Specifications

SPECIFICATION FOR UST106 PRO
Output Power: 100 Watt Peak Visual, 10 Watt Aural
Output Frequency Range: UHF Channel 14-69 (470-806 MHz)
Type of Emission: Visual 5M75C3F, Aural 250kF3E
Frequency Stability: Input Source dependent
Output Load Impedance: 50 ohms, Type N female connector
Output Frequency Response: +/- 2 dB over 6 MHz channel
Video Performance:
Differential Gain 0.5 dB typical
Differential Phase 3 degrees typical
K factor 2% typical
3 tone IMD -52 dB typical
Harmonics: -60 dB relative to visual peak power
Spurious Products: -50 dB relative to visual peak power
(Frequencies >3 MHz outside of channel)
Input Power: +40 dBmv nominal
Input Impedance: 75 ohms, BNC female connector
Input Carrier Frequency: 45.75 MHz (NTSC Visual carrier)
Temperature Range:
Operating -30 to +45 degrees C
Storage –40 to+70 degrees C
Power Consumption:
Operating 550 VA typical at rated Power Output
Standby 200 VA typical
Input Power Source: 110 VAC +/- 5%, 60 Hz
Dimensions:
Width 22 inches (56 cm)
Height 67 inches (171 cm)
Depth 18 inches (45 cm)
Weight: 240 lbs (109 Kg)