Datasheet

https://www.phoenixcontact.com/us/produkte/2313931
Nov 14, 20131/8
Network isolator-FL ISOLATOR 100-RJ/RJ-2313931
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices
from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps.
Possible to connect two RJ45 plugs.

Product Features
No power supply required
Dielectric strength of up to 4 kV
Protection against aggressive environmental influences, particularly harsh industrial environments, thanks to coated PCB
Approval for railway applications (rolling stock) according to EN50155 and EN50121
Extended temperature range of -25°C to +85°C
Continuous insulation voltage of 250 VRMS
Electrical isolation of data cables and cable shielding
Mounting on EN DIN rails
  
Key commercial data
package_quantity
1
GTIN
4046356575089
Technical data
Dimensions
Width
22.5 mm
Height
99 mm
Depth
92 mm
Ambient conditions
Ambient temperature (operation)
-25 °C ... 75 °C
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (no condensation)
Permissible humidity (storage/transport)
5 % ... 95 % (no condensation)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20
Serial interface
Interface 1
Ethernet interface, 10/100BASE-T(X) in acc. with IEEE 802.3u
Interface
Ethernet