English CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS MVH-X580BS Español DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES Français DEH-X8800BHS DEH-X7800BHS DEH-X6800BS Owner’s Manual Mode d’emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Table of Contents Before You Start Before You Start....................................................................................... 2 Getting Started........................................................................................ 3 HD Radio™ Technology/Radio .............................................................. 7 CD/USB/iPod/AUX................................................................................... 8 Bluetooth.............................................................
U.S.A. and CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 For warranty information please see the Limited Warranty sheet included with this unit. English Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
MVH-X580BS Operation Purpose M.C. (multi-control) dial SRC (source)/OFF Display window Head Unit Press DISP repeatedly. Press DISP repeatedly. Return to the previous display/list Press BAND/ Press / to select the next/previous folder. . Return to the normal display Press and hold BAND/ from the menu BAND/ DISP (display) Detach button Remote Control Remote Control Change the display information . – Answering a call Press . Press . Ending a call Press . Press .
Detach Attach How to replace the battery English Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly. Important • Avoid subjecting the front panel to excessive shock. • Keep the front panel out of direct sunlight and high temperatures. • Always store the detached front panel in a protective case or bag.
INITIAL settings WARNING Do not use the unit in standard mode when a speaker system for network mode is connected to the unit. Do not use the unit in network mode when a speaker system for standard mode is connected to the unit. This may cause damage to the speakers. 1 Turn the M.C. dial to select the options, then press to confirm. To proceed to the next menu option, you need to confirm your selection. Menu Item Description CLOCK SET Set the clock. 1 Turn the M.C.
HD Radio™ Technology/Radio (HD Radio™ Technology is only available for DEHX8800BHS/X7800BHS.) The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception. Press SRC/OFF to select [HD RADIO] or [RADIO]. Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. Press a number button (1/ to 6/ You can select a preset channel by pressing HD Radio™ stations offer high-quality audio and data services.
Alert history CD 1 Insert a disc into the disc loading slot with the label side up. (Only for DEH-X8800BHS/X7800BHS) 1 2 While receiving an emergency announcement, press The last four items that have been received appear. . Turn the M.C. dial to select one of the items, then press to confirm. The detail of the selected item appears. NOTE [/TEST/] appears at the beginning of an item if it was a test message. To delete an alert history 1 Press and hold the M.C. dial in step 2 above. 2 Turn the M.C.
Purpose Operation Select a folder/album*1 Press 1/ or 2/ Select a track/song (chapter) Press or Fast forward or reverse*2 Press and hold Search for a file from a list 1 Press to display the list. 2 Turn the M.C. dial to select the desired file (folder) name or category, then press to confirm. 3 Turn the M.C. dial to select the desired file, then press to confirm. Playback starts. Useful functions for iPod . . or . You can access songs based on the artist, album, or genre currently playing.
Bluetooth Bluetooth connection Menu Item Description DEL DEVICE Delete the device information. [DELETE YES], [DELETE NO] ADD DEVICE Register a new device. A.CONN Select [ON] to connect to a Bluetooth device automatically. Important If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly. 1 2 3 4 5 6 7 Turn on the Bluetooth function of the device. Press to display the phone menu. Turn the M.C.
2 3 4 1 2 Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm. If you select [PHONE BOOK], proceed to step 4. Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to confirm. Turn the M.C. dial to select a name or phone number, then press to confirm. The phone call starts. To exit the voice recognition mode, press BAND/ . NOTE For details on the voice recognition features, refer to the manual supplied with your iPhone.
*1 The contacts on your phone will normally be transferred automatically when the phone is connected. If they are not, use your phone to transfer the contacts. *2 If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call. App Mode You can enjoy listening to an application on an iPhone/Android device via the unit. In some cases, you can control an application by using the unit.
NOTE 5 NOTE Press SRC/OFF to select [APP]. Operate the mobile device to start up the application. 6 7 Basic operations You can make various adjustments in the FUNCTION settings (page 19). Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via Bluetooth. When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm.
Basic operations Spotify® You can make various adjustments in the FUNCTION settings (page 19). Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com. The Spotify application is available for iPhone and Android phones, please visit https:// support.spotify.com/ for the latest compatibility information. To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android device.
TuneStart™ Automatically start songs from the beginning when you tune to one of your preset music channels stored on the current band of presets. For details, refer to TUNE START on page 20. NOTE TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100. Scan through short previews of songs you may have missed on music channels stored on the current band of presets. Each song in the current channel plays for six seconds at a time.
To search for a channel from a list 1 2 3 Parental Control Press during playback. Turn the M.C. dial to select a category. Select one of the operations below. Category scan: Press and hold the M.C. dial to switch to category scan. Channel search: Press the M.C. dial to stop a scan. Some SiriusXM channels contain mature content. You can lock these channels. For details, see [PARENTAL CTRL] in SiriusXM settings (page 21).
6 • Select [IPHONE/IPOD] for iPhone. • Select [ANDROID] for Android device. Audio adjustments NOTE 7 8 9 When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed. You can also make various adjustments in the AUDIO settings (page 21).
6 7 Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit (filter) selected in step 4, then press to confirm. Network mode: [1.25K] to [12.5K] (if you choose [HIGH] or [MID LPF]) [25] to [250] (if you choose [MID HPF] or [SUBWOOFER]) Standard mode: [50HZ] to [200HZ] Turn the M.C. dial to select an appropriate slope for the speaker unit (filter) selected in step 4.
Settings You can adjust various settings in the main menu. 3 Turn the ignition switch to ON. • If the vehicle’s air conditioner or heater is turned on, turn it off. • Press SRC/OFF to turn on the source if this unit is turned off. 4 Press and hold SRC/OFF until the unit turns off. 5 Press the M.C. dial to display the main menu. 6 Turn the M.C. dial to select [INITIAL], then press to confirm. 7 Turn the M.C. dial to select [AUTO TA & EQ], then press to confirm.
Menu Item Description Menu Item SAVE Store the information about the song currently being played to your music list on Spotify. UNSAVE Remove the song information stored in [SAVE]. SEL DEVICE iPod Connect a Bluetooth device in the list. [ON], [OFF] Interrupt the currently selected source with emergency announcements or test messages. A beep can be heard when an emergency announcement or test message breaks in. Select [OFF] to disable this function.
Menu Item Description [LOCKED CH], [CLEAR ALL], [EDIT CODE] Description Description EQ SETTING [SUPER BASS], [POWERFUL], Select or customize the equalizer curve. [NATURAL], [VOCAL], [CUSTOM1], • When you select a setting other than [CUSTOM2], [FLAT] [CUSTOM1] and [CUSTOM2], you can also customize the equalizer curve by pressing and Select an equalizer band and holding the M.C. dial, then store the level for further customizing. customized equalizer curve in [CUSTOM1]. Equalizer band: [50HZ] to [12.
Menu Item Description A-EQ & TA [ON], [OFF] Set the auto-adjusted equalizer to suit the vehicle’s acoustics. To use this function, the vehicle’s acoustics must be measured in advance (page 18). Select [OFF] to manually adjust the equalizer curve. SYSTEM settings You can also access to these menus when the unit is turned off. Menu Item Set the clock (page 6).
Menu Item Description PHONE CONNECT [IPHONE/IPOD], [ANDROID] Menu Item [KEY COLOR], [DISP COLOR], [BOTH COLOR] ANDROID WIRED [MEMORY], [APP CONTROL] Select the appropriate connection method for an Android device. • This setting is not available when [BLUETOOTH] is selected in [PHONE CONNECT]. Select [ON] to automatically launch Pioneer ARC APP when an Android device is connected to the unit via AOA. (Not available when [MEMORY] is selected in [ANDROID WIRED].
MIXTRAX settings Menu Item Connections/Installation Description Connections SHORT PLAYBCK [1.0 MIN], [1.5 MIN], [2.0 MIN], [2.5 MIN], [3.0 MIN], [OFF] Select the length of the playback time. FLASH AREA [KEY/DISPLAY], [KEY], [OFF] Select the area for the illumination effect. When [OFF] is selected, the color set under the ILLUMINATION settings (page 23) is used as the display color. FLASH PATTERN [SOUND LEVEL 1] to [SOUND LEVEL Change the illumination effect according to 6] the sound and bass level.
SiriusXM Connect Vehicle Tuner input Power cord input Microphone input Rear output (STD) or middle range output (NW) Front output (STD) or high range output (NW) Antenna input Fuse (10 A) Wired remote input Hard-wired remote control adapter can be connected (sold separately). Subwoofer output SiriusXM Connect Vehicle Tuner (sold separately) Power cord Perform these connections when not connecting a rear speaker or middle range speaker lead to a subwoofer.
recommended to use the clamps (sold separately) to arrange the lead. Installation Important • Check all connections and systems before final installation. • Do not use unauthorized parts as this may cause malfunctions. • Consult your dealer if installation requires drilling of holes or other modifications to the vehicle. • Do not install this unit where: – it may interfere with operation of the vehicle. – it may cause injury to a passenger as a result of a sudden stop.
Additional Information Troubleshooting The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected. – Select another repeat play range. Double-sided tape The sound is intermittent.
ERROR-23 → Unsupported CD format. – Replace the disc. FORMAT READ → Sometimes there is a delay between the start of playback and when you start to hear any sound. – Wait until the message disappears and you hear sound. NO AUDIO → The inserted disc does not contain any playable files. – Replace the disc. SKIPPED → The inserted disc contains DRM protected files. – The protected files are skipped. PROTECT → All the files on the inserted disc are embedded with DRM. – Replace the disc.
– Wait until Pandora allows you to skip again. LOGIN ERROR → Your Pandora account is not logged in. – Disconnect the cable from the device, and log in to your Pandora account. Then reconnect the device. CHECK DEVICE → Device error message displayed in the Pandora application. – Check the connected device. PLEASE CREATE A STATION ON THE PHONE → No station found. – Create a station in the Pandora application on your connected device. SELECT STN → No station selected. – Select a station.
CH LOCKED → The channel has been locked by the Parental Control function. – Set [LOCKED CH] to [OFF] or [CLEAR ALL] to [YES] in the FUNCTION settings (page 21). NO TUNEMIX CH → There is only one music in the band. – Select a band with two or more channels. – Add more music channels to the current band. Auto TA and EQ (Only for DEHX8800BHS) CHECK MIC → The microphone is not connected. – Plug the supplied microphone securely into the AUX input jack.
MP3i (MP3 interactive), mp3 PRO Not compatible Playable folder hierarchy WAV files • WAV file formats cannot be connected via MTP. Sampling frequency .wav 8 and 16 (LPCM), 4 (MSADPCM) 16 kHz to 48 kHz (LPCM), 22.05 kHz and 44.1 kHz (MS ADPCM) AAC files Compatible format File extension Sampling frequency Transmission rate Apple Lossless AAC file bought from the iTunes Store (.m4p file extension) AAC encoded by iTunes .m4a 11.
are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.
CD player (DEH-X8800BHS/X7800BHS/X6800BS) System: Compact disc audio system Usable discs: Compact disc Signal-to-noise ratio: 94 dB (1 kHz) (IEC-A network) Number of channels: 2 (stereo) MP3 decoding format: MPEG-1 & 2 Audio Layer 3 WMA decoding format: Ver. 7, 7.1, 8, 9, 10, 11 (2 ch audio) (Windows Media Player) AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier) WAV signal format: Linear PCM & MS ADPCM (Non-compressed) USB USB standard specification: USB 2.
© 2015 PIONEER CORPORATION. All rights reserved. © 2015 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUE DU CANADA, INC. GARANTIE LIMITI~E GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONICS OF CANADA, INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSAin the U.S.A..