Register your product and get support at www.philips.
4.7.2 Disconnecting from a computer Table of contents 1 Important safety information 1.1 Safety instructions 2 About this user manual 2.2 Symbols used 3 Your recorder 3.1 Product highlights 3.2 Package contents 3.3 Product overviews 3.3.1 Front and rear sides 3.3.2 Keys 3.4 Start-up screen 3.4.1 Menu overview 4 First steps 4.1 Inserting the batteries 4.2 Power on/off 4.3 Initial installation process 4.3.1 Select language 4.3.2 Set date & time 4.4 Enabling/disabling the keypad lock 4.
8.1.8 Setting auto divide 8.1.9 Enable/disable the recording indicator 8.2 Display settings 8.2.1 Select language 8.2.2 Adjusting the display contrast 8.2.3 Adjusting the backlight 8.2.4 Setting demonstration mode 8.3 Device settings 8.3.1 Set date & time 8.3.2 Enabling/disabling ClearVoice 8.3.3 AUTO-OFF 8.3.4 Alarm clock 8.3.5 Enabling/disabling key and signal tones 9 Service 9.1 Service functions 9.1.1 Display device information 9.1.2 Memory formatting 9.2 Updating the firmware 9.
1.1.3 Hearing protection 1.1.5 Legal restrictions on recording Observe the following guidelines when using headphones: • Set the volume to a moderate level and do not use headphones to listen for excessively long periods of time. • Be particularly careful to avoid adjusting the volume to a level that your hearing cannot deal with. • Do not turn the volume up so high that you cannot hear what is going on around you.
3 Your recorder 3.2 Package contents a b c d e We are delighted that you have chosen a Philips device. Visit our website for comprehensive support such as user manuals, software downloads, warranty information and much more: www.philips.com/dictation. Device Quick start guide USB cable to connect to a computer Two AAA batteries DVT2710: DVD with speech recognition software Note 3.1 Product highlights • Please note that some individual components may not be included in delivery with your model.
3.3.2 Keys 3.
3.4.1 Menu overview 3.
4 First steps 2 Insert the batteries or rechargeable batteries into the device as shown. Make sure the polarity is correct. Use the installation guide on the following pages to start using your device quickly and easily. 4.2 Power on/off 4.3 Initial installation process 1 The initial installation process starts when first using the device or possibly if there has been a long interruption to the power supply. The date and time entered are saved with each recording as the recording time.
6 Press the record key g. 7 Press h / b to switch between the 12/24-hour system. 8 Press the record key g. The keypad lock deactivates all keys on the device. The timer function of the device continues to function. 9 Press h / b to set the hours. 1 4.4 Enabling/disabling the keypad lock 10 Press the record key g. 4.5 Insert microSD card Slide the HOLD switch up into the HOLD position to lock the keypad of the device. XX The display briefly shows On Hold and turns off.
1 Turn down the volume of the device before you plug in the headphones. 2 Insert the stereo jack into the headphone connection EAR on the side of the device. • A USB mass storage device: You can use the File Explorer to access the device data without installing additional software. It is automatically displayed as a mass storage device similarly to a USB memory stick or card. It is a convenient way to store, back up and and move files. (see also chapter 4.7.
5 Record The device offers many features that you can use during recording or to improve the quality of a recording. Use the timer and the voice activation functions to start recording automatically. 5.1 Creating a recording Before starting a recording, set the required recording quality and microphone sensitivity. 1 2 In stop mode (start-up screen), press a to select the desired folder for the recording.
6 Playback Tip • Turn on the ClearVoice function for better playback quality. Quiet fragments are dynamically adjusted, making soft voices clearer and more understandable (see also chapter 8.3.2 Enabling/disabling ClearVoice, page 35). 6.1 Select a recording 1 2 Press a to select the desired folder while the device is stopped. XX The following symbols will be displayed, depending on the selected location folder: u, v, w, x – internal memory, à, á, â, ã, ä – memory card displayed. 6.1.
7 6.5 Repeat a file / repeat a sequence You can automatically repeat playback of a certain file or entire folder (= endless loop). 1 In stop mode (start-up screen), press a/MENU for at least two seconds. 2 Press h / b to select the function Repeat. 3 Press the record key, g, to confirm. 4 Using either h / b, select whether you wish either the playback of an individual recording/file or a folder to repeat automatically.
7.1.2 Split a recording Split a large recording into two separate recordings so that it can be more easily archived or transferred via e-mail, or to delete a section of the recording. 1 8 7.2 Deleting recordings on the device You can delete individual recordings from the device. Connect the device to a computer if you want to rename or delete entire folders. In stop mode (start-up screen) select the folder in which you wish to divide a recording by pressing a.
5 Press h / b to select the required recording quality. XX The selected quality setting symbol is shown on the display. ‡ – highest quality, uncompressed, format: WAV, 1,411 kbit/s … – excellent quality, format: MP3, 192 kbit/s ƒ – high quality, format: MP3, 96 kbit/s ˆ – above-average recording time: Format: MP3, 64 kbit/s † – longer recording time, format: MP3, 8 kbit/s 6 Press the record key, g, to confirm. 7 Press the ~ key to exit the menu.
8.1.6 Setting the timer You can use this function to start a recording at a specified date and time. 1 In stop mode (start-up screen), press a/MENU for at least two seconds. 2 Press a to select the recording settings menu Ó. 3 Press h / b to select the function Timer. 4 Press the record key, g, to confirm. 5 Press h / b to select the function Set time, in order to set the time at which recording starts. 11 Press the record key, g, to confirm. XX If this feature is on, the À icon is displayed.
8.1.9 Enable/disable the recording indicator This function allows you to switch off the status LED. 1 In stop mode (start-up screen), press a/MENU for at least two seconds. 8.2 Display settings Press a to select the device settings menu ×. 3 Press h / b to select the function Record lamp. 4 Press the record key, g, to confirm. 5 Press h / b, to select whether you want to turn the status LED on or off. • Your language might not be available. Select an alternative one.
4 Press the record key, g, to confirm. 4 Press the record key, g, to confirm. 5 Press h / b to select the function On. 5 Press h / b to select the required year. 6 Press the record key, g, to confirm. XX If this feature is on, the saved images are output sequentially to the display. 6 Press the record key g. 7 Press h / b to set the required month. 7 Press the ~ key to end demonstration mode. 8 8 Press the ~ key to exit the menu.
8.3.4 Alarm clock 11 Press h / b to select the Off function, to turn off the alarm. You can use the device as an alarm clock or an appointment reminder. The alarm goes off or a selected file is played at a pre-set time. 1 In stop mode (start-up screen), press a/MENU for at least two seconds. 2 Press a to select the device settings menu ×. 3 Press h / b to select the function Alarm. 4 Tip • Press the ~ key to cancel the operation without saving and return to stop mode. 8.3.
Tip • Press the ~ key to cancel the operation without saving and return to stop mode. 9.2 Updating the firmware XX The firmware is automatically updated. This will only take a few minutes. The device will then switch off. Caution Problem • Wait until the firmware update is complete before calling up other device functions. Failure to properly update the firmware may result in the device malfunctioning. Your device is controlled by an internal program called firmware.
Technical data 10 Appendix The information in this user manual has been produced to the best of our knowledge. It (particularly the technical data) may be modified or updated at any time without prior notice.
˜ The conformity with the relevant EU directives is confirmed by the CE mark. Declaration of Conformity Speech Processing Solutions GmbH hereby declares that the devices DVT2510 and DVT2710 fully comply with the basic requirements and other relevant provisions of Directives 2006/95/EC, 2004/108/EC and 2009/125/EC. A complete Declaration of Conformity for this product is available at www.philips.com/dictation.
© 2014 Speech Processing Solutions GmbH. All rights reserved. Document Version 1.
