e-Manual Page 1 of 1
Product Information • Product Features • SmartImage Product Information • Technical Specifications • Resolution & Product Features Preset Modes • Philips Pixel 200P7 Defect Policy • Automatic ● Outstanding front of screen performance Power Saving ❍ SmartImage for the best LCD viewing experience ❍ UXGA, 1600x1200 resolution for sharper display • Physical ❍ VGA analog plus dual digital DVI plugs for input choice Specification ❍ Fast response time for better display of moving images • Pin ● Maximum comfort
Product Information How to enable SmartImage 1. Press to launch the SmartImage on screen display; 2. Keep press to toggle between Office Work, Internet, Image Viewing, Video Playback, Custom, and Off; 3. The SmartImage on screen display will remain on screen for 3 seconds or you can also press “OK“ to make confirmation. Expect using key to scroll down, you can also press and close the SmartImage OSD. buttons to choose and press “ok” to confirm selection There are six modes to be selected: 1.
Product Information 6. Off: No optimization by SmartImage. RETURN TO TOP OF THE PAGE Technical Specifications* LCD PANEL • Type TFT LCD • Screen size 20.1" / 51cm • Pixel Pitch 0.255 x 0.255mm • LCD Panel type 1600 x 1200pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated • Effective viewing area 408 x 306mm • Display Colors 8 bits interface (16M colors) SCANNING Vertical refresh rate 56Hz-85Hz Horizontal Frequency 30kHz-98kHz (Analog input) VIDEO • Video dot rate 202.
Product Information • Maximum 1600 x 1200 at 75Hz(analog input) 1600 x 1200 at 60Hz(digital input) • Recommended 1600 x 1200 at 60Hz * at DVI digital input 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 (IBM VGA 10h) 31.5 720*400 70 31.5 640*480 60 37.5 640*480 75 35.2 800*600 56 37.9 800*600 60 46.9 800*600 75 48.4 1024*768 60 60.0 1024*768 75 60 1280*960 60 69.0 1152*870 75 63.9 1280*1024 60 80.0 1280*1024 75 75.
Product Information RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 461 x 421 x 235 mm (incl. Pedestal) (in lowest position) • Weight 8.9 Kg • Tilt / Swivel -5° ~ 25° / ± 45° • Height adjustment rang 130 mm • Power supply 100— 240 VAC, 60 - 50 Hz • Power consumption 50 W* (typ.
Product Information 7 DDC Data 15 Ground (return for +5V and H/V-sync) 23 T.M.D.S. Clock+ 8 * Analog V-sync 16 Hot Plug Detect 24 T.M.D.S. Clock- 2. The 15-pin D-sub connector (male) of the signal cable: Pin Assignment No. Pin Assignment No. 1 Red video input 9 +5V 2 Green video input/SOG 10 Ground 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Cable detect 13 H. Sync / H+V 6 Red video ground 14 V.
Product Information Physical Function 1) Tilt 2) Swivel file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.
Product Information 3) Height adjustment 4) Portrait display file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.
Product Information file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.
Product Information RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.
Installing Your LCD Monitor Installing Your LCD Monitor Front View • Produt Description Setting Up Front View Product Description and • Connecting Your Monitor VESA • Standard Mounting Getting • Started Optimizing • Performance 1 To switch monitor's power On and Off 2 To access OSD menu 3 To adjust the OSD 4 To adjust brightness of the display 5 To adjust the OSD 6 7 AUTO Automatically adjust the horizontal position, vertical position, phase and clock settings.
Installing Your LCD Monitor RETURN TO TOP OF THE PAGE Rear View 1 AC power input 2 DVI-I input 3 D-Sub 4 Kensington anti-thief lock 5 USB upstream and downstream RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1600 x 1200 @60Hz Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION.
Installing Your LCD Monitor ● You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This is included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this program. More about FP_setup4.3.exe RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/200P7/english/200p7/install/install.
Regulatory Information - ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monitor) - ISO13406-2 (Ergonomic requirement for Flat Panel Display) - GS EK1-2000 (GS specification) - prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display) - MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields) - TCO'99, TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO vers
Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Regulatory Information Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.