Phonak Naída V TM (V90/V70/V50/V30) User Guide
This user guide is valid for: Wireless models Phonak Naída V90-RIC Phonak Naída V90-SP Phonak Naída V90-UP Phonak Naída V70-RIC Phonak Naída V70-SP Phonak Naída V70-UP Phonak Naída V50-RIC Phonak Naída V50-SP Phonak Naída V50-UP Phonak Naída V30-RIC Phonak Naída V30-SP Phonak Naída V30-UP CE mark applied 2016 2016 2016 2016 2016 2016 2016 2016 2016 2016 2016 2016
Your hearing aid details If no box is checked and you do not know the model of your hearing aid, please ask your hearing care professional.
Your hearing aids have been developed by Phonak – the world leader in hearing solutions based in Zurich, Switzerland. These premium products are the result of decades of research and expertise and are designed to keep you connected to the beauty of sound! We thank you for making such a great choice and wish you many years of listening pleasure. Please read the user guide carefully to make sure that you understand and get the best out of your hearing aids.
Contents Your hearing aid 1. Quick guide 2. Parts of the hearing aid Using the hearing aid 3. Left & right hearing aid markings 4. On/Off 5. Batteries 6. Putting on the hearing aid 7. Removing the hearing aid 8. Push button 9. Volume control 10. Roger for conversation in noise and over distance 11. Use of Roger receivers Further Information 12. Join our hearing loss community! 13. A solution beyond your hearing aid 14. Care and maintenance 15. Service and warranty 16. Compliance information 17.
1. Quick guide Left & right hearing aid markings Blue marking for left hearing aid. Red marking for right hearing aid. Changing batteries Naída V-SP, V-UP Naída V-RIC 1 2 Remove the Open the sticker from the battery door. new battery and wait two minutes. 6 3 Place battery in the battery door with the “+” symbol facing upwards.
On/Off On Off Push button The push button on your hearing aid can have various functions. Volume control To increase the volume, press the volume control upwards. To decrease the volume, press the volume control downwards.
2. Parts of the hearing aid The pictures below show the models described in this user guide. You can identify your personal model by: • Checking “Your hearing aid details” on page 3. • Or comparing your hearing aid with the following shown models. Pay attention to the shape of the hearing aid and if a volume control is present.
Naida V-RIC Push button Tube Volume control Anchor (optional) Battery door Speaker (without earpiece attached) Naída V-SP & V-UP Hook / sound output Push button Volume control Battery door Classic earmold (detachable) 9
3. Left & right hearing aid markings There is a red or blue marking to tell you if it is a left or a right hearing aid. Blue marking for left hearing aid. Red marking for right hearing aid.
4. On/Off The battery door is also the on/off switch. 1 Closed battery door = hearing aid is on 2 Open battery door = hearing aid is off When you switch on the hearing aid you may hear a start-up melody.
5. Batteries Naída V-SP, UP Naída V-RIC 1 2 Open the Remove the sticker from the battery door. new battery and wait two minutes. 3 Place battery in the battery door with the “+” symbol facing upwards. If it is difficult to close the battery door: Check that the battery is inserted correctly and the “+” symbol is facing upwards. If the battery is not inserted correctly, the hearing aid will not work and the battery door can be damaged.
Low power: You will hear two beeps when the battery is low. You will have approximately 30 minutes to change the battery (this can vary, depending on the hearing aid settings and battery). We recommend that you always have a new battery on hand. Replacement battery This hearing aid requires zinc-air batteries. Identify the correct battery size (13 or 675) by: • Checking “Your hearing aid details” on page 3. • Checking the marking on the inner side of the battery door. • Checking the following table.
6. Putting on the hearing aid 6.1 Putting on the hearing aid with classic earmold 1 Take the earmold up to your ear and place the ear canal part into your ear canal. 2 Place the hearing aid behind your ear. 3 Insert the upper part of the earmold into the upper part of the bowl of your ear.
6.2 Putting on the hearing aid with dome, SlimTip or cShell 1 Place the hearing aid behind your ear. 2 Insert the earpiece into your ear canal. 3 If there is an anchor attached to the earpiece, tuck it into the bowl of your ear to secure your hearing aid.
7. Removing the hearing aid 7.1 Removing the hearing aid with classic earmold 1 Lift the hearing aid above the upper part of your ear. 2 Grasp the earmold with your fingers and gently remove it. Please try to avoid gripping the tube to remove the hearing aid.
7.2 Removing the hearing aid with dome, SlimTip or cShell 1 Gently pull on the bend of the tube and remove the hearing aid from behind the ear. In very rare cases, your earpiece can remain in your ear canal when removing the hearing aid from the ear. In the unlikely case that the earpiece does get stuck in your ear canal, it is strongly recommended to see a medical specialist for safe removal.
8. Push button The push button on your hearing aid can have various functions or is not active. This depends on the programming of the hearing aid which is indicated in your individual “Hearing aid instructions”. Please ask your hearing care professional for this printout.
9. Volume control To increase the volume, press the volume control upwards. To decrease the volume, press the volume control downwards. The volume control can be disabled by the hearing care professional.
10. Roger for conversation in noise and over distance Are you often in situations where the noise level is high or the distance to the speaker/talker is more than 1.
Hearing aid with Roger receiver Roger microphone Listener Speaker The Roger microphone transmits the speaker’s voice directly into your ears. The system consists of three main elements: your hearing aids, Roger receivers and the Roger microphone. Ask your hearing care professional for a Roger demo and more information.
11. Use of Roger receivers 11.1 Design-integrated Roger receivers Your Phonak Naída V hearing aids can be equipped with design-integrated Roger receivers. With the design-integrated receiver attached, the hearing aid offers all functionalities and usability as without the receiver. The hearing aid with the design-integrated receiver is water resistant, refer to chapter 14. Hearing aid Design-integrated receiver Your hearing care professional has already prepared your hearing aid for use with Roger.
11.2 Audio shoe and Roger X receiver Hearing aid Audio shoe (removable part) Battery door Roger X receiver (removable part) With the audio shoe and Roger X receiver attached, the hearing aid offers the same functionalities and usability as without the receiver with one important exclusion: Your hearing aid with the audio shoe is no longer water resistant.
Attach the audio shoe 1 Push the audio shoe towards the bottom of the hearing aid. Match the grooves of both parts. 2 Push until it snaps into place and is properly attached to the hearing aid. A Roger X receiver can now be attached.
Attach the Roger X receiver 1 Push the three pins of the Roger X receiver into the three sockets of the audio shoe. The Roger X receiver is correctly attached when it is clicked into place. Please refer to the specific receiver user instruction for further information. To hear immediately the Roger microphone signal when required, Phonak recommends to leave the Roger X receiver attached when not in use.
Remove the audio shoe 1 Take the hearing aid between thumb and forefinger. Pull the locking system on the audio shoe back. 2 Pull the audio shoe upwards with the other hand. The audio shoe is now removed from the hearing aid.
12. Join our hearing loss community! On HearingLikeMe.com you will find: • Living with Hearing Loss A set of interesting articles on how to live with hearing loss. • Forum A forum to meet and engage with a growing number of people who face the same challenges. • Blog A blog to keep up to date with the latest news on anything hearing.
13. A solution beyond your hearing aid As your hearing loss progresses, a hearing aid may no longer be the right solution for you. If you struggle to understand speech or talk on the phone, it may be time to consider an Advanced Bionics (AB) cochlear implant for the next step in your journey to hearing. With today’s advancements in hearing technology, an increasing number of people with significant hearing loss are enjoying restored hearing with cochlear implants.
that truly enrich life – the sweet songs of nature, shared laughter among friends, the many dimensions of music, and much more. AB and Phonak are sister companies that work together to help people with significant hearing loss. The Naída CI sound processor from Advanced Bionics provides unique, groundbreaking features that help recipients hear better in any environment.
For more information on Naída CI and AB cochlear implant technology, please visit AdvancedBionics.
14. Care and maintenance Diligent and routine care of your hearing aid contributes to outstanding performance and a long service life. Please use the following specifications as a guideline. For further information regarding product safety, see chapter 19.2. General information Before using hair spray or applying cosmetics, you should remove your hearing aid from your ear, because these products may damage it.
Your hearing aids are resistant to water, sweat and dust under the following conditions: • The battery door is fully closed. Ensure that no foreign object such as hair is caught in the battery door when it is closed. • After exposure to water, sweat or dust, the hearing aid is cleaned and dried. • The hearing aid is used and maintained as described in this user guide. Hearing aids with the design-integrated Roger receiver are also water resistant.
Daily Inspect the earpiece and tube for earwax and moisture deposits. Clean the surfaces with a lint-free cloth or use the small brush provided in the hearing aid hard case. Never use cleaning agents such as household detergents, soap, etc. for cleaning your hearing aid. It is not recommended to rinse these parts with water, risk for lodging in the tube. If you need to clean your hearing aid intensively, ask your hearing care professional for advice and information on filters or drying capsules.
15. Service and warranty Local warranty Please ask the hearing care professional, where you purchased your hearing aid, about the terms of the local warranty. International warranty Phonak offers a one year limited international warranty, valid starting from the date of purchase. This limited warranty covers manufacturing and material defects in the hearing aid itself, but not accessories such as batteries, tubes, earmolds and external receivers.
Warranty limitation This warranty does not cover damage from improper handling or care, exposure to chemicals or undue stress. Damage caused by third parties or non-authorized service centers renders the warranty null and void. This warranty does not include any services performed by a hearing care professional in their office.
16. Compliance information Europe: Declaration of Conformity Hereby Phonak AG declares that this Phonak product meets the requirements of the Medical Devices Directive 93/42/EEC as well as the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC. The full text of the Declaration of Conformity can be obtained from the manufacturer or the local Phonak representative whose address can be taken from the list on www.phonak.com (Phonak worldwide locations).
The wireless models listed on page 2 are certified under: Phonak Naída V-SP (V90/V70/V50/V30) USA FCC ID: KWC-BTEVSP Canada IC: 2262A-BTEVSP Phonak Naída V-UP (V90/V70/V50/V30) USA FCC ID: KWC-BTEVUP Canada IC: 2262A-BTEVUP Phonak Naída V-RIC (V90/V70/V50/V30) USA FCC ID: KWC-WHSRIC4 Canada IC: 2262A-WHSRIC4 37
Notice 1: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Notice 2: Changes or modifications made to this device not expressly approved by Phonak may void the FCC authorization to operate this device.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver.
17. Information and description of symbols With the CE symbol, Phonak AG confirms that this Phonak product – including accessories – meets the requirements of the Medical Devices Directive 93/42/EEC as well as the R&TTE Directive 1999/5/EC on radio and telecommunications equipment. The numbers after the CE symbol correspond to the code of certified institutions that were consulted under the above-mentioned directives.
This symbol indicates that it is important for the user to read and take into account the relevant information in these user guides. This symbol indicates that it is important for the user to pay attention to the relevant warning notices in these user guides. Important information for handling and product safety. During transportation keep dry.
Operating conditions The product is designed such that it functions without problems or restrictions if used as intended, unless otherwise noted in these user guides. The hearing aids are classified IP68 (depth of 1 meter for 60 minutes) and designed to be used in all daily life situations. Therefore you do not have to worry about getting the hearing aids exposed to a rain shower or sweat.
Temperature during transportation and storage: –20° to +60° Celsius (–4° to +140° Fahrenheit). Humidity during transportation: Up to 90% (non condensing). Humidity during storage: 0% to 70%, if not in use. See instruction in chapter 19.2 regarding drying the hearing aid after use. Atmospheric pressure: 200 hPA to 1500 hPa The symbol with the crossed-out garbage bin is to make you aware that this hearing aid may not be thrown away as normal household waste.
18.
What to do Change battery (chapter 1 + 5) Clean speaker opening/earpiece Insert battery correctly (chapter 1 + 5) Switch hearing aid on by completely closing the battery door (chapter 4) Insert hearing aid correctly (chapter 6) Contact your ENT/GP or hearing care professional Decrease volume (chapter 8 + 9) Change battery (chapter 1 + 5) Clean speaker opening/earpiece Turn volume up if volume control available (chapter 8 + 9) Contact your hearing care professional Change battery within the next 30 minutes (
19. Important safety information Please read the information on the following pages before using your hearing aid. A hearing aid will not restore normal hearing and will not prevent or improve a hearing impairment resulting from organic conditions. Infrequent use of a hearing aid does not permit a user to attain full benefit from it. The use of a hearing aid is only part of hearing habilitation and may need to be supplemented by auditory training and instruction in lipreading.
19.1 Hazard warnings The intended use of hearing aids is to amplify and transmit sound to the ears and hereby compensate for impaired hearing. The hearing aids (specially programmed for each hearing loss) must only be used by the intended person. They should not be used by any other person as they could damage hearing. Changes or modifications to the hearing aid that were not explicitly approved by Phonak are not permitted. Such changes may damage your ear or the hearing aid.
If you feel pain in or behind your ear, if it is inflamed or if skin irritation and accelerated accumulations of earwax occur, please check with your hearing care professional or physician. In very rare cases, the dome can remain in your ear canal when removing the hearing tube from the ear. In the unlikely case that the dome does get stuck in your ear canal, it is strongly recommended to see a physician for safe removal. Hearing programs in the directional microphone mode reduce background noises.
etc. That could cause injuries on your body (electric shock). The following is only applicable for persons with active implantable medical devices (i.e. pacemakers, defibrillators, etc.): Keep the wireless hearing aid at least 15 cm (6 inches) away from the active implant. If you experience any interference, do not use the wireless hearing aids and contact the manufacturer of the active implant.
19.2 Information on product safety Phonak hearing aids are water resistant and not waterproof. They are designed to withstand normal activities and occasional accidental exposure to extreme conditions. Never immerse your hearing aid in water! Phonak hearing aids are not specifically designed for extended periods of water submersion on a continual basis, that is worn in activities such as swimming or bathing.
The dome should be changed every three months or when it becomes stiff or brittle. This is to prevent the dome from detaching from the tube spout during insertion into or removal from the ear. When you are not using your hearing aid, leave the battery door open so that any moisture can evaporate. Make sure that you always completely dry your hearing aid after use. Store the hearing aid in a safe, dry and clean place. Do not drop your hearing aid! Dropping onto a hard surface can damage your hearing aid.
The batteries used in these hearing aids should not exceed 1.5 Volts. Please do not use silver-zinc or Li-ion (lithium-ion) rechargeable batteries as these may cause severe damage to your hearing aids. The table in chapter 5 explains exactly which type of battery your particular hearing aids require. Remove the battery if you are not using your hearing aid for a long period of time.
Do not use your hearing aid in areas where electronic equipment is prohibited.
Notes
www.phonak.com Your hearing care professional: 029-1095-02/V1.
