DAB+ Digital Radio Adaptor with Bluetooth SDA-11DAB Operation Manual
Declaration of Conformity with regard to the Radio Equipment Directive 2014/53/EU Manufacturer: Pioneer Corporation 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan EU Representative’s & Importer: Pioneer Europe NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium http://www.pioneer-car.eu [*] SDA-11DAB English: Hereby, Pioneer declares that the radio equipment type [*] is in compliance with Directive 2014/53/EU.
Deutsch: Hiermit erklärt Pioneer, dass der Funkanlagentyp [*] der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EUKonformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://www.pioneer-car.eu/compliance Ελληνικά: Με την παρούσα ο/η Pioneer, δηλώνει ότι ο ραδιοεξοπλισμός [*] πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: http://www.pioneercar.
Pioneer igazolja, hogy a [*] típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: http://www.pioneer-car.eu/compliance Latviešu valoda: Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: http://www.pioneer-car.
Pioneer niniejszym oświadcza, że typ urządzenia radiowego [*] jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: http://www.pioneercar.eu/compliance Norsk: Herved Pioneer erklærer at radioutstyr type [*] er i samsvar med direktiv 2014/53/EU. Den fullstendige teksten i EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: http://www. pioneer-car.
Banda(s) de frecuencia: de 2 400 MHz a 2 483,5 MHz Deutsch: [Bluetooth-Spezifikationen] Ausgangsleistung: maximal +4 dBm (Leistungsklasse 2) Frequenzband/-bander: 2 400 MHz bis 2 483,5 MHz Nederlands: [Bluetooth-specificaties] Uitgangsvermogen: +4 dBm maximaal (vermogensklasse 2) Frequentieband(en): 2 400 MHz tot 2 483,5 MHz English: [FM transmitter specifications] Output power: 50 nW e.r.p. (-43 dBm e.r.p.
English This guide is intended to guide you through the basic functions of this unit. For details, please refer to the operation manual stored on the website. http://www.pioneer-car.eu Before You Start Thank you for purchasing this PIONEER product. To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.
dangerous and could expose you to the risk of electric shock, injury or other hazards. Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device. CAUTION Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
Control Unit and Connectors
Controls
Included in the box 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Main unit, DAB+ adaptor DAB+ active antenna Micro USB Power Cable 3.5mm Audio Cable Dual USB power adaptor Dash mount stand Windscreen mount stand Installation tool Cleaning wipes Safety strap Note: All accessories are designed to work specifically with SDA11DAB. Please do not use third party accessories as these may not work and cause negative impact to DAB reception performance. 1.
4. you are sure that the glass lets the signal through, and where you stick it, make sure the antenna film does not overlap with the heating wires, which will affect the reception performance. Now remove the adhesive backing from the antenna amplifier box and stick to the dry windshield glass, gently applying pressure to remove any air bubbles. Magnetic grounding tap Antenna cable Antenna amplifier box Antenna film 5. 6.
Dashboard Mounting 1. 2. 3. Bond strength is dependent upon the amount of adhesive-tosurface contact developed. Apply firm application pressure to develop better adhesive contact & thus improving bond strength. To obtain optimum adhesion, the dashboard bonding surfaces must be clean and dry. Application to surfaces at temperatures below 10°C (50°F) is not recommended because the adhesive becomes too firm to adhere readily. However once correctly applied low temperatures holding is generally satisfactory.
Menu Button Preset Buttons Next Preset Row Button - Long press to enter menu settings. - Press to change audio source. - Long press to store preset stations. - Press to recall preset stations. - Press to switch to the next row of presets (1-3 / 4-6). Display Indication DAB signal level. Bluetooth is activated. TA SF 87.5MHz DAB Traffic Announcement (TA) is activated. DAB Service Following (SF) is activated . FM transmission frequency. Handsfree voice is via the car speakers.
Operation SDA-11DAB 1. 2. 3. 4. 5. Mount the SDA-11DAB to the windshield or dashboard. Connect the antenna to the antenna input at the back of SDA11DAB Connect the USB power supply cable to the back of SDA11DAB and the other end to the dual USB power adaptor. Plug the dual USB power adaptor to the vehicle 12V cigarlighter socket. Turn on the power switch on the top of the unit and the device will automatically scan for DAB+ channels and store them in the memory of the device.
2. 3. After auto scanning has completed, and a “vacant” frequency is found, press the “RETURN” button to confirm and return to the previous menu, or it will automatically confirm and exit the setting after 3 seconds. The selected “vacant” frequency will be shown at the top of the display, e.g. 87.6MHz Tune your vehicle FM radio system to match the selected “vacant” frequency for transmission of the audio signal from SDA-11DAB to your car stereo audio system wirelessly via FM.
Note: In “Line Out” mode, there is no FM transmission to the vehicle stereo. Audio is transferred via the cable instead. Tuning DAB+ Stations/Services: 1. 2. 3. Press the “MENU” button until “DAB+ Radio” source is selected. Use the “ROTARY COMMANDER” to select the desired DAB+ station Or press and hold “MENU” button to select “Station List” and use “ROTARY COMMANDER” to select the desired DAB+ station and press the “ROTARY COMMANDER” button to confirm.
added DAB+ channels, then you may need to perform the “Updating Stations” again. Service Information: DAB+ source: The Service Information display -The Service Information data will be displayed with scrolling text which is being broadcasted from the station. While listening to DAB+, the display will show the followings if applicable: 1. Channel Name 2. Multiplex Name（DLS） 3. Signal Strength 4. FM Transmitting Frequency 5. Bluetooth Connection Status 6. Audio Out/In Status Indicator 7.
Note: Upon certain situations, you may want to turn off the SF function to prevent the product from switching between equally strong transmitters from different areas. In this instance, it is recommended to turn off the SF function. Traffic Announcements (TA) ON/OFF: 1. 2. 3. Press and hold the “MENU” button to enter menu setting, select “DAB Settings” and “Traffic Announcement”, then choose “On” or “Off”. SDA-11DAB default setting for Traffic Announcements is ON.
Station Group: 1. 2. 3. To select station group, press and hold “MENU” button to enter menu, select “DAB Settings” and “Station Group”. A list of DAB ensemble will be displayed Use “ROTARY COMMANDER” to scroll and select the desired DAB ensemble and a list of DAB stations will be displayed. Press the “ROTARY COMMANDER” to select and press it again to confirm. Then press “RETURN” button to exit. Ever Scroll: 1. 2.
1. 2. In DAB source, to select a DAB+ station by turning the “ROTARY COMMANDER”, then press and hold “ROTARY COMMANDER” to pop up “Store Presets” menu and a list of vacant space to store, turn “ROTARY COMMANDER” to choose the location (1-30), press it again to store and a message of “Stored Successfully” will be displayed. Press “RETURN” button to exit menu. Or in DAB source, press and hold “MENU” to enter menu, select “Preset Settings” and “Store Presets”, turn “ROTARY COMMANDER” to select location.
4. 5. 6. 7. pairing mode, a message of “Pairing in progress” will be shown and the white Bluetooth icon will flash. From your phone, turn on Bluetooth and search for Bluetooth devices, a list of available Bluetooth devices will be displayed. Select “SDA-11DAB” in the device list and once connection is established, the flashing white Bluetooth icon will stop flashing and change to blue colour, indicating the “SDA-11DAB” is now connected to the phone.
Bluetooth Handsfree Voice Using Built-In Speaker or Vehicle Stereo via FM-Transmission: 1. 2. 3. 4. 5. Press and hold the “MENU” button to enter menu setting, Use the “ROTARY COMMANDER” to scroll down the menu to select “System Settings”, “Handsfree Speaker”, then select “Built-in Speaker” or “Car Stereo Speaker”. If “Built-in Speaker” is selected, an icon of “ ” will be shown at the top of the display. If “Car Stereo Speaker” is selected, an icon of “ ” will be displayed.
2. 3. one, you have to first disconnect the last phone by selecting “Forget this Device” in your Phone Bluetooth setting. Then press and hold the “ROTARY COMMANDER” to enter pairing mode again. You may pair up to eight Bluetooth devices with SDA11DAB.
2. To connect an external music player, press the “MENU” button until you see “AUX IN” source, at the same time, the Aux-IN icon will be displayed. Connect an external audio source to the “AUX IN” jack at the back of SDA-11DAB with the provided 3.5mm audio cable. Dual USB Charger You can charge a third party device, using the USB cable from your device, thanks to the Dual USB power adaptor supplied with the SDA-11DAB. (Charging Power Output: 5V, 1A). LCD and Button Dimmer Control 1. 2.
Select Language 1. 2. Press and hold the “MENU” button to enter menu setting. Use the “ROTARY COMMANDER” to scroll up or down to select “System Settings” and “Language”, then press “ROTARY COMMANDER” to select your desired language and press “RETURN” button to exit menu. Factory Reset 1. 2. Press and hold the “MENU” button to enter menu setting. Use the “ROTARY COMMANDER” to scroll up or down to select “Factory Reset” and “Yes” to reset the factory settings. Software Version of the device 1. 2.
Additional Information Troubleshooting 1. No display. The USB cable is not properly connected to the dual USB power adaptor or the main DAB unit. The dual USB power adaptor is not properly installed in the car cigarette power socket. Please check the unit is turned on at the top of the SDA-11DAB. 2. The sound is intermittent. You may be using a device, such as car digital video recorder (or Dashcam), GPS tracker, wireless phone charger or LED light inside the car that could cause interference.
5. terminated. A Bluetooth-connected cellular phone is currently being operated. Stop using the cellular phone. The connection between the cellular phone and the DAB unit is not established correctly after a call made by Bluetoothconnected cellular phone. Make the connection again. No sound is produced.
