TAUN102 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 3 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 3 4 4 4 5 5 5 5 Technical data 7 6 Notice 8 Notice of compliance 8 Disposal of your old product and battery 8 Trademar ks
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music. Other devices A mobile phone or device (e.g.
3 Get started Make sure that the headphones are fully charged and turned off. Charge your headphones Press and hold the on/off button, blue and red LED flashes alternately. Blue light flashes for successful pairing. The headphones remain in pairing mode for 5 minutes. Note Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage.
4 Use your headphones Connect the headphones to a Bluetooth device Turn on your mobile phone/Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED flashes. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Low battery level. Battery is fully charged. 6 EN The red LED flashes 2 times for every 3 seconds until it is out of power Red LED is off, and blue LED is on.
5 Technical data Music time: 7 hours Talk time: 6 hours Standby time: 150 hours Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (80 mAh) Bluetooth 5.
6 Notice Notice of compliance Notice for US The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Disposal of your old product and battery This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle. philips.com. This product contains non-removable batteries: Do not incinerate. Batteries may explode if overheated. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. Follow the steps described in this user manual.
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicas aplicados. Para maiores informações, consulte a site da ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.