User's Manual

ManualsBrandsPhilips Lighting North America ManualsElectronicsWireless 902-928 MHz Outdoor Lighting Control

Starsense is a revolutionary telemanagement

system for monitoring, controlling, metering

and diagnosing outdoor lighting networks.

Starsense Wireless is based on two-way

wireless communication using the latest in

mesh network tecnology.

Helping to improve energy management as well as

related operating costs, the system enables individual

light points to be switched on or off at any given

time, continuously monitored for issues, and

programmed for unique event or seasonal activity

throughout the year. Moreover, the age and condition

of each lamp in the system can also be monitored,

and any failures will be reported by exact location.

This offers the opportunity to signiﬁcantly reduce

maintenance costs through maximized lamp life and

accurate scheduling of service calls. Starsense is

designed for use in residential, street, and road

lighting applications, including parking lots, ports,

train stations, and industrial complexes.

Beneﬁts and advantages

•

Help customers by detecting, reporting and

reducing lighting-related black-outs

• Enablethereductionofenergyconsumptionvia

the accurate control of light times

• Savemaintenance-relatedcoststhatareassociated

with lamp scouting and predictive maintenance

Philips remote monitoring

and control systems

StarsenseNEMAOLC(nodim)

Intelligent management for outdoor lighting

Summary of content (4 pages)

PAGE 1
Philips remote monitoring and control systems Starsense NEMA OLC (no dim) Intelligent management for outdoor lighting Starsense is a revolutionary telemanagement system for monitoring, controlling, metering and diagnosing outdoor lighting networks. Starsense Wireless is based on two-way wireless communication using the latest in mesh network tecnology.
PAGE 2
General Description The Starsense NEMA Intellivolt OLC (Outdoor Luminaire Controller) is a luminaire based device that monitors and controls a lamp/driver combination. Communication between the OLC and the system is based on radio frequency (RF) signals. The OLC controls the driver by switching and monitoring the mains. The OLC will monitor and store electrical characteristics from the lamp/driver system. The OLC is designed to work in combination with the Starsense Segment Controller (LFC7310).
PAGE 3
Outdoor Configuration Assistant (OCA) This device combines the barcode with the GPS coordinates of the location of the luminaire. Both inputs are important to build up the networked telemanagement system. To avoid reopening the luminaire after installation, it is advised to peel off a label from the OLC and place the label on an agreed location like a light plan drawing or the connection box at the bottom of the pole. This simplifies scanning of the barcode at a later stage.
PAGE 4
Technical Data Operating conditions Ambient temperature (ta) Relative humidity Max. housing temperature Lifetime Non-operating conditions Temperature Relative humidity Mains connection Mains voltage (LLC7310) Mains voltage (LLC7315) Mains frequency Max.