Instruction manual VM- 50 / VM- 50- W / VM- 70 / VM- 80 Active Monitor Speaker pioneerdj.com/support/ For FAQs and other support information for this product, visit the above site.
Introduction Main Features • • • • • “Vortex bass accelerator” structure to achieve a fast response rich bass sound. Constant directivity Horn to achieve powerful medium and high range sound and broad uniform listening space. Rigid aluminum front baffle to reduce unwanted vibrations. Class D amplifier with 96 kHz sampling to enable wide bandwidth sound reproduction. “DSP control” to enable 16-band adjustment in accordance with the use, room acoustic properties, and preferences.
Rear Panel Facilities 1 Bass-reflex duct “Vortex bass accelerator” structure of the bass-reflex duct to achieve high-speed deep bass reproduction. 1 a 9 2 3 4 5 8 6 7 2 Switch for switching HIGH EQ Use to switch between four types of EQ setting: ROOM 1, FLAT, ROOM 2, and BRIGHT TREBLE. For details see “DSP CONTROL” on page 4. 3 Switch for switching LOW EQ Use to switch between four types of EQ setting: ROOM 1, FLAT, ROOM 2, and CLUB BASS. For details see “DSP CONTROL” on page 4.
DSP CONTROL This unit has a function for adjusting the frequency characteristics in accordance with the installation location or environment. Carry out the adjustment using a combination of the two dials on the rear panel. At the time of shipment from the factory it is set so that flat properties can be obtained in an anechoic chamber, so perform the adjustment to suit the installation environment.
Connections • • • When making or changing connections, always turn off the power and disconnect the power cord from its outlet. Also, be sure to read the operating instructions for the other components to which you are connecting these speakers. Do not plug in the power cord until all other connections have been completed. • • Use only the furnished accessory power cord.
Specifications VM-50/VM-50-W Type VM-70 VM-80 Bi-amp 2-way active speaker Amplifier Amplifier type Class D with DSP LF amplifier 30 W 70 W 90 W HF amplifier 30 W 30 W 30 W Input connectors (balanced input) XLR/TRS combo × 1 Input connectors (unbalanced input) RCA × 1 Input impedance 10 kΩ Speaker Enclosure Bass reflex Enclosure material Woofer (LF driver) MDF vinyl laminate 5.25" (133 mm) cones Tweeter (HF driver) Reproduction frequency band 6.
© 2020 AlphaTheta Corporation. All rights reserved. 6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa 220-0012 JAPAN 〒220-0012 神奈川県横浜市西区みなとみらい4丁目4番5号 横浜アイマークプレイス6階 6F, Йокогама i-Mark Place, 4-4-5 Минатомирай, Ниси-ку, Йокогама, Канагава 220-0012 ЯПОНИЯ Artemis Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QE, U.K. TEL: +44-203-7617-220 2050 W. 190th Street, Suite 109, Torrance, CA 90504, U.S.A.
