Manual of KWR101810/01B & OVU104015/01 Specifications are subject to change without notice
FCC Statement FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
KWR101810/01B – Remote Control This remote control offers the following major functions: • • • • • Free air absolute mouse pointer QWERTY keyboard 18 Normal keys to control modern Internet (configurable) Accelerometer data transfer to the host @ 60Hz Pick up – Wake up; Pickup activation of pointer Enabled Devices in the living room including Internet Enabled TV, STB, OTT, Living room PC, etc. via 2.
Product Features (remote control & dongle) 1.
1.3 RF Pairing The (re) pairing procedure is only needed to replace a defective item or when factor reset has been initiated. RF pairing is by proximity pairing method, which both the REMOTE CONTROL and receiver needs to be in RF Pairing mode and bring within 2 meters (Configurable distance) apart from the receiver. The Receiver pairing can be enabled by three methods: Press button, Plug in USB or via software controller.
1.6 RF Pairing Erase When a user needs to reset the pairing address back to the default address, a RF Pairing Erase can be done. When a RF Pairing Erase is completed, the REMOTE CONTROL will only work with an unpaired Receiver (also with default address). 1 Press and hold KEYBOARD keys “BACK” and “HOME” for 10 secs. 2 Release the key. REMOTE CONTROL will do a RF Pairing Erase. 3 Once the key is released the POWER LED is briefly off 1.