Philips Ele c t ronic s Singa pore Pt e Lt d User Manual Setup Procedures & Information For Used Of 2.4GHz RF Remote Control (RC1974503/00RF) & 2.
Philips Ele c t ronic s Singa pore Pt e Lt d Table of contents 1. FCC Statatement 2. Setup Procedures 3. Information For Used 3.1 General 3.2 Stuck key function 3.3 Sleep mode 3.4 Key press 3.
Philips Ele c t ronic s Singa pore Pt e Lt d 1. FCC Statement [Class B Device] FCC Compliance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Philips Ele c t ronic s Singa pore Pt e Lt d 2. Setup Procedures Setup Procedures of 2.4GHz RF Remote Control and 2.4GHz RF USB Receiver Plug into USB port USB port 2.4GHz RF USB Receiver Picture 1: USB port and 2.4GHz RF USB Receiver plug into USB port.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 2: 2.4GHz RF Remote control with packaging (front and rear side). Press the hook down and lift up the lid Picture 3: Remove the battery lid by pressed the hook down the battery lid and lift it up. Picture 4: Insert the batteries (AAA type) with correct polarity.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 5: Closed up the battery compartment with battery lid. Lift up the LCD display after release the catcher Press to right hand side to release the catcher Picture 6: Lift up the notebook LCD display by release the catcher. Picture 7: Press the switch to turn on the notebook.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 8: Process of loading Windows Vista. Picture 9: Close the application as above by click the “X” icon at upper right hand side as Picture 10. Picture 10: The “X” icon located at right hand side, upper corner.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 11: Using cursor to click the “Start” icon located at left hand side, lower corner. Picture 12: Select and click the “WordPad” application program.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 13: The “WordPad” application software. Picture 14: Press “Digit 5” and release the button on the 2.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 15: The WordPad display “5” for press and release button Digit 5 on 2.4GHz RF remote control. Picture 16: After testing, before shutdown the note book, close all the application software as click the “X” icon located at upper right hand corner and after that, click the icon “Don’t Save” to abort saving the file. Picture 17: Click the “Start” icon then select the “f” icon.
Philips Ele c t ronic s Singa pore Pt e Lt d Picture 18: Click the “Shut Down” icon Picture 19: Notebook shutting down.
Philips Ele c t ronic s Singa pore Pt e Lt d 3. Information For Used 2.4GHz RF Remote Control (RC1974503/00RF) & 2.
Philips Ele c t ronic s Singa pore Pt e Lt d 3.1 General This remote control is a 2.4GHz RF remote control (RC1974503/00RF) which will transmit RF protocol. It will work with 2.4GHz RF USB receiver (OVU700001/00RF). 3.2 Stuck key function Stuck key means a key or multiple key has been pressed for a very long time in normal operating mode. ( For multiple key press, refer to section 1.6.
Philips Ele c t ronic s Singa pore Pt e Lt d 3.4 Key press 3.4.1 Continuous key press When the key is press and held, the transmission will repeat at the timing described in 1.1.1.1 If more than 1 key is pressed, there will be no transmission 3.4.2 Multiple Key press Remote control will not react to multiple key press. No transmission will take place. Only the backlight LED will light up. 3.5 3.5.
Philips Ele c t ronic s Singa pore Pt e Lt d ¾ If it receives this pairing command, it will overwrite it’s own 24bit- ID with the new ID in this command. ¾ The USB receiver will acknowledge the successful operation to the remote control. ¾ After the acknowledgement is received by the remote control, it will overwrite it’s own ID with this ID as well, into the Eeprom. This new ID will remain in the Eeprom of both receiver and remote control.
