Use and Care Manual

Fabric Cleaning Codes

“W"

Code W stands for ‘Water based cleaner’ and these are the easiest fabrics to clean. This is not

the same as being machine washable, however. This code means that you can spot clean your

fabric with a water-based shampoo or foam upholstery cleaner. You can use a brush to agitate

the cleaner or even an upholstery attachment on a carpet cleaner. Be careful to avoid over-

wetting the stain

“S”

Fabrics that are Code S must be cleaned with solvents (dry clean only). You can spot treat stains

with a water-free solvent or dry-cleaning product. Use solvent cleaners in a well-ventilated

room and keep away from open flames. Avoid using cleaning products containing carbon

tetrachloride, as it is highly toxic.

“W/S”

A W/S code means that a combination of dry cleaning solvents and water-based cleaners may

be used. These fabrics can be spot cleaned with upholstery shampoo, foam from a mild

detergent, or a mild dry cleaning solvent. This is a case, where the pre-test is especially

important. For overall dirt, call a professional to clean these fabrics.

“X”

If you have fabrics with Code X, they can only be cleaned by vacuuming or light brushing. A

Code X means the fabric is not cleanable with water or solvent cleaners.

PAGE 1
Fabric Cleaning Codes “W" Code W stands for ‘Water based cleaner’ and these are the easiest fabrics to clean. This is not the same as being machine washable, however. This code means that you can spot clean your fabric with a water-based shampoo or foam upholstery cleaner. You can use a brush to agitate the cleaner or even an upholstery attachment on a carpet cleaner. Be careful to avoid overwetting the stain “S” Fabrics that are Code S must be cleaned with solvents (dry clean only).