Brochure
With test connection
Ordering data
Type Order No. Pcs. / Pkt.
No. of pos. Dim. a
[mm]
5.0 mm pitch, color: green
2 5.00 FKC 2,5/ 2-ST
1910351 50
3 10.00 FKC 2,5/ 3-ST
1910364 50
4 15.00 FKC 2,5/ 4-ST
1910377 50
5 20.00 FKC 2,5/ 5-ST
1910380 50
6 25.00 FKC 2,5/ 6-ST
1910393 50
7 30.00 FKC 2,5/ 7-ST
1910403 50
8 35.00 FKC 2,5/ 8-ST
1910416 50
9 40.00 FKC 2,5/ 9-ST
1910429 50
10 45.00 FKC 2,5/10-ST
1910432 50
11 50.00 FKC 2,5/11-ST
1910445 50
12 55.00 FKC 2,5/12-ST
1910458 50
13 60.00 FKC 2,5/13-ST
1910461 50
14 65.00 FKC 2,5/14-ST
1910474 50
15 70.00 FKC 2,5/15-ST
1910487 50
16 75.00 FKC 2,5/16-ST
1910490 50
5.08 mm pitch, color: green
2 5.08 FKC 2,5/ 2-ST-5,08
1873058 50
3 10.16 FKC 2,5/ 3-ST-5,08
1873061 50
4 15.24 FKC 2,5/ 4-ST-5,08
1873074 50
5 20.32 FKC 2,5/ 5-ST-5,08
1873087 50
6 25.40 FKC 2,5/ 6-ST-5,08
1873090 50
7 30.48 FKC 2,5/ 7-ST-5,08
1873100 50
8 35.56 FKC 2,5/ 8-ST-5,08
1873113 50
9 40.64 FKC 2,5/ 9-ST-5,08
1873126 50
10 45.72 FKC 2,5/10-ST-5,08
1873139 50
11 50.80 FKC 2,5/11-ST-5,08
1873142 50
12 55.88 FKC 2,5/12-ST-5,08
1873155 50
13 60.96 FKC 2,5/13-ST-5,08
1873168 50
14 66.04 FKC 2,5/14-ST-5,08
1873171 50
15 71.12 FKC 2,5/15-ST-5,08
1873184 50
16 76.20 FKC 2,5/16-ST-5,08
1873197 50
248 PHOENIX CONTACT
! " # $
Notes:
In accordance with DIN EN 61984, COMBICON connectors have
no switching power. During designated use, they must not be
plugged in or disconnected when carrying voltage or under load.
COMBICON select
Possible combinations for plug-in connectors can be found in
COMBICON select at www.phoenixcontact.net/catalog or
starting on page 164.
The maximum torque for the screw flange is 0.3 Nm.
1
) Please observe the derating curves. Derating curves for other
possible combinations are available on request.
– Fast conductor connection thanks to
push-in spring-cage connection
– Can be combined with the MSTB 2,5
range
– Contacting of solid or stranded conduc-
tors with a ferrule without operating the
opening lever directly in the terminal
point
– Two test connections to accommodate
2 mm Ø test pins or 2.3 mm Ø test
plugs
– Versions with and without screw flange,
with self-locking flange, and with lock &
release levers
– For larger numbers of positions up to
24-pos., visit:
www.phoenixcontact.net/catalog
Derating curves, determined according to
DIN EN 61984 (VDE 0627):2002-09
Representation in accordance with DIN EN 60512-5-2:2003-01
Connected conductor cross section = 2.5 mm
2
Reduction factor = 0.8
Number of positions = See diagram
5
(5,08)
2,55
(2,85)
a
a+5,1
(a+5,7)
25,6
15
8,3
Connectors with push-in spring-cage
connection
Technical data
Technical data according to IEC/DIN VDE
Rated current / conductor cross section [A] / [mm²] 12
1
) / 2.5
Rated insulation voltage for pollution degree 2 [V] 320
Pitch [mm] 5 / 5.08
Connection capacity
Solid / stranded [mm²] / [mm²] / AWG 0.2 - 2.5 / 0.2 - 2.5 / 24 - 12
Stranded with ferrules without plastic sleeve [mm
2
] 0.25 - 2.5
Stranded with ferrules with plastic sleeve [mm
2
] 0.25 - 2.5
Multi-conductor connection capacity (two conductors with the same cross section)
Solid / stranded [mm
2
] - / -
Stranded with ferrules without plastic sleeve [mm
2
] -
Stranded with TWIN ferrule with plastic sleeve [mm
2
] 0.5 - 1.5
Insulation coordination
Surge voltage category / pollution degree III / 3 III / 2 II / 2
Rated insulation voltage [V] 250 320 630
Rated surge voltage [kV] 4 4 4
Approval data (UL/CUL) Use Group B C D
Nominal voltage [V] 250 - 300
Nominal current [A] 10 - 10
Connection capacity AWG AWG 26 - 12 - 26 - 12
Approval data (CSA) Use Group B C D
Nominal voltage [V] 300 - 300
Nominal current [A] 12 - 10
Connection capacity AWG AWG 24 - 12 - 24 - 12
General data
Stripping length [mm] 10
Type of insulation material / insulation material group PA / I
Inflammability class according to UL 94 V0
For all types Type Page
Marker cards
SK 5/3,8 or SK 5,08/3,8
842
Keying profile
CP-MSTB
Order No.
1734634
38
Strain relief
STZ ...-FKC-5,08
861
Ferrules with and without
plastic sleeve
858
Crimping pliers for 0.25
to 6 mm
2
CRIMPFOX 6
Order No.
1212034
Test plug
MPS
855
Accessories
Plug-in connectors for MCR technology - COMBICON control
CLASSIC COMBICON plug-in connectors with 5.0 or 5.08 mm pitch
Dimensional drawing Dimensional drawing Dimensional drawing Dimensional drawing
Note regarding derating curves Representative derating curves for the above connectors