Installation Instructions

QUICK START
1. Go to iPhone Settings, turn on Bluetooth in the Settings.
2. Hold down ■ key until it flashes BLUE light on space bar.
3. Select Physibo Keyboard in Bluetooth.
FEATURES
˙
iPhone HOME button: Press once to wake,
press twice for apps and hold for Siri
˙
To CAPITALIZE, press and hold the letter
˙
ALTERNATE characters, press ALT key
˙
Press SPACE BAR twice to insert period
˙
LOCK KEYBOARD. press ALT +
˙
DISCONNECT or UNPAIR: Hold (
˙
) for 3 seconds
(RED and BLUE light will flash for disconnect)
RECONNECT: Press any key
Welcome
Thank you for purchasing Physibo. The best keyboard
case for iPhone X, Xs and 11. The key to faster and more
accurate typing with less miss typing.
For Physibo video tutorials, including instructions, the
feature demonstrations and etc., please visit
https://www.physibo.com
:
First Step. Pairing
Pairing your Physibo to your iPhone is very simple and
easy, once it’ s completed it will automatically connect in
the future.
1. On your iPhone, go to Settings→ Bluetooth and
ensure Bluetooth is turned on and discoverable
2. On your Physibo, hold down the Bluetooth Key
˙
until
you see a FLASHING BLUE light.
*Note:if the light is solid BLUE (on the Space bar),
keep holding it until it starts flashing.
3.On your iPhone, select “Physibo Keyboard” under
“My Devices” on Bluetooth setting.
4. Start using Physibo.
:
Charging
Depending on your usage, we recommend charging
your Physibo every 3 to 10 days by using the included
micro USB charge cable.
While charging, a solid RED light will be visible via the
battery indicator (to the left of the “A” Key), and will turn
GREEN when charging is complete.
:
Battery
Press and hold the shift key ( ) for 3 seconds.
On the space bar, a RED LED will indicate three flashes
when full, two flashes when the battery is at 50% and one
flash when the battery is low. When the battery has dropped
below 20%, Physibo will give you a warning by flashing
RED on the space bar every 5 minutes.
:
Keyboard Lock/Unlock
To prevent unwanted keyboard input, press ALT +
to lock the Physibo keyboard. The blue light on the space
bar indicates that the keyboard is locked.
If a key is pressed while the keyboard is locked, the space
bar will flash RED to indicate that the lock is active.
Press ALT + to unlock the keyboard. The space bar
flashes blue twice to indicate that the keyboard is unlocked
:
Currency
To switch currencies, press and hold ALT + to switch
between dollars, euros, pounds, and yen. The last currency
you choose will remain until another currency is selected.
:
Caps & Alt Lock
This feature remains Enable until disabled.
In Physibo, Caps & Alt Lock function is disabled by default.
To activate this feature, press and hold the Alt key until
the space key blinks BLUE (approximately 10 seconds).
To disable this feature, press and hold the Alt key until the
space key blinks blue (approximately 10 seconds).
Caps & Alt Lock Use: (feature must be enabled first)
Press the Shift key twice to turn on Caps Lock.
Press the ALT key twice to turn on the alternate ALT key
lock. Double-press any key again to turn off the respective
function.
:
Re-Connecting Physibo
If you need to reconnect Physibo for any reason,
check the following:
1. First, go to [Settings] → [Bluetooth] and check the status
of Physibo. Its status is displayed on the right side of the
device ([Physibo Keyboard] in [My Device])
* Note: If it is not in the list, return to the description
of “First Step. Pairing” .
2. If the [Physibo Keyboard] is still listed as a Bluetooth
device with “Not Connected” status, press and hold ■
until the BLUE light comes on.
Note: If it is flashing BLUE, it will not be reconnected.
Press and hold ■ until BLUE lights up
3. If you can't reconnect, go to [Settings] → [Bluetooth],
unpair Physibo from iPhone, and find [Physibo Keyboard]
in [My Device].
Press @ and select “Forget this device” . Refer to the
“First Step. Pairing” procedure to pair Physibo again.
All devices:
Any changes or modifications not expressly approved by
the compliance officer may void the user's authority to
operate the equipment.
Part 15B compliance statement:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to
provide adequate protection from harmful interference
in residential installations.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and
receiver
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
https://www.physibo.com
Battery
| | | Currency | Keyboard/Lock
Indicator
Home
Button
Backlight
Bluetooth
Keyboard
Lock
Currency
Model Name:PB001
FCC ID:2AUP6-TK1003