Datasheet

ManualsBrandsPhoenix Contact ManualsConnectorsTerminal block Push-In, 0.14...4 mm² 400 VAC/VDC 24 A Grey

https://www.phoenixcontact.com/hq/products/3213943

01/25/2017Page1/19

Installation ground terminal block-PTI 2,5-PE/LO/NO-3213943

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Installation ground terminal block, Push-in connection, Cross section: 0.14 mm²-4 mm², AWG:26-12,

Width:5.2 mm, Color:gray, Mounting type:NS 35/7,5,NS 35/15

Why buy this product

Double function shafts on all levels

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4046356873017

Custom tariff number 85369010

Technical data

General

Note

Assembly instructions:

For secure fastening of the neutral busbar, supports must be set at

the beginning and end of each terminal strip as well as every 20cm on

longer terminal strips.

Number of levels 3

Number of connections 5

Potentials 3

Nominal cross section 4 mm²

Color gray

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 4 kV

6 kV

Degree of pollution 3

Overvoltage category III

Summary of content (19 pages)

PAGE 1
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Installation ground terminal block, Push-in connection, Cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, Width: 5.
PAGE 2
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Technical data General Insulating material group I Maximum load current 30 A (with 4 mm² conductor cross section and 3-pos.
PAGE 3
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Technical data General Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.964 (m/s ) /Hz Acceleration 0.
PAGE 4
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Technical data Connection data Note Please observe the current carrying capacity of the DIN rails. Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max.
PAGE 5
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Approvals Ex Approvals Approval details UL Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B D mm²/AWG/kcmil 26-12 26-12 Nominal current IN 20 A 10 A Nominal voltage UN 300 V 300 V cUL Recognized  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.
PAGE 6
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.
PAGE 7
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.
PAGE 8
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35) DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35) DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.
PAGE 9
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.
PAGE 10
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray End cover End cover - D-PTI/3 - 3213975 End cover, Length: 101 mm, Width: 2.2 mm, Height: 48.
PAGE 11
https://www.phoenixcontact.
PAGE 12
https://www.phoenixcontact.
PAGE 13
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 9 mm, Number of positions: 2, Color: red Plug-in bridge - FBS 3-5 - 3030174 Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 14.2 mm, Number of positions: 3, Color: red Plug-in bridge - FBS 4-5 - 3030187 Plug-in bridge, Pitch: 5.2 mm, Length: 22.7 mm, Width: 19.
PAGE 14
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Plug-in bridge - FBS 20-5 - 3030226 Plug-in bridge, Pitch: 5.2 mm, Number of positions: 20, Color: red Plug-in bridge - FBS 50-5 - 3038930 Plug-in bridge, Pitch: 5.2 mm, Number of positions: 50, Color: red Plug-in bridge - FBSR 2-5 - 3033702 Plug-in bridge, Pitch: 5.2 mm, Number of positions: 2, Color: red Plug-in bridge - FBSR 3-5 - 3001591 Plug-in bridge, Pitch: 5.
PAGE 15
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Plug-in bridge - FBSR 5-5 - 3001593 Plug-in bridge, Pitch: 5.2 mm, Number of positions: 5, Color: red Plug-in bridge - FBSR 10-5 - 3033710 Plug-in bridge, Pitch: 5.
PAGE 16
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 100, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.
PAGE 17
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174 PEN conductor busbar, 3mm x 10 mm, length: 1000 mm Partition plate Partition plate - ATP-PTI/3 - 3213990 Partition plate, Length: 103 mm, Width: 2.2 mm, Height: 49.3 mm, Color: gray Spacer plate - DP PS-5 - 3036725 Spacer plate, Length: 22.4 mm, Width: 5.
PAGE 18
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Screwdriver - ST-BW - 1207608 Actuation tool, for all 2.5 mm² - 4.
PAGE 19
https://www.phoenixcontact.com/hq/products/3213943 Installation ground terminal block - PTI 2,5-PE/LO/NO - 3213943 Accessories Marker for terminal blocks - UCT-TMF 5 - 0828744 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into flat marker groove, for terminal block width: 5.2 mm, Lettering field: 4.4 x 4.