Datasheet

ManualsBrandsPhoenix Contact ManualsAutomationTemperature Transducer

https://www.phoenixcontact.com/us/products/2902851

04/20/2016Page1/6

Thermocouple measuring transducer-MINI MCR-TC-UI-NC-2902851

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Configurable temperature transducer for the connection of thermocouples. Can be configured via DIP switches

or, with extended functionality, using the software. Screw connection, standard configuration.

Product Description

The configurable temperature transducer with 3-way isolation is suitable for the connection of thermocouples.

The measured values are converted into a linear current or voltage signal.

You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP

switches (see configuration table). The measuring transducer supports fault monitoring.

Key Commercial Data

Packing unit 1 pc

Weight per Piece (excluding packing) 100.0 g

Custom tariff number 85437090

Country of origin Germany

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Width 6.2 mm

Height 93.1 mm

Depth 102.5 mm

Ambient conditions

Ambient temperature (operation) -20 °C ... 65 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Summary of content (6 pages)

PAGE 1
https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Configurable temperature transducer for the connection of thermocouples.
PAGE 2
https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Technical data Ambient conditions Degree of protection IP20 Input data Configurable/programmable Yes Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L Temperature measuring range -250 °C ...
PAGE 3
https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Technical data Connection data Conductor cross section flexible max. 2.5 mm² Stripping length 12 mm Screw thread M3 General Transmission error thermocouples 0.1 % * 600 K / set measuring range; 0.1 % > 600 K (E, J, K, N, T, L, U, M Gost, L Gost) 0.2 % * 600 K / set measuring range; 0.2 % > 600 K (B, R, S, A1, A2, A3) 0.2% * 600 K / set measuring range; 0.
PAGE 4
https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Technical data Standards and Regulations Standards/regulations EN 61000-4-3 EN 61000-4-4 Designation Conducted interferences Standards/regulations EN 61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Listed Class I, Div.
PAGE 5
https://www.phoenixcontact.
PAGE 6
https://www.phoenixcontact.com/us/products/2902851 Thermocouple measuring transducer - MINI MCR-TC-UI-NC - 2902851 Block diagram OUT IN Sensor / Field Pictogram PLC / DCS S-Port 1 OUT U,I + 1 5 + 5 active TC 2 passive GND 1 – 2 6 – +24V 3 6 7 + IN 4 GND 2 GND 2 U,I OUT 8 – FM FM POWER +24V Zone 2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.