Datasheet

ManualsBrandsPioneer ManualsBlu-Ray PlayersBDP-51

Operating Instructions

Blu-ray Disc PLAYER

51FD_WV_EN.book 1 ページ２００８年８月２６日　火曜日　午前９時５８分

Summary of content (72 pages)

PAGE 1
51FD_WV_EN.
PAGE 2
51FD_WV_EN.book 2 ページ２００８年８月２６日火曜日午前９時５８分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
PAGE 3
51FD_WV_EN.
PAGE 4
51FD_WV_EN.book 4 ページ２００８年８月２６日火曜日午前９時５８分 Information for users on collection and disposal of old equipment and used batteries Symbol for equipment These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
PAGE 5
1FD_WV_EN.book 5 ページ２００８年８月２６日火曜日午前９時５８分 Contents 01 Before you start 05 Adjusting audio and video What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 6 Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 7 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Playable files . . . . . .
PAGE 6
51FD_WV_EN.book 01 6 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 1 Before you start What’s in the box Remote control x 1 STANDBY/ON Putting the batteries in the remote control Audio cable (white/red plugs) x 1 1 OPEN/CLOSE Open the rear cover. TV CONTROL INPUT SELECT CH AUDIO SUBTITLE VOL ANGLE FL DIMMER Video cable (yellow plugs) x 1 Press lightly on this part and slide into the direction of the arrow.
PAGE 7
51FD_WV_EN.book 7 ページ２００８年８月２６日火曜日午前９時５８分 Types of discs/files that can be played 01 Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played.
PAGE 8
51FD_WV_EN.book 01 8 ページ２００８年８月２６日火曜日午前９時５８分 Note • Some discs cannot be played, even if one of the above logo marks is indicated. • To play 8 cm discs, set the disc in the 8 cm disc depression in the center of the disc tray. No adapter is necessary. 8 cm BDROMs cannot be played.  About audio formats The following audio formats are supported on this player: • Dolby TrueHD  Playing BDs • BDs (BDMV) compatible with the formats below can be played.
PAGE 9
51FD_WV_EN.book 9 ページ２００８年８月２６日火曜日午前９時５８分  About region numbers • Some files may not be playable. Blu-ray Disc Player and BD-ROM or DVD-Video discs are assigned region numbers according to the region in which they are sold. • For some files, it may not be possible to use certain functions during playback. This player’s region numbers are: • It may not be possible to play some files, even if they have the extension of a file playable on this player.
PAGE 10
51FD_WV_EN.book 01 10 ページ２００８年８月２６日火曜日午前９時５８分  – Press to turn the TV’s power on and off. • MPEG-1 Audio Layer 3 (MP3) Bit rate: Up to 320 kbps Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz INPUT SELECT – Press to switch the TV’s input. CH +/– – Press to select the TV channel. VOL +/– – Press to adjust the volume.  Playable file extensions 3 AUDIO Press to switch the audio streams/channels (page 28). • Movie files .divx and .
PAGE 11
51FD_WV_EN.book 11 ページ２００８年８月２６日火曜日午前９時５８分 20 POP UP MENU/MENU Press to display the BD-ROM or DVD-Video menus. 16 FL DIMMER Press to switch the brightness of the front panel display. The FL OFF indicator lights when Off is selected. 01 21 DISPLAY Press to display disc information (page 29). 17 ANGLE Press to switch the BD-ROM or DVD-Video camera angles (page 28). 22 TOOLS Press to display/hide the TOOLS menu (page 22).
PAGE 12
51FD_WV_EN.book 01 12 ページ２００８年８月２６日火曜日午前９時５８分 Front Panel Display 1 2 3 PQLS 24HZ CONTROL 50HZ 60HZ 6 5 4 1  Lights during playback. 4 Character display Displays the title/chapter/track number, elapsed time, etc. 2  Lights when playback is paused. 5 24HZ/50HZ/60HZ The frequency of the video frame or field being output lights. 3 PQLS Lights when the PQLS function is activated (page 14). 6 CONTROL Lights when the HDMI Control function is activated (page 14).
PAGE 13
51FD_WV_EN.book 13 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 2 02 Connecting up Connecting a TV Player’s rear panel FRONT SURROUND SURROUND CENTER BACK L L R R AUDIO OUT (2 ch) Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. AUDIO OUT (7.
PAGE 14
51FD_WV_EN.
PAGE 15
51FD_WV_EN.book 15 ページ２００８年８月２６日火曜日午前９時５８分 Caution • If the output video resolution is switched when playing a music CD (CD-DA), the PQLS function does not work. This function will work again after playback stops and restarts.
PAGE 16
51FD_WV_EN.book 02 16 ページ２００８年８月２６日火曜日午前９時５８分 Caution • Video signals are output with a resolution of 576/50i or 480/60i when connected using a video cable (included) or an S-Video cable (commercially available). • When connected to a TV using a video cable or an S-Video cable, also connect using either audio cables (use the included cable for 2-channel connections, a combination of the included cable and commercially available cables for 7.
PAGE 17
51FD_WV_EN.book 17 ページ２００８年８月２６日火曜日午前９時５８分 Connecting using audio cables Connecting using a commercially available digital audio cable Caution • For DTS-HD Master Audio and DTS-HD High Resolution Audio signals, the DTS Digital Surround signals are converted to linear PCM for output (page 50). Connect either an optical digital audio cable or a coaxial digital audio cable. Player’s rear panel FRONT SURROUND When connecting to a 7.
PAGE 18
51FD_WV_EN.book 02 18 ページ２００８年８月２６日火曜日午前９時５８分 Connecting the power cord Connect the power cord after all the connections between devices have been completed. Player’s rear panel FRONT SURROUND SURROUND CENTER BACK L L R R AUDIO OUT (2 ch) AUDIO OUT (7.
PAGE 19
51FD_WV_EN.book 19 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 3 03 Getting Started Making settings using the Setup Navigator menu Be sure to perform these settings when using the player for the first time. When you have this player connected to a Pioneer Flat Screen TV that is compatible with HDMI Control, language settings are imported from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins. 4 Select and set the video and audio output terminals.
PAGE 20
51FD_WV_EN.book 03 20 ページ２００８年８月２６日火曜日午前９時５８分 • When S-Video/Video or Component Video is selected at Video, no sound is output if HDMI is selected at Audio (the warning message shown below is displayed). Follow the procedure below to redo the connections, then select the proper connection at the setup screen. 6 Select the output video resolution from the COMPONENT VIDEO output terminals. Use / to select, then press ENTER.
PAGE 21
51FD_WV_EN.book 21 ページ２００８年８月２６日火曜日午前９時５８分 10 Finish the Setup Navigator menu. Use / to select Finish, then press ENTER. Setup Navigator BD PLAYER Setup is complete! Finish Go Back The setup menu comes back in 30 seconds. Operating the TV with the player’s remote control 03 When the manufacturer code for your brand of TV is set on the player’s remote control, the TV can be operated using the player’s remote control. 1 Input the 2-digit manufacturer code.
PAGE 22
51FD_WV_EN.
PAGE 23
51FD_WV_EN.book 23 ページ２００８年８月２６日火曜日午前９時５８分 2 Select and set the item. Use / to select, then press ENTER. TOOLS TOP MENU RETURN If the message indicating low memory (local storage) appears, erase the BDMV data. Note Caution • Items that cannot be changed are displayed in gray. The items that can be selected depend on the player’s status. • When the BDMV data is erased, all the data of secondary video (Picture-in-Picture), secondary audio, bookmark, etc. that has been stored is erased.
PAGE 24
51FD_WV_EN.book 03 24 ページ２００８年８月２６日火曜日午前９時５８分 Switching the video output terminal Use the procedure below to switch the video output terminal. Switch between the digital output (HDMI OUT terminal) and the analog output (COMPONENT VIDEO, S-VIDEO or VIDEO output terminals).  Switch the terminal from which the video signals are output.
PAGE 25
51FD_WV_EN.book 25 ページ２００８年８月２６日火曜日午前９時５８分  About the frame/field frequency and NTSC/ PAL TV systems 03 By factory default setting, the frame/field frequency is set for an output of 50 Hz, and the video signal output from the S-VIDEO and VIDEO output terminals is set to be output in the PAL TV system format.
PAGE 26
51FD_WV_EN.book 04 26 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 4 Playback Playing discs or files  Resuming playback from where it was stopped (resume playback function) • When  STOP is pressed during playback, the point at which the disc stopped is stored in the memory. When  PLAY is pressed, playback resumes from that point. This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 7.
PAGE 27
51FD_WV_EN.book 27 ページ２００８年８月２６日火曜日午前９時５８分 Playing specific titles, chapters or tracks BD DVD AVCHD CD Playing in slow motion BD DVD AVCHD CD Movie files Music files  04 Movie files Music files While playback is paused, press and hold /  Input the number of the title, chapter or track you want to play. • Use the number buttons (0 to 9) to input the number, then press ENTER. or /.
PAGE 28
51FD_WV_EN.book 04 28 ページ２００８年８月２６日火曜日午前９時５８分 • The subtitles can also be switched using /. Switching the camera angles • The subtitles can also be switched by selecting Subtitle from the TOOLS menu. For BD-ROM and DVD-Video discs on which multiple angles are recorded, the angles can be switched during playback.
PAGE 29
51FD_WV_EN.book 29 ページ２００８年８月２６日火曜日午前９時５８分 • Secondary audio mark is displayed for scenes at which secondary audio is recorded. Displaying the disc information BD DVD AVCHD CD Note • In some cases the secondary audio may switch or the switching screen provided on the disc may be displayed immediately, without the current secondary audio or the total number of secondary audio streams recorded on the disc being displayed.  04 Movie files Music files Press DISPLAY.
PAGE 30
51FD_WV_EN.book 04 30 ページ２００８年８月２６日火曜日午前９時５８分 3 Input the time. Use the number buttons (0 to 9) or / to input the time. 2 Select the type of search. Use / to select, then press ENTER. Use / to move the cursor. See the table on page 33 for the search types.
PAGE 31
51FD_WV_EN.book 31 ページ２００８年８月２６日火曜日午前９時５８分 Playing a specific section within a title or track repeatedly (A-B Repeat) Use this procedure to play a specific section within a title or track repeatedly. Playing repeatedly (Repeat Play) 04 Use this procedure to play the currently playing disc, title, chapter, track or file repeatedly. 1 During playback, press PLAY MODE to display the Play Mode screen. 1 During playback, press PLAY MODE to display the Play Mode screen.
PAGE 32
51FD_WV_EN.book 04 32 ページ２００８年８月２６日火曜日午前９時５８分 Playing in random order (Random Play) Use this procedure to play the tracks or files in random order. 1 During playback, press PLAY MODE to display the Play Mode screen. VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU The Play Mode screen can also be displayed by selecting Play Mode from the TOOLS menu. 2 Select Repeat/Random. Use / to select, then press ENTER.
PAGE 33
51FD_WV_EN.book 33 ページ２００８年８月２６日火曜日午前９時５８分 About Play Mode types 04 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. Disc/file type Play Mode type Repeat play Random Search play 1. 2. 3. 4. 5. 6.
PAGE 34
51FD_WV_EN.book 04 34 ページ２００８年８月２６日火曜日午前９時５８分 Playing from the Home Media Gallery The Home Media Gallery lets you display a list of the titles, tracks or files recorded on the disc. The discs that can be played from the Home Media Gallery are as shown below (see also page 7). • BD-R/-RE discs • DVDs recorded in VR format • Music CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which only data files of movie or music files, etc. are recorded 3 Select the title or track to be played.
PAGE 35
51FD_WV_EN.book 35 ページ２００８年８月２６日火曜日午前９時５８分 3 Select Movies. Use / to select Movies, then press ENTER. 04 Note • It may take a few seconds before playback starts. This is normal. DVD-RW • It may not be possible to play some files properly. • The number of views may be restricted (page 9). Movies Music Playing music files View available movies. 1 Press HOME MEDIA GALLERY to display the Home Media Gallery.
PAGE 36
51FD_WV_EN.book 04 36 ページ２００８年８月２６日火曜日午前９時５８分 • All Songs – All the recorded files are displayed. Music CD-ROM Folders All Songs Playing in the desired order (HMG Playlist) The discs that can add tracks and files to the HMG (Home Media Gallery) Playlist are as shown below. • Music CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which music files are recorded  Adding tracks/files Use this procedure to add tracks and files, and create the HMG Playlist. If you have selected All Songs, proceed to step 6.
PAGE 37
51FD_WV_EN.book 4 37 ページ Press ２００８年８月２６日火曜日午前９時５８分 TOOLS to display the TOOLS menu. HOME MEDIA GALLERY DISPLAY 2 Select HMG Playlist. Use / to select, then press ENTER. 04 POPUP MENU Home Media Gallery BD PLAYER MENU TOOLS TOP MENU CD-ROM HMG Playlist ENTER 5 Select Add to HMG Playlist. Use / to select, then press ENTER. Folders CD-ROM/Music Display the HMG Playlist. Music001.mp3 Music002.mp3 Music003.mp3 Music004.mp3 Music005.mp3 Music006.mp3 BD PLAYER TOOLS Music007.
PAGE 38
51FD_WV_EN.book 05 38 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 5 Adjusting audio and video Adjusting the video 2 Select the item to be adjusted. Use / to select. The quality of the playback picture can be adjusted according to the TV you are using. Video Adjust [ Memory1 ] Prog. Motion Motion Auto1 Pure Cinema 1 During playback, press VIDEO ADJUST to display the Video Adjust screen.
PAGE 39
51FD_WV_EN.book 39 ページ２００８年８月２６日火曜日午前９時５８分  Closing the Video Adjust screen Press HOME MENU.  Closing the Audio DRC screen Press ENTER or  About Pure Cinema 05 HOME MENU.
PAGE 40
51FD_WV_EN.book 06 40 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 6 Advanced settings Changing the settings (Initial Setup) Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. ENTER HOME MENU RETURN PLAY 2 Select and set Initial Setup. Use / to select, then press ENTER. TOOLS TOP MENU ENTER HOME MENU RETURN HOME MENU BD PLAYER Home Media Gallery Initial Setup Set up the player for use. 3 Select the item and change the setting.
PAGE 41
51FD_WV_EN.book 41 ページ２００８年８月２６日火曜日午前９時５８分 06 Note • Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status. • In Options, the factory default settings are indicated in bold. Video Out Setting Options Explanation TV Aspect Ratio 16:9 (Widescreen) Select this when connected to a wide (16:9) TV. 4:3 Video Out DVD 16:9 Video Out NTSC on PAL TV 4:3 (Standard) Select this when connected to a conventional TV.
PAGE 42
51FD_WV_EN.book 06 42 ページ２００８年８月２６日火曜日午前９時５８分 HDMI Setting Options HDMI High-Speed Transmission On Explanation Select this when connected with a High Speed HDMI™ cable (page 14). Off Select this when connected with a Standard HDMI™ cable (page 14). The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting. HDMI Color Space Auto The video signal that is output (YCbCr or RGB) is switched automatically.
PAGE 43
51FD_WV_EN.book 43 ページ２００８年８月２６日火曜日午前９時５８分 Options Setting Options Output Terminal Priority Select the terminals for outputting video and audio signals with priority. For details, see Changing the terminals for outputting video and audio signals (Output Terminal Priority) on page 49. On Screen Display On Select this to display the operation indicators (Play, Stop, etc.) on the TV screen. Off Select this if you do not want to display the operation indicators (Play, Stop, etc.
PAGE 44
51FD_WV_EN.book 06 44 ページ２００８年８月２６日火曜日午前９時５８分  Closing the speaker settings screen Changing the speaker setup Press ENTER. Set whether or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. This setting is only valid for analog audio outputs. Note • Select Initial Setup from the Home Menu, then press ENTER. 1 Select and set Speakers. Use / to select, then press ENTER.
PAGE 45
51FD_WV_EN.book 45 ページ２００８年８月２６日火曜日午前９時５８分 3 Select and set the method for switching the speaker to be adjusted. Use / to select, then press ENTER. 1 Select and set Parental Lock. Use / to select, then press ENTER.
PAGE 46
51FD_WV_EN.book 06 46 ページ２００８年８月２６日火曜日午前９時５８分 Use / to move the cursor. 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Initial Setup BD PLAYER Video Out Audio Out Speakers HDMI Language Parental Lock Options Setup Navigator Use / to move the cursor.
PAGE 47
51FD_WV_EN.book 47 ページ２００８年８月２６日火曜日午前９時５８分 Changing the Parental Lock level for watching DVDs 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. 06 Use / to move the cursor. Some DVD-Video discs containing scenes of violence, for example, have Parental Lock levels (check the indications on the disc’s jacket or elsewhere). To restrict watching these discs, set the player’s level to the level lower than the discs.
PAGE 48
51FD_WV_EN.book 06 48 ページ２００８年８月２６日火曜日午前９時５８分 Changing the Country/Area code BD DVD AVCHD CD 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. Movie files Music files Note • Refer to Country/Area Code Table on page 57. 1 Select and set Parental Lock. Use / to select, then press ENTER.
PAGE 49
51FD_WV_EN.book 49 ページ２００８年８月２６日火曜日午前９時５８分 Changing the terminals for outputting video and audio signals (Output Terminal Priority) Set the video and audio terminals to be used. 4 Select the terminal for outputting audio signals. Use / to select, then press ENTER. 1 Select and set Options. Use / to select, then press ENTER. • HDMI – HDMI OUT terminal • Digital Audio – DIGITAL OUT (COAXIAL/OPTICAL) terminal • Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT (7.
PAGE 50
51FD_WV_EN.book 06 50 ページ２００８年８月２６日火曜日午前９時５８分 About the audio output settings The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table below. AUDIO OUT terminal Audio format 2ch2 BD-ROM Dolby Digital 5.1-channel audio Converted to 2-channel audio Linear PCM Dolby Digital MPEG-2 AAC Converted to 2-channel audio 5.1-channel audio MPEG Dolby Digital DTS Digital Surround Converted to 2-channel audio 5.
PAGE 51
FD_WV_EN.book 51 ページ２００８年８月２６日火曜日午前９時５８分 Chapter 7 07 Additional information Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used.
PAGE 52
51FD_WV_EN.book 07 52 ページ２００８年８月２６日火曜日午前９時５８分 Problem Check Remedy Picture is stretched. Aspect ratio cannot be switched. Is the TV’s aspect ratio properly set? Read the TV’s operating instructions and set the TV’s aspect ratio properly. Is 4:3 Video Out properly set? • Set 4:3 Video Out properly (page 41).
PAGE 53
51FD_WV_EN.book 53 ページ２００８年８月２６日火曜日午前９時５８分 Problem Check Multi-channel sound is not output. Is the AV receiver or amplifier, etc. connected to the HDMI Read the operating instructions of the connected AV receiver OUT terminal, the AUDIO OUT (7.1 ch) terminals or DIGITAL or amplifier and check the audio output settings of AV receiver OUT (COAXIAL/OPTICAL) terminal? or amplifier.
PAGE 54
51FD_WV_EN.book 07 54 ページ２００８年８月２６日火曜日午前９時５８分 When connected using an HDMI cable Problem Check HDMI indicator does not light. Is the video output terminal other than the HDMI OUT terminal The HDMI indicator lights when video signals are being output selected? from the HDMI OUT terminal. Press VIDEO SELECT to switch to the HDMI OUT terminal (page 24). No picture is displayed.
PAGE 55
51FD_WV_EN.book 55 ページ２００８年８月２６日 Problem 火曜日午前９時５８分 Check HDMI Control function does Is HDMI Control set to On on the connected device? not work (continuous). Are multiple players connected? Remedy 07 Set HDMI Control to On on the connected device. The HDMI Control function works when HDMI Control is set to On for all the devices connected by HDMI cable. Once connections and settings of all the devices are finished, be sure to check that the player’s picture is output to the Flat Screen TV.
PAGE 56
51FD_WV_EN.book 07 56 En 56 ページ２００８年８月２６日火曜日午前９時５８分 Problem Check Remedy The Hybrid Disc Playback setting cannot be changed (displayed in gray). Is a disc set in the disc tray? The Hybrid Disc Playback setting cannot be changed when a disc is set. Remove the disc, then change the setting. BDMV/BDAV Playback Is a disc set in the disc tray? Priority setting cannot be changed (displayed in gray). The BDMV/BDAV Playback Priority setting cannot be changed when a disc is set.
PAGE 57
51FD_WV_EN.
PAGE 58
51FD_WV_EN.book 07 58 ページ２００８年８月２６日火曜日午前９時５８分 Specifications Model BDP-51FD Type Blu-ray Disc PLAYER Rated voltage AC 220 V to 240 V Rated frequency 50 Hz/60 Hz Power consumption 34 W Power consumption (standby) 0.5 W Weight 5.6 kg External dimensions (including projecting parts) 420 mm (W) x 124 mm (H) x 361 mm (D) Tolerable operating temperature +5 °C to +35 °C Tolerable operating humidity 5 % to 85 % (no condensation) Output terminals Video 1 set, RCA jack (1.
PAGE 59
51FD_WV_EN.book 59 ページ２００８年８月２６日火曜日午前９時５８分 Cautions on use Moving the player If you need to move this unit, first remove the disc if there’s one loaded, and close the disc tray. Next, press  STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel display goes off. Wait at least 10 seconds. Lastly, disconnect the power cord. Never lift or move the unit during playback — discs rotate at a high speed and may be damaged.
PAGE 60
51FD_WV_EN.book 07 60 ページ２００８年８月２６日火曜日午前９時５８分 Handling discs Glossary Do not use damaged (cracked or warped) discs. Do not scratch the disc’s signal surface or let it get dirty.  Aspect ratio Do not load more than one disc into the player at a time. The ratio of a TV screen’s width to its height. Conventional TVs have an aspect ratio of 4:3, while high definition (HD) and widescreen TVs have an aspect ratio of 16:9.
PAGE 61
51FD_WV_EN.book 61 ページ２００８年８月２６日火曜日午前９時５８分  Deep Color This is one of the capabilities of HDMI™. The players supporting Deep Color can transmit a video signal with a color bit depth of greater than 8 bits per color component. Subtle color gradations can be reproduced when connected to a TV that supports Deep Color.  DivX DivX is a media technology developed by DivX, Inc. DivX media files include moving picture data.  Dolby Digital Dolby Digital is an audio format to record the sound in up to 5.
PAGE 62
51FD_WV_EN.book 07 62 ページ２００８年８月２６日火曜日午前９時５８分  Region number  Secondary video A number assigned to Blu-ray Disc Players, BD-ROM and DVDVideo discs according to the region in which they are sold. A disc can be played if the region numbers indicated on the disc include the number set for the player or if “ALL” is indicated. Some BD-ROMs include sub videos superimposed on the main videos using the Picture-in-Picture function. These sub videos are called “secondary video”.
PAGE 63
51FD_WV_EN.book 63 ページ２００８年８月２６日火曜日午前９時５８分 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). 4.
PAGE 64
51FD_WV_EN.book 07 64 ページ２００８年８月２６日火曜日午前９時５８分  libpng COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. libpng versions 1.2.6, August 15, 2004, through 1.2.26, April 2, 2008, are Copyright © 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.
PAGE 65
51FD_WV_EN.book 65 ページ２００８年８月２６日火曜日午前９時５８分 example.c Sample code for calling the JPEG library. structure.doc Overview of the JPEG library's internal structure. filelist.doc Road map of IJG files. coderules.doc Coding style rules --- please read if you contribute code. Please read at least the files install.doc and usage.doc. Useful information can also be found in the JPEG FAQ (Frequently Asked Questions) article. See ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
PAGE 66
51FD_WV_EN.book 07 66 ページ２００８年８月２６日火曜日午前９時５８分 The best full description of JPEG is the textbook "JPEG Still Image Data Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG standards (DIS 10918-1 and draft DIS 10918-2). This is by far the most complete exposition of JPEG in existence, and we highly recommend it.
PAGE 67
51FD_WV_EN.book 67 ページ２００８年８月２６日火曜日午前９時５８分 Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
PAGE 68
51FD_WV_EN.book 07 68 ページ２００８年８月２６日火曜日午前９時５８分 the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
PAGE 69
51FD_WV_EN.book 69 ページ２００８年８月２６日火曜日午前９時５８分 the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library.
PAGE 70
51FD_WV_EN.book 07 70 En 70 ページ２００８年８月２６日火曜日午前９時５８分 If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.
PAGE 71
51FD_WV_EN.book 71 ページ２００８年８月２６日火曜日午前９時５８分 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
PAGE 72
51FD_WV_EN.book 72 ページ２００８年８月２６日火曜日午前９時５８分 Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu) PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.