Always there to help you Register your product and get support at www.philips.
1 Important Hearing Safety Electric-, Magnetic- and Electromagnetic Fields (EMF) General information Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks 2 Your bluetooth stereo headset Introduction What's in the box What else you'll need Compatibility Overview of your Bluetooth stereo headset 2 2 2 2 3 3 3 3 4 4 4 4 4 5 3 Get started 6 Charge the headset 6 Pair the headset with your mobile phone 6 4 Use the headset 7 Connect the headset to a mobile phon
1 Important Hearing Safety Danger •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
2 Your bluetooth stereo headset EN Quick start guide Philips Bluetooth stereo headset SHB7000/SHB7000WT Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
English Overview of your Bluetooth stereo headset a Mic b • Turn the headset on or off • Play/Pause/Pick up call/Hang up/Redial/ Reject call c Audio input jack d Volume/Track control e Charging slot EN 5
3 Get started Charge the headset Warning •• Before you use your headset for the first time, charge the battery for four hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• End a call before charging the headset, as connecting the headset for charging will power off the unit. Plug the headset into a powered USB port with an USB charging cable. »» LED turns white during charging and turns off when the headset is fully charged.
Connect the headset to a mobile phone 1 2 Turn on your mobile phone. Press and hold to turn the headset on. »» The blue LED flashes. »» The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip •• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone.
Wear your headset Adjust the headband for the best fit. Use with an audio cable With the supplied audio cable, you can use the headset with non-Bluetooth enabled devices or use the headset on airplane. No battery power is required when you use the headset with an audio cable. Caution •• Finish your call before connecting the audio cable, as this will switch off battery power and end an incoming call. Connect the supplied audio cable to • the headset and; • an external audio device.
• Up to 9 hours of play time or talk time • Up to 200 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-Polymer battery (200 mAh) • Bluetooth 3.
6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. • Charge the headset. The audio cable is connected to the headset. • Disconnect the audio cable. Fail to pair with a mobile phone. Bluetooth disabled. • Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset. Pairing does not work. The headset is not in pairing mode. • Follow the steps described in this user manual.
English Audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. The mobile phone may only support (mono) HSP/HFP but not support A2DP. • Refer to the user manual of the mobile phone for detailed information on compatibility. I hear but cannot control music on my device (e.g. skip forward/backward). The Bluetooth audio source does not support AVRCP. • Refer to the user manual of the audio source for detailed information on compatibility.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.