Wednesday, May 4, 2005 1:49 PM NAVI Using Traffic Information (1) You can check traffic information transmitted by the FM radio service through the Radio Data System (RDS-TMC) on the display. Such traffic information is updated periodically. When you receive traffic information, the Navigation System automatically displays an icon informing you of the traffic information. You can also select whether to recalculate the route to avoid a traffic jam.
MAN-CNDV-50MT-EN.book Page 47 Wednesday, May 4, 2005 1:49 PM 4 Checking traffic information on the route 1 Touch “Traffic/Info” in the Main menu, and then touch “Traffic On Route”. The currently set traffic information on the route appears on the screen. ❒ The method for checking the content displayed on the screen is the same for “Checking all traffic information”.
NAVI MAN-CNDV-50MT-EN.book Page 48 Wednesday, May 4, 2005 1:49 PM When checking traffic jam information manually Touching on the screen allows you to check for traffic jam information on your route. If there is any information about a traffic jam on your route, a message appears asking you whether to search for another route to avoid the traffic jam. If there is no traffic jam information along the route being guided, it is announced on screen and by voice.
MAN-CNDV-50MT-EN.book Page 49 Wednesday, May 4, 2005 1:49 PM Selecting the radio station Touch “Traffic/Info” in the Main menu, then touch “Manual Station Search”. The list of registered RDS-TMC stations appears. This list of broadcasting stations (Preset Station) cannot be used unless those broadcasting stations have been stored. 2 Select a radio station on the list.
NAVI MAN-CNDV-50MT-EN.book Page 50 Wednesday, May 4, 2005 1:49 PM Back to Original: The picture when purchased is selected. ❒ When a CD-R (or CD-RW) is inserted, you cannot select “Back to Original”. When the Pioneer DVD map disc is inserted, you cannot select “Import from Disc”. ❒ In step 5, touching other than “Import from Disc” allows you to select a background image stored on the Pioneer DVD map disc.
MAN-CNDV-50MT-EN.book Page 51 Wednesday, May 4, 2005 1:49 PM Checking the Navigation Status The navigation status, including the driving status of a vehicle, positioning status by satellite, learning status of the 3D sensor, and cable connection status can be checked. NAVI ❒ When the Navigation System is reset, or the language setting is changed, the background picture may change back to the original picture.
NAVI MAN-CNDV-50MT-EN.book Page 52 Wednesday, May 4, 2005 1:49 PM If installed correctly, “OK” appears. Indicates whether the Installation position of the navigation unit is correct or not. When the navigation unit is installed with an extreme angle exceeding the limitation of the installing angle, “Incorrect angle” will be displayed. When the angle of the navigation unit has been changed, “Excessive vibration” will be displayed. (4) Hand brake When the handbrake is applied, “On” is displayed.
MAN-CNDV-50MT-EN.book Page 53 Wednesday, May 4, 2005 1:49 PM 3 Touch the items you want to display. NAVI Chapter 4 You can select the following items. • Voltage: Displays the power supply and voltage supplied from the battery to this system. • Acceleration: Acceleration in a forward direction is displayed. The + sign indicates acceleration while the – sign indicates deceleration. • Side Acceleration: Acceleration in a side direction such as when turning, is displayed.
Editing the Navigation Utilities Chapter 4 NAVI MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 55 Wednesday, May 4, 2005 1:49 PM Chapter 5 NAVI Customising Your Navigation System • For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the handbrake before setting your route. 1 Touch “Settings” in the Main menu. The Settings menu appears. 2 Touch “System Options”. The screen changes.
NAVI MAN-CNDV-50MT-EN.book Page 56 Wednesday, May 4, 2005 1:49 PM • Voice Recognition This setting controls whether the volume of the Audio source is automatically muted during voice operation. On*: During voice operation, the volume of the Audio source is muted automatically. Off: The volume of the Audio source stays the same during voice operation. Customising Your Navigation System Chapter 5 ❒ If you select “Off”, the sound from the Audio source may interfere with the voice recognition system.
MAN-CNDV-50MT-EN.book Page 57 Wednesday, May 4, 2005 1:49 PM Background Picture Setting ➲ The background picture can be changed ➞ Page 49 Read From Disc ➲ Read From Disc ➞ Page 44 Short-Cut Selection Select shortcuts to display on the map screen. In the list displayed onscreen, the items with red ticks are displayed on the map screen. Touch the shortcut you wish to display and then touch “Done” when a red tick appears. You can select up to three shortcuts.
NAVI MAN-CNDV-50MT-EN.book Page 58 Wednesday, May 4, 2005 1:49 PM This Trip: Display tracking dots but erase them when the navigation system is turned off (when turning off the engine of your vehicle). Off*: Do not display tracking dots. Defined Locations Touch “Defined Locations” in the Setting Menu to display.
MAN-CNDV-50MT-EN.book Page 59 Wednesday, May 4, 2005 1:49 PM 3D Calibration Status This is a demonstration function for shops. After a route is set, the simulation of the route guidance to a destination is automatically displayed. Normally, set this to “Off”. On (Repeat): Repeat demo drive. Off*: Demo Mode is set off. ➲ 3D Calibration Status ➞ Page 51 ❒ If you eject the map disc during the demo drive, the demo mode will be stopped.
Customising Your Navigation System Chapter 5 NAVI MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 61 Wednesday, May 4, 2005 1:49 PM Chapter 6 AV Using the AV Source (Built-in DVD drive and Radio) You can play a DVD-Video, CD, MP3 disc or use the radio with the navigation unit. This chapter describes how to use the audio source and the basic operation of the audio source. To go to the next group of touch panel keys, touch ➞.
MAN-CNDV-50MT-EN.book Page 62 Wednesday, May 4, 2005 1:49 PM AV 5 Touch “AUDIO”, “FUNCTION” or “SETUP” to enter the menu you want to operate. Each menu is displayed. The items that cannot be operated according to the sources or conditions are indicated in grey. FUNCTION menu (3) Basic Operation (2) Chapter 6 (1) Using the AV Source (Built-in DVD drive and Radio) AUDIO menu SETUP menu (4) (5) (1) FUNCTION key Touch to enter the FUNCTION menu for each source.
MAN-CNDV-50MT-EN.book Page 63 Wednesday, May 4, 2005 1:49 PM ➲ More advanced DVD-Video operation ➞ Page 67 You can play a DVD-Video, CD or MP3 disc using the built-in DVD drive of the navigation unit. This section describes common operations for these media. ❒ Pressing the DISP button changes the screen display. (2) (3) (7) ➲ Switching screen display ➞ Page 98 (1) Source icon Shows which source has been selected.
AV MAN-CNDV-50MT-EN.book Page 64 Wednesday, May 4, 2005 1:49 PM ❒ There is sometimes a delay between starting up playback and the sound being issued. This is particularly the case when playing back multi-session and many folders. When being read in, Reading Format is displayed. Using the AV Source (Built-in DVD drive and Radio) Chapter 6 Built-in DVD drive source ❒ Playback is carried out in order of file number. Folders are skipped if they contain no files.
MAN-CNDV-50MT-EN.book Page 65 Wednesday, May 4, 2005 1:49 PM (5) Using to stop playback • DVD: When you stop DVD playback by touching (, that location on the disc is memorised enabling playback from that point when you play the disc again. • CD, MP3:When you stop CD playback by touching (, that track number on the disc is memorised enabling playback from that track when you play the disc again. ❒ To play the disc again, touch ;.
MAN-CNDV-50MT-EN.book Page 66 Wednesday, May 4, 2005 1:49 PM Using the AV Source (Built-in DVD drive and Radio) Chapter 6 Built-in DVD drive source AV Touch 0 – 9 to input the desired number. • To select 3, touch 3. • To select 10, touch 1 and 0 in order. • To select 23, touch 2 and 3 in order. To cancel the input numbers, touch “CLEAR”. While the input number is displayed, touch “ENTER”. This starts playback from the selected track.
MAN-CNDV-50MT-EN.book Page 67 Wednesday, May 4, 2005 1:49 PM (2) Playing tracks in a random order Touching “RANDOM” switches between “ON” and “OFF”. In the case of MP3, the selected tracks in the repeated range are randomly played. 1 Touch the screen to display to touch panel keys. 2 Touch ➞ to display 3 Touch to display touch panel keys to operate the DVD menu. 4 Touch 8, 2, 4 or 6 to select the desired menu item. 5 Touch “ENTER”. Playback starts from the selected menu item.
MAN-CNDV-50MT-EN.book Page 68 Wednesday, May 4, 2005 1:49 PM AV ❒ With some discs, images may be unclear during slow motion playback. ❒ Reverse slow motion playback is not possible. You can use the search function to search for a desired scene by specifying a title or chapter, and the time search function to specify the time on a disc at which play starts. • Chapter search and time search are not possible when disc playback has been stopped.
MAN-CNDV-50MT-EN.book Page 69 Wednesday, May 4, 2005 1:49 PM Radio With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can switch among viewing angles during playback. • During playback of a scene shot from multiple angles, the angle icon is displayed. Turn angle icon display on or off using DVD SETUP menu.
AV MAN-CNDV-50MT-EN.book Page 70 Wednesday, May 4, 2005 1:49 PM (6) LOCAL indicator Shows when local seek tuning is on. Advanced radio operation 1 Touch the source icon and then touch “RADIO” to select the radio. 2 Touch the screen to display the touch panel keys. 3 Touch “BAND” to select a band. Touch “BAND” repeatedly until the desired band is displayed, FM1, FM2, FM3 for FM or MW/LW.
MAN-CNDV-50MT-EN.book Page 71 Wednesday, May 4, 2005 1:49 PM RDS AV ❒ You can also use 8 and 2 to recall radio station assigned to preset tuning keys P1 – P6. RDS operation Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 2 Touch “ON” to turn local seek tuning on. To turn local seek tuning off, touch “LOCAL”. 3 Touch 4 or 6 to set the sensitivity.
MAN-CNDV-50MT-EN.book Page 72 Wednesday, May 4, 2005 1:49 PM AV Switching the RDS display When you tune in an RDS station its program service name is displayed. If you want to know the frequency you can.
MAN-CNDV-50MT-EN.book Page 73 Wednesday, May 4, 2005 1:49 PM 2 appears in the display. The tuner will standby for traffic announcements. If you turned TA function on while tuned in to neither a TP nor an enhanced other network’s TP station, the indicator lights. To turn traffic announcements standby off, press TA/NEWS button again. 3 4 Use VOLUME to adjust the TA volume when a traffic announcement begins. The newly set volume is stored in memory and recalled for subsequent traffic announcements.
MAN-CNDV-50MT-EN.book Page 74 Wednesday, May 4, 2005 1:49 PM AV ❒ You can also turn on or off news program in the FUNCTION menu. Touching “NEWS” switches between “ON” and “OFF”. Using the AV Source (Built-in DVD drive and Radio) Chapter 6 RDS Receiving PTY alarm broadcasts PTY alarm is a special PTY code for announcements regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, ALARM appears on the display and the volume adjusts to the TA volume.
MAN-CNDV-50MT-EN.book Page 75 Wednesday, May 4, 2005 1:49 PM PTY list Specific Type of program News Current affairs General information and advice Sports Weather reports/meteorological information Stock market reports, commerce, trading, etc.
Using the AV Source (Built-in DVD drive and Radio) Chapter 6 RDS AV MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 77 Wednesday, May 4, 2005 1:49 PM Chapter 7 AV Using the AV Source (Pioneer AV Equipments) When Pioneer audio equipment is connected to the navigation system using IP-BUS or AV-BUS, such equipment can be operated from the navigation unit. This chapter describes the operation of the audio source that can be used when the Pioneer audio equipment is connected.
AV MAN-CNDV-50MT-EN.book Page 78 Wednesday, May 4, 2005 1:49 PM Advanced multi-CD player operation Tracks will play in a random order within the previously selected M-CD or DISC ranges. Scanning CDs and tracks When the repeat play range is set to DISC, the beginning of each track on the selected disc plays for about 10 seconds. When the repeat play range is set to M-CD, the beginning of the first track of each disc is played for about 10 seconds. (1) (1) Function display Shows the function names.
MAN-CNDV-50MT-EN.book Page 79 Wednesday, May 4, 2005 1:49 PM You can use ITS to enter and playback up to 99 tracks per disc, for up to 100 discs (with the disc title). (With multi-CD players sold before the CDXP1250 and CDX-P650, up to 24 tracks can be stored in the playlist.) Erasing a track from your ITS playlist When you want to delete a track from your ITS playlist, you can if ITS play is on. If ITS play is already on, skip to step 2.
MAN-CNDV-50MT-EN.book Page 80 Wednesday, May 4, 2005 1:49 PM AV Displaying titles on CD TEXT discs DAB Tuner ➲ Switching screen display ➞ Page 98 Selecting tracks from the track title list Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to playback. 1 Touch “TRACK LIST” in the FUNCTION menu. 2 Touch or of titles. 3 Touch the track title in the list. That selection will begin to play.
MAN-CNDV-50MT-EN.book Page 81 Wednesday, May 4, 2005 1:49 PM (5) AS (Announcement support) icon 5 (6) TEXT indicator Shows that the currently received service has a dynamic label. (7) Preset list display Shows the preset list. To select an ensemble, keep touching 4 or 6 for about one second and release. You can cancel ensemble search by touching either 4 or 6 briefly. You can also perform ensemble search by holding the joystick left or right.
AV MAN-CNDV-50MT-EN.book Page 82 Wednesday, May 4, 2005 1:49 PM Setting the announcement support interruption Searching for service by available PTY information 1 Touch “AS” in the FUNCTION menu. 2 Touch “ANNOUNCE” or “WEATHER” to turn the selected announcement support interruption on. Touching “ANNOUNCE” or “WEATHER” switches between “ON” and “OFF”. Available PTY search lets you see the list of available PTYs in the current ensemble and select one of them to receive.
MAN-CNDV-50MT-EN.book Page 83 Wednesday, May 4, 2005 1:49 PM Storing and recalling dynamic label 1 Press DISP button and hold to display dynamic label. (2) Band indicator Shows which band the TV tuner is tuned to. AV You can store data from up to six dynamic label transmissions at touch keys 1 – 6. (3) Preset number indicator Shows which preset has been selected. (4) Channel indicator Shows which channel the TV tuner is tuned. (5) Preset list display Shows the preset list.
AV MAN-CNDV-50MT-EN.book Page 84 Wednesday, May 4, 2005 1:49 PM ➲ How to display the FUNCTION menu ➞ Page 61 Storing and recalling broadcast stations If you touch any of the preset tuning keys P1 – P12 you can easily store up to 12 broadcast stations for later recall with the touch of a key. Using the AV Source (Pioneer AV Equipments) Chapter 7 S-DVD 1 When you find a station that you want to store in memory keep touching a preset tuning key P1 – P12 until the preset number (e.g., P.
MAN-CNDV-50MT-EN.book Page 85 Wednesday, May 4, 2005 1:49 PM 1 Touch the screen to display the touch panel keys. 3 To skip back or forward to another chapter/track, touch 4 or 6 briefly. You can also skip back or forward to another chapter/track by moving the joystick left or right. 4 To perform fast forward or reverse, keep touching 4 or 6 for about one second and release. You can also perform fast reverse/fast forward by holding the joystick left or right.
MAN-CNDV-50MT-EN.book Page 86 Wednesday, May 4, 2005 1:49 PM AV 2 When you find the desired track touch “SCAN” to turn scan play off. (2) External unit indicator Displays any connected external units. 1 Touch the source icon and then touch “EXT-1” or “EXT-2” to select the external unit. 2 ❒ This function differs slightly from ITS playback with a multi-CD player. With multi-DVD player, ITS playback applies only to the CD playing. Touch the screen to display the touch panel keys.
MAN-CNDV-50MT-EN.book Page 87 Wednesday, May 4, 2005 1:49 PM AV Operate the external unit by using FUNCTION 1 FUNCTION 4 The external unit can be operated by transmitting the operating commands set to FUNCTION 1 FUNCTION 4. ❒ The operating commands set to FUNCTION 1 - FUNCTION 4 vary depending on the external unit. ❒ Some functions may not be operated until you touch and hold the key. 1 Touch “FUNCTION 1” - “FUNCTION 4” in the FUNCTION menu. 2 Touch “SEND”.
Using the AV Source (Pioneer AV Equipments) Chapter 7 EXT AV MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 89 Wednesday, May 4, 2005 1:49 PM Chapter 8 AV Customising the Audio Source Setting Various settings according to your audiovisual requests are available with the audio source. This chapter describes the methods of changing the various settings and how to set of the LCD panel. Audio Adjustments Introduction of audio adjustments Recalling equaliser curves There are six stored equaliser curves which you can easily recall at any time.
MAN-CNDV-50MT-EN.book Page 90 Wednesday, May 4, 2005 1:49 PM AV 2 Customising the Audio Source Setting Chapter 8 Audio Adjustments 3 Touch 8 or 2 to adjust front/rear speaker balance. Each time you touch 8 or 2 moves the front/ rear speaker balance towards the front or the rear. FRONT:15 – REAR:15 is displayed as the front/rear speaker balance moves from front to rear. FR:00 is the proper setting when only two speakers are used. When the rear output setting is REAR SP SUB.
MAN-CNDV-50MT-EN.book Page 91 Wednesday, May 4, 2005 1:49 PM Using non fading output Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. When the non fading output setting is on, the audio signal does not pass through navigation unit’s low pass filter (for the subwoofer), but is output through the RCA output. 1 Touch “LOUDNESS” in the AUDIO menu. 2 Touch “ON” to turn loudness on. To turn loudness off, touch “OFF”. 3 Touch 4 or 6 to select a desired level.
MAN-CNDV-50MT-EN.book Page 92 Wednesday, May 4, 2005 1:49 PM Customising the Audio Source Setting Chapter 8 Setting Up the DVD Player AV Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. • Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Touch “SLA” in the AUDIO menu.
MAN-CNDV-50MT-EN.book Page 93 Wednesday, May 4, 2005 1:49 PM 2 • If you select the TV aspect, navigation unit’s display changes to the same setting. 1 Assist subtitles offer explanations for the aurally impaired. However, they are only displayed if they are recorded on the DVD. You can turn assist subtitles on or off as desired. Touch “SET UP” and then touch “TV ASPECT”.
MAN-CNDV-50MT-EN.book Page 94 Wednesday, May 4, 2005 1:49 PM Chapter 8 Initial Settings AV 4 Touch any of 1 – 8 to select the desired level. The parental lock level is set. • LEVEL 8 – Playback of the entire disc is possible (initial setting) • LEVEL 7 – LEVEL 2 – Playback of discs for children and non-adult oriented discs is possible • LEVEL 1 – Playback of discs for children only is possible ❒ If you want to change the parental level, enter the registered code number in the Step 2.
MAN-CNDV-50MT-EN.book Page 95 Wednesday, May 4, 2005 1:49 PM Touch “REAR SP” in the INITIAL menu. The unit can automatically search for a different station with the same programming, even during preset recall. 2 Touch “REAR SP” to switch the rear output setting. When no subwoofer is connected to the rear output, select FULL. When a subwoofer is connected to the rear output, select SUB. W. ❒ When the rear output setting is SUB. W, you cannot change the subwoofer controller.
MAN-CNDV-50MT-EN.book Page 96 Wednesday, May 4, 2005 1:49 PM AV ❒ Operation returns to normal when the phone connection or the voice guidance is ended. ❒ Even when you receive a phone call, navigation voice guidance cannot be attenuated or muted. Use the Hardware Volume to control the navigation voice guidance volume.
MAN-CNDV-50MT-EN.book Page 97 Wednesday, May 4, 2005 1:49 PM • Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. • Confirm the setting immediately whether the display changes to a rear view camera image when the gearstick is moved to REVERSE (R) from another position. • When the whole screen changes to a rear view camera image during normal driving, switch to another setting.
AV MAN-CNDV-50MT-EN.book Page 98 Wednesday, May 4, 2005 1:49 PM Setting the automatic open function When you do not wish the display to open/close automatically, you can set the automatic open function to the manual mode. Customising the Audio Source Setting Chapter 8 Switching the Screen Using the DISP Button 1 Touch “AUTO FLAP” in the SETUP menu.
MAN-CNDV-50MT-EN.book Page 99 Wednesday, May 4, 2005 1:49 PM M-CD (CD TEXT disc) P. CH DIRECT (preset station list) – PS (program service name) – PTY (PTY information) Disc List – Disc Title* – Disc Artist* – Track Title* – Track Artist* ❒ If a PTY code of zero is received from a station or the signal is too weak for this unit to pick up the PTY code, you cannot switch to PTY information display. In this case, if you have selected the PTY information display, the display will change to a blank screen.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 101 Wednesday, May 4, 2005 1:49 PM Chapter 9 NAVI/AV Operating Your Navigation System with Voice To Ensure Safe Driving 2 Speak a command into the microphone. 3 When the command is recognised, it is repeated. 4 As necessary, repeat Steps 2 and 3. 5 The voice command is carried out. Basics of Voice Operation Your Pioneer Navigation System comes with the latest in voice recognition technology. You can use voice commands to operate many of its functions.
MAN-CNDV-50MT-EN.book Page 102 Wednesday, May 4, 2005 1:49 PM NAVI/AV ❒ Depending on the operating state of the navigation system, some commands displayed in Voice Help may be unavailable. Voice Help Current page VOICE icon When voice command is possible Operating Your Navigation System with Voice Chapter 9 When voice command is not accepted ❒ If no voice icon is displayed, check to see whether the microphone is properly connected and turn the power on again.
MAN-CNDV-50MT-EN.book Page 103 Wednesday, May 4, 2005 1:49 PM Operating the route being guided Changing map display Street Map, City Map, Region Map, Driver’s View, Map Mode, Street List Mode, Mixed Mode, Rear View, Vehicle Dynamics, Overlay Points Of Interest*, Cancel Overlay POI* An Example of Voice Operation In this example, you want to search for the nearest petrol station. When presented with a list of search options, you say the number to the left of the option you want to select.
MAN-CNDV-50MT-EN.book Page 104 Wednesday, May 4, 2005 1:49 PM Operating Your Navigation System with Voice Chapter 9 NAVI/AV 4 Say “Petrol Station”. Displays the name of a major petrol station group. 5 Say “All Categories”. The map of the nearest petrol station is shown. The message, “Do you want to stop in?” follows. 6 After confirming the location, say “Yes”. To spell out characters and symbols When entering street names, city names, names of POIs, or post codes, speak one character at a time.
MAN-CNDV-50MT-EN.book Page 105 Wednesday, May 4, 2005 1:49 PM To finish entry of the spelt-out name of a city, street, POI, or post code, say “Verify”. A list of relevant items is displayed. Tips for Voice Operation For your voice commands to be correctly recognised and interpreted, ensure that conditions are suitable for recognition.
Operating Your Navigation System with Voice Chapter 9 NAVI/AV MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 107 Wednesday, May 4, 2005 1:49 PM NAVI/AV Appendix Installing the Program The program is installed to the Navigation System using the application disc. This is not necessary if your dealer already performed the installation. When installing the program, you carry out the following operations. When all the setup procedures are completed, you can use the Navigation System. Insert the disc while the vehicle is parked. 2 Select the language used for the Navigation System.
NAVI/AV MAN-CNDV-50MT-EN.book Page 108 Wednesday, May 4, 2005 1:49 PM When the installation is complete, the opening display appears. 10To complete the setting, touch “Back”. Appendix The map of your surroundings appears. 6 Press the NAVI/AV button to change the navigation screen. Some time is needed until navigation is ready. 7 Check the details of the cautionary message and touch “OK”. 8 To set the time difference, touch “+” or “–”.
MAN-CNDV-50MT-EN.book Page 109 Wednesday, May 4, 2005 1:49 PM What is auto downloaded memory area? While the map disc is inserted, you can store the data on the map disc into the memory of the navigation unit. If the map disc is removed from the navigation unit after the data is stored, navigation is performed using the data in the memory (memory navi mode). In the memory navi mode, you can play a music CD or DVD-Video on the navigation unit while navigation is taking place.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 111 Wednesday, May 4, 2005 1:49 PM ➲ “Voice commands” ➞ Page 102 Cautions relating to auto reroute in memory navi mode Auto rerouting in memory navi mode is designed to return you to your original route wherever possible. In memory navi mode, persistently deviating from the route may result in one of the following: • A clearly circuitous route • Leaving a toll road and returning to the toll road from where you left it.
NAVI/AV MAN-CNDV-50MT-EN.book Page 112 Wednesday, May 4, 2005 1:49 PM quality is poor, only two dimensions, latitude and longitude, can be obtained and positioning errors are somewhat greater. ❒ The speed pulse data comes from the speed sensing circuit. The location of this speed sensing circuit depends on your vehicle model. In some cases, it is impossible to make a connection to it, and in such a case we recommend that the ND-PG1 speed pulse generator (sold separately) be used.
MAN-CNDV-50MT-EN.book Page 113 Wednesday, May 4, 2005 1:49 PM Map matching Handling Large Errors Positioning errors are kept to a minimum by combining GPS, Dead Reckoning, and map matching. However, in some situations, these functions may not work properly, and the error may become bigger. NAVI/AV As mentioned, the GPS and dead reckoning systems used by this Navigation System are susceptible to certain errors. Their calculations may, on occasion, place you in a location on the map where no road exists.
MAN-CNDV-50MT-EN.book Page 114 Wednesday, May 4, 2005 1:49 PM NAVI/AV Conditions Likely to Cause Noticeable Positioning Errors When driving through a dense forest or tall trees • If a car phone or cellular phone is used near the GPS aerial, GPS reception may be lost temporarily. • Do not cover the GPS aerial with spray paint or car wax, because this may block the reception of GPS signals. Snow buildup can also degrade the signals, so keep the aerial clear.
MAN-CNDV-50MT-EN.book Page 115 Wednesday, May 4, 2005 1:49 PM • If you drive in zig-zags. NAVI/AV • If the road has connected hairpin bends. • If you are on a steep mountain road with many height changes. • If you enter or exit a multi-storey car park or similar with a spiral layout. • If there is a loop or similar road configuration. • If your vehicle is turned on a turntable or similar. Appendix • If you take a ferry. • If your vehicle’s wheels spin, such as on a rough track or in snow.
NAVI/AV MAN-CNDV-50MT-EN.book Page 116 Wednesday, May 4, 2005 1:49 PM • If trees or other obstacles block the GPS signals for a considerable period. • If you drive very slowly, or in a start-and-stop manner, as in a traffic jam. Appendix • If you join the road after driving around a large car park. • When you go round a roundabout. • When starting driving immediately after starting the engine. • If you insert the disc and turn your Navigation System on while driving.
MAN-CNDV-50MT-EN.book Page 117 Wednesday, May 4, 2005 1:49 PM Troubleshooting NAVI/AV If you have problems operating your Navigation System, refer to this section. The most common problems are listed below, along with likely causes and solutions. While this list is not comprehensive, it should answer your most common problems. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer service facility.
MAN-CNDV-50MT-EN.book Page 118 Wednesday, May 4, 2005 1:49 PM NAVI/AV Symptom Cause Your vehicle is operating in Simple hybrid mode. The navigation unit is installed with an extreme angle exceeding the limitation of the installation angle. Indication of the position of your vehicle is misaligned after a U-turn or reversing. The map continually reorients itself. Tracking marks are not displayed. The daylight display is used even when the vehicle lights are on.
MAN-CNDV-50MT-EN.book Page 119 Wednesday, May 4, 2005 1:49 PM Problems in the audio screen (common) Cause The disc is dirty. The loaded disc is a type this unit cannot play. Non compatible video system disc is loaded. The handbrake cord is not connected. The handbrake is not applied. There’s no picture. There’s audio and video skipping. Rear display picture disappears. Nothing is displayed and the touch panel keys cannot use. Change to a disc compatible to your video system.
NAVI/AV MAN-CNDV-50MT-EN.book Page 120 Wednesday, May 4, 2005 1:49 PM Symptom Dialogue language (and subtitle language) cannot be switched. No subtitles are displayed. Playback is not with the audio language and subtitle language settings selected in DVD SETUP. Switching the viewing angle is not possible. Appendix The picture is extremely unclear/ distorted and dark during playback. Cause The DVD playing does not feature multiple language recordings.
MAN-CNDV-50MT-EN.book Page 121 Wednesday, May 4, 2005 1:49 PM This function is not available now. System detected that the vertical angle of the installation has been changed. Learning status for Gyro Sensor has been initialised. System detected that the vertical angle of the installation exceeds the permission level. Please install the navigation unit correctly. When Direction of G sensor is set incorrectly. What to do See the “Installation Manual” and set the direction of the Hide-away unit correctly.
NAVI/AV MAN-CNDV-50MT-EN.book Page 122 Wednesday, May 4, 2005 1:49 PM Message Toll road has not been avoided. There is no applicable data for the selected city. Automatically returning to list. There is no Freeway in this area. If no motorway was found in the selected country. This area does not contain any POI’s of the selected type. Facilities of the selected category do not exist in the surrounding areas. Failed to make the route profile.
MAN-CNDV-50MT-EN.book Page 123 Wednesday, May 4, 2005 1:49 PM There are no files available in /BG/ folder. If the BG folder exists on the PC card but no data in JPEG format exists. If the BG folder exists on the CD-R but no data in JPEG format exists. In the memory navi mode, if the Auto-reroute does not function for some reason. In the memory navi mode, if the map disc is inserted without changing the scale (only when the point is stored on the map disc).
MAN-CNDV-50MT-EN.book Page 124 Wednesday, May 4, 2005 1:49 PM NAVI/AV Error Messages When problems occur with disc playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Centre. The messages in “( )” will appear on the sub-display.
MAN-CNDV-50MT-EN.book Page 125 Wednesday, May 4, 2005 1:49 PM • • • • – when your destination or way points are in the Area to Avoid – when it is not possible to avoid doing so If a suitable route cannot be set in compliance with the specified “Detour” distance, or your preference to avoid motorways, toll roads, ferry route, the setting or parameter may be ignored. When there is a traffic jam ahead, if driving through the traffic jam is better than taking the detour, a detour route may not be set.
NAVI/AV MAN-CNDV-50MT-EN.book Page 126 Wednesday, May 4, 2005 1:49 PM Non routable roads (Pink colour road) Map display is possible, but it cannot be used for the route calculation. Please review and obey all local traffic rules along this route. (For your safety.) Intersection enlargement • When “Close-up of Junction” is on, the map scale increases to show more detail as you approach an intersection.
MAN-CNDV-50MT-EN.book Page 127 Wednesday, May 4, 2005 1:49 PM About folders and MP3 files About the Data for the Map Database • This database was developed and recorded up to April 2004. • It is strictly prohibited to reproduce and use any part or the whole of this map in any form without permission from the copyright owner. • If the local traffic regulation on the site deviates from this data, follow the local traffic regulation signs or indications.
NAVI/AV MAN-CNDV-50MT-EN.book Page 128 Wednesday, May 4, 2005 1:49 PM Copyright Glossary ©1984-2004 Tele Atlas NV. All rights reserved This glossary explains some of the terms used in the manual. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majesty’s Stationery Office. © Crown copyright and/or database right 2004. All rights reserved. Licence number 100026920 the Ordnance Survey Data.
MAN-CNDV-50MT-EN.book Page 129 Wednesday, May 4, 2005 1:49 PM Guidance point Home location Your registered home location. ID3 tag This is a method of embedding track-related information in a MP3 file. This embedded information can include the track title, the artist’s name, the album title, the music genre, the year of production, comments and other data. The contents can be freely edited using software with ID3 Tag editing functions.
NAVI/AV MAN-CNDV-50MT-EN.book Page 130 Wednesday, May 4, 2005 1:49 PM unit’s region number is displayed on the bottom of the display unit. RDS-TMC A communication system for informing drivers of the latest traffic information using FM multiplex broadcast. Information such as traffic jams or accidents can be checked on the display. Route setting The process of determining the ideal route to a specific location; route setting is done automatically by the system when you specify a destination.
MAN-CNDV-50MT-EN.book Page 131 Wednesday, May 4, 2005 1:49 PM Display Information NAVI/AV Main menu Route Options Destination Address Search P. 14 Edit Current Route P. 38 Return Home P. 32, 41 View Current Route P. 36 Go to P. 32, 41 Recalculate P. 33 POI Search P. 29 Route No. P. 33 Vicinity Search P. 30 Route Condition P. 33 Address Book P. 32, 42 Avoid Motorway P. 33 Destination History P. 32, 42 Avoid Ferry P. 33 Motorway Search P. 31 Avoid Toll Road P.
MAN-CNDV-50MT-EN.book Page 132 Wednesday, May 4, 2005 1:49 PM NAVI/AV Settings Volume P. 55 System Options Language Selection P. 56 Short-Cut Selection KM Mile Setting P. 56 Map Display Options Voice Recog. Help P. 56 Defined Locations Auto Voice Recognition P. 56 Demo Mode P. 59 Average Speed P. 56 Time P. 59 Background Picture Setting P. 49 Modify Current Location P. 59 Read From Disc P. 44 Hardware Info Appendix Restore Factory Settings 132 P. 59 Shortcut menu P.
MAN-CNDV-50MT-EN.book Page 133 Wednesday, May 4, 2005 1:49 PM Shortcut menu NAVI/AV Shortcut menu : Chg.Route P. 22 : Registration P. 42 : Vicinity Search P. 30 : Whole Route Overview P. 57 : Overlay POI P. 31 : Address Book P. 42 Route Options : Route Options : Edit Current Route P. 38 : Traffic On Route P. 47 P. 131 Menu in the Audio Screen Appendix AUDIO menu AUDIO FAD/BAL (BALANCE) P. 89 EQ MENU P. 90 BASS P. 90 TREBLE P. 90 LOUDNESS P. 91 SUB WOOFER (NON FADING) P.
MAN-CNDV-50MT-EN.book Page 134 Wednesday, May 4, 2005 1:49 PM NAVI/AV INITIAL menu INITIAL FM STEP P. 94 AUTO PI P. 95 AUX P. 95 ILLUMI P. 95 REAR SP TEL/GUIDE P. 95 DISC AUTO P. 96 SUB. D. DIM P. 96 GUIDE VOICE P. 96 REAR SP P. 95 PREOUT P. 95 CAMERA P. 96 POLARITY P. 96 SET UP menu Appendix SET UP AV INPUT P. 96 CAMERA 134 REAR DISP P. 97 FLAP SET BACK P. 97 AUTO FLAP P.
MAN-CNDV-50MT-EN.book Page 135 Wednesday, May 4, 2005 1:49 PM FUNCTION menu RADIO FUNCTION BSM P. 71 REPEAT P. 66 REGIONAL P. 72 RANDOM P. 66 LOCAL P. 71 SCAN P. 66 PTY P. 73 PAUSE P. 66 TA P. 72 AF P. 72 NEWS P. 73 S-DVD (M-DVD) FUNCTION TV REPEAT P. 85 RANDOM P. 85 SCAN P. 85 BSSM P. 84 PAUSE P. 85 COUNTRY P. 84 ITS PLAY P. 79 ITS MEMORY P. 78 FUNCTION FUNCTION Appendix M-CD NAVI/AV FUNCTION DISC [DVD-Video, CD, MP3] DAB FUNCTION AS P. 82 AS LIST P.
MAN-CNDV-50MT-EN.book Page 136 Wednesday, May 4, 2005 1:49 PM DVD SETUP P. 92 LANGUAGE Appendix NAVI/AV DVD SETUP menu 136 SUB. T LANGUAGE P. 92 A SUB TITLE P. 93 AUDIO LANGUAGE P. 92 M. ANGLE P. 93 MENU LANGUAGE P. 92 TV ASPECT P. 93 PARENTAL P.
MAN-CNDV-50MT-EN.
Appendix NAVI/AV MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.
MAN-CNDV-50MT-EN.book Page 140 Wednesday, May 4, 2005 1:49 PM PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
