HellowayTM PTE-P70 In-Building Signal Booster User Manual 1/6
SAFTY WARNING WARNING: The human user’s body should always be separated from the antenna of the equipment by at least 25cm (10〞). Do not remove the covers during working. Do not try to repair or replace any components inside of the equipment. Alteration or abuse of the equipment or other components will void this product’s warranty, and could be dangerous to the user. PACKAGE CONTENTS sddg 1 2 1. 1x PTE-P70 Booster with N Female connectors. 2. AC Power Adaptor. 3.
1. Prepare a location. Place or Fix the equipment on a sturdy, and the surface in a well-ventilated area, makes sure that the air vents are not blocked. 2. Connect the Inside Antenna: The indoor antenna is intended for indoors use only. Remove the cap from the Amplifier connector marked with CELLULAR PHONE. Screw the indoor antenna in to the CELLULAR PHONE connector and make sure to tighten it. 3. Connect the Outside Antenna: The outdoor antenna is for outdoor use only.
(Optional) 1. Mounting the Amplifier with Velcro: You can leave the Amplifier on top of a flat surface or use the enclosed Velcro straps to mount the Amplifier. There are two Velcro strips (hook-and-loop pairs) in the box for mounting the amplifier. Determine the location where your Amplifier will be placed. Clean the intended surface and allow it to dry. Peel the protective paper from the back of the hook sides of the Velcro.
TROUBLESHOOTING AND SUPPORT During using your Amplifier, if the Amplifier interferes with your radio or other electronic device, move the Amplifier further away from those devices, you might be able to solve it yourself. If necessary,please contact your local dealer or send e-mail to our support team by the following methods: E-mail: support@phonetone-tech.com If you want to know about Phonetone Company and products for more information, please visit at: www.phonetone-tech.
This warranty does not cover the following: Failure resulting from misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by you; The warranty is voided by removal or alteration of identification labels on the Machine or its parts. Copyright Information © 2012 Copyright Phonetone Technology (Shenzhen) Co., Ltd. The information contained in this document is subject to change without notice.