Operation Manual FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER AVIC-Z120BT AVIC-X920BT Notice to all users: This software requires that the navigation system is properly connected to your vehicle’s parking brake and depending on your vehicle, additional installation may be required. For more information, please contact your Authorized Pioneer Electronics retailer or call us at (800) 421-1404.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Important The screens shown in the examples may differ from actual screens. Actual screens may be changed without notice for performance and function improvements.
Contents – Searching for a city name first 34 – Finding the location by specifying the house number 35 – Searching for a name by entering multiple keywords 36 Setting up a route to your home 36 Searching for Points of Interest (POI) 36 – Searching for POIs by preset categories 36 – Searching for a POI directly from the name of the facilities 37 – Searching for a nearby POI 37 – Searching for POIs around the destination 38 – Searching for POIs around the city 38 Selecting destination from “Favorites” 39 Sea
Contents – How to read traffic information on the map 56 – Viewing the traffic flow 57 – Setting an alternative route to avoid traffic congestion 58 – Selecting traffic information to display 59 Browsing local events 59 Browsing news headlines 60 Browsing stock quotes 61 – Selecting stock symbols 61 – Viewing the detailed stock quotes 61 – Deleting registered stocks 62 Registering and connecting a Bluetooth device Preparing communication devices 63 Registering your Bluetooth devices 63 – Searching for near
Contents Reading the screen 83 Using the touch panel keys 84 – Storing and recalling broadcast frequencies 84 Using the “Function” menu 85 – Stores the strongest broadcast frequencies 85 – Tunes in strong signals 85 HD Radioä reception Starting procedure 86 Reading the screen 86 Using the touch panel keys 87 – Storing and recalling broadcast frequencies 87 Switching the display 88 – Scrolling the detailed information 88 Using the “Function” menu 88 – Storing the strongest broadcast frequencies 88 – Switchi
Contents – Searching for a specific scene and starting playback from a specified time 117 Using the “Function” menu 117 Using an iPod (iPod) Starting procedure 118 Reading the screen 118 Using the touch panel keys 120 Starting the video playback 122 Narrowing down a song or video with the list 122 Operating the functions from your iPod 123 Playing MusicSphere 124 – Reading the screen 124 – Using the touch panel keys 124 Using the “Function” menu 124 6 Using the SIRIUS tuner Starting procedure 139 Reading
Contents Using the demonstration guidance 152 Registering your home 152 Correcting the current location 153 Changing the eco-function setting 153 Displaying the “Map Settings” screen 154 Setting the auto-zoom display 154 Setting the detailed city map 155 Setting the barrier graphic for city map 155 Displaying the traffic notification icon 155 Displaying the Bluetooth connection icon 156 Setting the current street name display 156 Setting the “Favorites” icon display 156 Displaying the 3D landmarks 156 Disp
Contents Available Basic Voice Commands 181 – Basic commands 181 – Voice operation for the iPod 181 – Voice operation for AV source (other than iPod) 182 – Voice commands related to hands-free phoning 183 Tips for Voice Operation 184 Other functions Setting the anti-theft function 185 – Setting the password 185 – Entering the password 185 – Deleting the password 185 – Forgotten password 185 Returning the navigation system to the default or factory settings 186 – Setting items to be deleted 187 – Restore Fa
Chapter Introduction Before using this product, be sure to read Important Information for the User (a separate manual) which contains warnings, cautions, and other important information that you should note. How to use this manual Finding the operation procedure for what you want to do When you have decided what you want to do, you can find the page you need from the Contents.
Chapter 01 Introduction “SD memory card” The SD memory card, SDHC memory card, microSD card and microSDHC card are collectively referred to as the “SD memory card”. Notice regarding video viewing Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights as protected by the Copyright Law. Notice regarding DVDVideo viewing This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Chapter Introduction ing the navigation system to the default or factory settings on page 186. p Do not allow direct sunlight to fall on the LCD screen when this product is not being used. Extended exposure to direct sunlight can result in LCD screen malfunction due to the resulting high temperatures. p When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.
Chapter 02 Basic operation Checking part names and functions This chapter gives information about the names of the parts and the main features using the buttons.
Chapter Basic operation 6 02 8 9 Basic operation 2 3 7 4 5 1 AVIC-X920BT 1 button button to activate voice operaPress the tions. Press and hold the button to switch the AV source to mute. To cancel the muting, press and hold it again. 2 VOL (+/–) button Press to adjust the AV (Audio and Video) source volume. 3 HOME button ! Press the HOME button to display the “Top Menu” screen. ! Press to switch between the “Classic Menu” and the “Shortcut Menu” while the “Top Menu” is displayed.
Chapter Basic operation 02 Adjusting the LCD panel angle p This function is available for AVIC-Z120BT only. CAUTION WARNING When opening, closing and adjusting the angle of the LCD panel, be careful not to get your fingers caught. CAUTION Do not open or close the LCD panel by force. This may cause malfunction. 1 Press the h button. The “Monitor Setup” screen appears. 2 Touch or ! Do not use with the LCD panel left open.
Chapter Basic operation Ejecting a disc (for AVIC-Z120BT) 1 Press the h button. The “Monitor Setup” screen appears. 2 1 Press the h button. The touch panel keys for ejecting the media appear. 2 Touch [Disc Eject]. Touch [Disc Eject]. Basic operation p This section describes operations for AVICZ120BT. 02 The disc is ejected. The LCD panel opens, and the disc is ejected. 3 Remove the disc, and press the h button. The LCD panel closes.
Chapter Basic operation 02 CAUTION ! Do not press the h button when an SD memory card is not fully inserted. Doing so may damage the card. ! Do not press the h button before an SD memory card has been completely removed. Doing so may damage the card. 1 Press the h button. The “Monitor Setup” screen appears. 2 Ejecting an SD memory card (for AVIC-Z120BT) p This section describes operations for AVICZ120BT. 1 Press the h button. The “Monitor Setup” screen appears. 2 Touch [Eject SD]. Touch [SD Insert].
Chapter Basic operation 4 Pull the SD memory card out straight. 02 Ejecting an SD memory card (for AVIC-X920BT) 1 Press the h button. The touch panel keys for ejecting the media appear. 5 Press the h button. The LCD panel closes. p If data related to map data, such as customized POI data, is stored on the SD memory card, the navigation system restarts.
Chapter Basic operation 02 When the data related to map data is stored If data related to map data, such as customized POI data, is stored on the SD memory card, operating procedures are slightly different. 1 Press the h button and then touch [Eject SD]. 2 Touch [Yes]. The navigation system restarts, and a message prompting you to remove the SD memory card appears. ! If data loss or corruption occurs on the storage device for any reason, it is usually not possible to recover the data.
Chapter Basic operation Connecting your iPod Using the USB interface cable for iPod enables you to connect your iPod to the navigation system. p A USB interface cable for iPod (CD-IU50V) (sold separately) is required for connection. Flow from startup to termination 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. p To protect the LCD screen from damage, be sure to touch the touch panel keys with your finger only and gently touch the screen.
Chapter 02 Basic operation 4 Read the disclaimer carefully, checking its details, and then touch [OK] if you agree to the conditions. The map screen appears. Regular startup % Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. p The screen shown will differ depending on the previous conditions. p When there is no route, the disclaimer appears after the navigation system reboots.