User's Manual

Product Introduction
Specification
Product appearance
This product uses safe and reliable high capacity lithium polymer
battery, with stable and reliable protection circuit, perfect charging
protection circuit, high efficiency boost conversion circuit, maximum
battery life of your mobile devices, and fashionable appearance, is the
perfect "companion" of mobile devices.The product supports charging
mobile devices with wireless charging, in line with the Qi standard.
LED state
Percentage of capacity
All four lights were on
100%Charging completed
LED1,LED2,LED3light, LED4 flash 75％-99%
LED1,LED2light, LED3 flash 50％-75%
LED1light,LED2flash 25%-50%
LED1flash ﹤25％
Connect the USB end of the charging cable to the charging device, and the
other end to the Type-c input interface of the mobile power supply;After
theconnection, the mobile power automatically starts to charge, the
powestatus indicator shows the power and charging status.
Mobile power supply to charge digital devices
Check whether the charging voltage of the device matches the output
voltage of the mobile power supply;
Put the device supporting wireless charging close to the wireless charging
induction area of the mobile power supply. The mobile power supply will
automatically charge the digital device. If it is not automatically recognized,
please click the switch button.
Charge the portable power supply
1）Charger: Charge through the quick charging adapter or ordinary 5V
adapter connected to the product type-c port，
Charging voltage current：DC5V2A,9V1.1A
Mobile power charging, four white LED display according to the current
electric quantity, the current electric quantity of the LED light flash.It will be
off after 20 seconds. If you press the button again to check the electric
quantity when charging, the current electric quantity and charging status
will be displayed. It will be off after 10 seconds.
2）Discharge: When plug in the Type-c port line, the product will start to
boost output and charge the device.At this point, the LED power indicator
lights up (5S off).If type-c and wireless charger are output at the same time,
wireless charger output is preferred.Single press the button can turn on the
wireless output, wireless power indicator light on.
SAFETY INFORMATION
FCC WARNING
Power display
Charging instructions
Dimension
Weight
Operating temperature
Relative humidity
Storage temperature
Type-C Output
Type-C Input
DC 5V/2A, 9V/1.1A
DC 5V/2A, 9V/1.1A
Charging distance
Efficiency
<8mm
72%
Wireless Output 5W, 7.5W, 10W max
Capacity 5000mAh 3.7V 18.5Wh
95x64x14mm
135±5g
0 ℃ to 40 ℃
up to 80%
-20 ℃ to 60 ℃
Specifications
Check the compatibility by reading the product information
before use.
Do not place any metal objects, credit cards, magnets, RFID
chips, etc. between your device and the wireless charger.
When the product is not in use, disconnect it from the power
source.
Use the product only for its intended purpose.
Incorrect use of the product may cause a risk of fire, explosion
or other hazards, and may result In the warrannty being voided.
This product is not a toy. It may contain small parts. Keep out
of reach of children.
Store the product in a clean and dust-free environment.
Do not expose the product to high or low temperatures. Keep
the product dry.
Do not disassemble the product. Improper modifications can
damage the product and Cause serious injuries.
Do not use the product if it is damaged or if you suspect any
strange odors.
Use only a soft, clean, dry cloth to clean the surface of the
product.
The phone may only be charged while it is laying on the table.
Other use cases, such as charging it while wearing it on the
body/hold on hand, are not allowed.
When discharging, press the button to check the remaining power, and the
LED lamp will display the current power successively, for example:
If the current battery charge is 75%, the three leds will light up in
turn.Light the LED from left to right, LED1 to LED2 to LED3, then show all
3 leds lit for 5 seconds.Next, all leds will turn off in turn, from right to left,
from LED3 to LED2 to LED1, and then all leds will turn off.
3) Charging and releasing: According to charging display, wireless support
fast charging.And priority mobile phone charging.
4) Button function description: Press the button to start output and query
the power, and light up the LED according to the current power
successively. The wireless charging indicator blue LED lights up (the
wireless charging indicator blue LED lights up only after the power is
turned on, if you click the button during the standby period, the wireless
charging indicator blue LED lights up).After 5 seconds, turn off the
LED.Automatic shutdown after 3 minutes.Double click the button to shut
down.
LEDstate
Percentage of capacity
All four lights were on（5s after go out） 75％-100%
LED1,LED2,LED3light（5s after go out）
50%-75%
LED1,LED2light（5s after go out） 25%-50%
LED1light（5s after go out） 5％-25%
LED1flash ﹤5％
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:(1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
FCC RF exposure statement:
This device complies with FCC Radiation exposure limit set
forth for uncontrolled environment. This device should be
installed and operated with a minimum distance 20cm
between the device and your body.
FCC ID: 2A29D-PS-ELTMAG-50
ELITE | MAG
Compatible for iPhone
WIRELESS POCKET CHARGER
User’s Manual