User's Manual

ManualsBrandsPhilips Lighting North America ManualsElectronicsOccuSwitch Wireless Dimmer

Features

Easy-to-install retrofit

Wireless controls means no sensor wiring needed eliminating

the need for ceiling mounted power packs

Attractive Decorator style matches building device standard

Self adaptive time delay tunes sensor to common activities in

the space.

Day Light configuration establishes the desire light level from

the floor without accessing he sensor.

Up to 16 devices can be linked together to control one space.

Multi-way groups - two or more dimmer can be linked to form

a group for multi-way operation

Several groups can be linked to the same set of sensors for

code compliant energy management.

Convenient dimmer based recalibration allows end-user to

recalibrate at any time without accessing the sensor

Advance Technologies

Processor based logic reduces false triggers to optimize energy

savings and helps extend lamp life.

White LED bar graphic clear indicates dimming level and pro-

vide visual indication for some features during set-up.

Maximum level (Task Tuning) can be set at the dimmer.

Manual ON / Auto OFF mode available to meet new energy

codes.

Manual dimming override set special light levels while the

room is occupied.

Universal voltage 120/277 volt

Meets Federal Energy Mandate (Title 24, ASHRAE 90.1 &

189.1, IECC)

OCCUSWITCH WIRELESS

LRD1730

Wall Dimmer with Wireless Communication

Job Information Device Type #:

Job Name:

Cat. No.:

Notes:

Ordering Information

WHITE IVORY Description

LRD173000 LRD173001

OccuSwitch Wireless Wall

Dimmer, 120/277 VAC

Description

Philips LRD1730 Wall Dimmer is part of the OccuSwitch Wireless family

of products that provide automatic lighting control for energy manage-

ment and user convenience. The wireless feature adapts well to retrofit

installation where pulling wires across existing ceilings is too expensive.

The OccuSwitch Wireless Wall Dimmer can be installed with the other

Day Light Regulation products to create a complete wireless lighting

control system for a single space. Up to 16 devices (switches, Dimmers,

Occupancy Sensors & Multi-Sensors), can be linked for manual and auto-

matic control of the lights.

LRD1730 Wall dimmer with wireless communications

Applications

Classrooms • Conference rooms • Offices • Restrooms (fan & lights)

Multimedia rooms • Lounges • Break Rooms • Storage areas, etc . . . .

Philips OccuSwitch

Wireless Control

System is a simple, easy, and effortless

way to create a more sustainable work

environment

Summary of content (2 pages)

PAGE 1
OCCUSWITCH WIRELESS LRD1730 Wall Dimmer with Wireless Communication Philips OccuSwitch Wireless Control System is a simple, easy, and effortless way to create a more sustainable work environment LRD1730 Wall dimmer with wireless communications Features Easy-to-install retrofit Wireless controls means no sensor wiring needed eliminating the need for ceiling mounted power packs Attractive Decorator style matches building device standard Self adaptive time delay tunes sensor to common activities in the spac
PAGE 2
OCCUSWITCH WIRELESS LRD1730 Wall Dimmer with wireless communications Technical Specification Wiring Diagram Operating Voltage: Universal - 120V AC or 277V AC, 60 Hz Load Rating: Electronic Fluorescent Ballast 120V / 800VA 277V / 1600VA Incandescent lamps 120V / 800W Motor load 120V / 0.25HP Compatible Ballasts: Philips Advance Mark 10 Powerline - All models EssentiaLine Powerline - All models Compatible Lamps: For best dimming performance use Philips Lamps Wireless Network Protocol: ZigBee Pro 2.