Datasheet

ManualsBrandsPHOENIX CONTACT ManualsRaspberry PiRaspberry Pi® bus connector Black Raspberry Pi®

107161_en_00

RPI-BC 107,6 DEV-KIT KMGY

Data sheet

1 Description

The RPI-BC housing system is designed to accommodate a

Raspberry Pi computer. The housing can be used with

Raspberry Pi models A+, B+, B2, and B3. Further PCBs can

also be inserted in the housing in addition to the Raspberry

Pi board.

Integration in distributor housing is possible since the RPI-

BC housing system complies with DIN 43880. The housing

can be mounted on a TS 35 DIN rail or on a wall.

The RPI-BC housing system consists of a special BC

housing (overall width 107.6) and a PCB holder for

mounting the Raspberry Pi board.

The HBUS DIN rail connector can be used to connect

together several RPI-BC housings or other BC housings.

This housing can be combined with the BC DEV-KIT to

create an I/O system (BC 107,6 DEV-KIT KMGY, 2202525).

The BC DEV-KIT is a set comprising BC housing and PCB

terminal blocks. An appropriate perfboard is also available

for the BC DEV-KIT.

Table of contents

1 Description ..................................................................1

2 Ordering data...............................................................2

3 Technical data .............................................................3

4 Overview of the housing system ..................................4

5 Dimensions..................................................................5

5.1 PCB dimensions of additional PCBs....................5

5.2 Dimensions of upper housing part .......................7

5.3 Installation example .............................................8

5.4 Dimensions of PCB holder...................................9

5.5 Dimensions of adapter.........................................9

5.6 Dimensions of DIN rail connector.......................10

6 Mounting the RPI-BC housing with Raspberry Pi.......11

Make sure you always use the latest documentation.

It can be downloaded at

phoenixcontact.net/products.

This document is valid for all products listed in “Ordering data” on page 2.

RPI-BC housing system

Summary of content (13 pages)

PAGE 1
RPI-BC 107,6 DEV-KIT KMGY RPI-BC housing system Data sheet 107161_en_00 1 © PHOENIX CONTACT 2016-04-15 Description Table of contents The RPI-BC housing system is designed to accommodate a Raspberry Pi computer. The housing can be used with Raspberry Pi models A+, B+, B2, and B3. Further PCBs can also be inserted in the housing in addition to the Raspberry Pi board. 1 Description ..................................................................1 2 Ordering data......................................
PAGE 2
RPI-BC 107,6 DEV-KIT KMGY 2 Ordering data RPI-BC housing system Description RPI-BC housing system, lower housing part including base latch, upper housing part, housing cover (permanently snapped onto the upper housing part), and PCB holder for mounting the Raspberry Pi board, color: light gray Type Order No. Pcs./Pkt. RPI-BC 107,6 DEV-KIT KMGY 2202874 1 RPI-BC housing system, individual parts Description Type Order No. Pcs./Pkt.
PAGE 3
RPI-BC 107,6 DEV-KIT KMGY 3 Technical data RPI-BC housing system Mounting NS 35 DIN rail or wall mounting Temperature range -40°C ... +105°C Degree of protection according to DIN EN 60529 IP20 Dimensions, W x H x D 107.6 mm x 89.7 mm x 62.2 mm PCB, maximum usable area Raspberry Pi board, plus 8200 mm² Power dissipation PV at 20°C in the horizontal mounting position, aligned without spacing 13.
PAGE 4
RPI-BC 107,6 DEV-KIT KMGY 4 Overview of the housing system 1 2 3 4 5 6 7 8 9 Figure 1 1 2 3 4 5 6 7 8 9 RPI-BC housing system Housing cover Upper housing part Perfboard (optional), RPI-BC EXT-PCB HBUS SET Perfboard (optional), RPI-BC INT-PCB SET Raspberry Pi board (not supplied as standard) PCB holder Lower housing part including base latch DIN rail connector (optional) Base latch 107161_en_00 PHOENIX CONTACT 4 / 13
PAGE 5
RPI-BC 107,6 DEV-KIT KMGY 5 Dimensions 5.1 PCB dimensions of additional PCBs PCB for DIN rail connector TOP 85 1 38,5 Figure 2 Dimensions of PCB RPI-BC EXT-PCB HBUS SET, 2202995 1 PCB thickness Perforated grid Drill hole 107161_en_00 Connection area for the pin strip for connecting the DIN rail connector (PSTD 0,65X0,65/18-3IS-2,54, 2202993) 1.6 mm ±0.2 mm 2.
PAGE 6
RPI-BC 107,6 DEV-KIT KMGY PCB for the GPIO connection 1 2 85 TOP 59 Figure 3 Dimensions of PCB RPI-BC INT-PCB SET, 2202994 1 2 PCB thickness Perforated grid Drill hole 107161_en_00 Connection area for the pin strip for the GPIO connection (PSTD 0,65X0,65/40-2,54, 2202992) Connection area for the header for (PTSM 0,5/ 4-HH-2,5-THR WH R32, 1814867) 1.6 mm ±0.2 mm 2.
PAGE 7
RPI-BC 107,6 DEV-KIT KMGY 5.
PAGE 8
RPI-BC 107,6 DEV-KIT KMGY 5.
PAGE 9
RPI-BC 107,6 DEV-KIT KMGY 5.4 Dimensions of PCB holder 11 8 89,7 58 Figure 6 5.
PAGE 10
RPI-BC 107,6 DEV-KIT KMGY 5.6 Dimensions of DIN rail connector a 6 4,7 3,2 7,6 1 1 EN 50022, NS 35 x 7,5 Figure 8 Dimensions of HBUS DIN rail connector and NS 35 DIN rail Dimensions for a BC 107,6 UT HBUS BK 2 4 1 3 6 5 8 7 10 9 12 11 14 13 16 15 37,1 2 1 4 3 5 6 7 8 10 9 12 11 14 13 15a15b 107.
PAGE 11
RPI-BC 107,6 DEV-KIT KMGY 6 Mounting the RPI-BC housing with Raspberry Pi All parts latch together by hand. No tools are required. • • • • Place the upper housing part with the cover side on the work surface. The removable fin is labeled in the upper housing part. The fin can be removed if necessary. If you are using additional PCBs, insert them into the upper housing part with the long side first. Insert the PCBs on the housing panel side first and then pull them down.
PAGE 12
RPI-BC 107,6 DEV-KIT KMGY • • Fit the PCB holders provided onto the Raspberry Pi. Make sure that the arrow on the PCB holder is pointing in the direction of the SD card slot. Insert the plastic catches in the holes provided on the Raspberry Pi. • Push the Raspberry Pi into the housing with a slight rotary motion. Insert the Raspberry Pi so that its interfaces fit in the corresponding openings in the housing. Push down the Raspberry Pi until the PCB holders snap into the housing.
PAGE 13
RPI-BC 107,6 DEV-KIT KMGY • • • Note the orientation of the housing parts. The lower housing part has an opening for the DIN rail connector, which should be on the side of the upper housing part that does not hold the Raspberry Pi. During insertion, ensure that the pin strip is not damaged by the DIN rail connector. Place the lower housing part on the upper housing part. The upper part slides on guides. NOTE: You can no longer remove the cover after installation.