Datasheet

https://www.phoenixcontact.com/us/products/1622038
May 3, 20171/7
Test accessories-EV-T2MBIE12-1ACDC-INFRA-1622038
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Special Vehicle Inlet for charging station tests, CCS type 2, Combined Charging System,
IEC62196-3, 125 A / 850 V (DC), 20 A / 250 V (AC), 12 V Locking actuator, Single wires, Length: 2
m
Article description
Special Vehicle Inlet for charging station tests, solely for laboratory tests, tests with charging stations (EVSE), and further analyses on
the infrastructure side - not for installation in any type of vehicle, cannot be used outside of the laboratory area 

Key commercial data
package_quantity
1
GTIN
4055626003856
Technical data
Product definition
Product type
Special Vehicle Inlet for charging station tests
Standards/regulations
IEC62196-3
Charging standard
CCS type 2
Charging standard
Combined Charging System
Charging mode
Mode 2, 3, 4
Type of charging current
DC, AC 1-phase
Note on connection method
Crimp connection, cannot be disconnected
Dimensions
Height
116 mm
Width
76 mm
Depth
94 mm
Bore dimensions
116 mm x 46 mm / 116 mm x 70 mm
Conductor length
2 m (AC cables)
Conductor length
2 m (DC cables)
Conductor length
0.5 m (Locking actuator cables)
Cable structure
2 x 35 mm² + 1 x 25 mm² + 2 x 2.5 mm² + 3 x 2 x 0.5 mm²
Type of conductor
Single wires
Ambient conditions
Ambient temperature (operation)
-30 °C ... 50 °C