Datasheet
https://www.phoenixcontact.com/gb/products/2866527
06/18/2019Page1/6
Redundancy module-TRIO-DIODE/48DC/2X10/1X20-2866527
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Redundancy module with function monitoring, 48 V DC, 2x 10 A, 1x 20 A
Product Description
TRIO DIODE is the DIN-rail mountable redundancy module from the TRIO POWER product range.
Using the redundancy module, it is possible for two power supply units of the same type connected in parallel on the output side to increase
performance or for redundancy to be 100 % isolated from one another.
Redundant systems are used in systems that place particularly high demands on operational reliability. The connected power supply units must
be large enough that the total current requirements of all loads can be met by one power supply unit. The redundant structure of the power supply
therefore ensures long-term, permanent system availability.
In the event of an internal device fault or failure of the mains power supply on the primary side, the other device automatically takes over the entire
power supply of the loads without interruption. The floating signal contact and LED immediately indicate the loss of redundancy.
Your advantages
Save energy
Permanent monitoring of redundancy
Consistent redundancy up to the load
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356562973
Weight per Piece (excluding packing) 370.000 g
Custom tariff number 85049091
Country of origin China
Technical data
Dimensions
Width 32 mm
Height 130 mm
Depth 115 mm