Exhibit 3 Installstion and Operating Instructions Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 150MT2 z z z z z z z z z z z z 15-inch XGA LCD all-in-one Monitor TV with excellent display performance Multiple video input allowing display of PC, TV, HDTV (the US/Canada/Korea/Taiwan), VCD, DVD, Progressive DVD an
• Horizontal frequency 31kHz-63kHz PC VIDEO • Video dot rate 80 MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp • Sync input signal Separate sync • Sync polarities Positive and negative • Input Frequency XGA Hsync SVGA Hsync VGA Hsync • Video interface D-sub, S-Video, TV-RF, SCART (Europe) or composite and components video (others) 48- 63 kHz, Vsync 60 - 75 Hz (N.I.) 35- 50 kHz, Vsync 56 - 75 Hz (N.I.) 31- 38 kHz, Vsync 60 - 75 Hz (N.I.
• Maximum 1024 x 768 at 75Hz • Recommended 1024 x 768 at 60Hz 15 user definable modes 17 factory preset modes: Resolution Mode H. freq (kHz) V. freq (Hz) 640*350 VGA-1 31.469 70.086 640*480 VGA VESA 60 31.469 59.940 640*480 Mac 13 35.000 66.667 640*480 VGA VESA 75 37.500 75.000 720*400 IBM VGA 3H 31.468 70.087 800*600 SVGA VESA 56 35.156 56.250 800*600 SVGA VESA 60 37.879 60.317 800*600 SVGA VESA 75 46.875 75.000 832*624 Mac 16 49.724 74.
VESA Mode Video H-sync V-sync Power Used LED color ON Active Yes Yes 48W (typ.) Blue OFF Blanked No No < 2W Amber This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 392 x 374.1 x 167.8 mm (incl. Pedestal) • Weight 4.
Pin Assignment No. Pin Assignment No. 1 Red video input 9 DDC +5V 2 Green video input 10 Logic ground 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Ground 13 H. Sync 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components.
Installing your LCD Monitor/TV Front View Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc.
1. Headphone Jack 2.
(Europe) 1 DC 12V DC 12V power in 2 PC - Video D-Sub input 3 4 PC - Audio Progressive - Video PC Stereo input D-Sub input 5 Progressive - Audio Audio input 6 EXTERNAL/ EURO-AV SCART connection (for Europe only) 7 AV audio (L) AV audio (R) 8 S-VIDEO (L) S-VIDEO (R) Tuner adapter 9 75 TV Antenna or CATV cable in RETURN TO TOP OF THE PAGE (Americas and Asia Pacific) 1 DC 12V DC 12V power in 2 PC - Video D-Sub input 3 4 PC - Audio Progressive - Video PC Stereo input D-Sub input 5
6b 7 AV input AV audio (L) AV audio (R) 8 CVBS S-VIDEO (L) S-VIDEO (R) Tuner adapter 9 75 TV Antenna or CATV cable in RETURN TO TOP OF THE PAGE Optimizing Performance z For best performance, ensure that your display settings are set at 1024x768@60Hz (for 15") or 1280x1 60Hz (for 18"). Note: You can check the current display settings by pressing the 'MENU' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION.
Connecting to Your PC, TV Antenna, DVD/VCR etc. Front View Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Removing and Re-installing the Base • Basic Monitor TV Connections • Getting Started • Optimising Performance Accessory Pack Unpack all the parts.
TV/AV module Mini jack to RCA audio-in cable D-sub to YPbPr adapter cable Bracket Tuner adapter Security screw RETURN TO TOP OF THE PAGE Setting up and connecting your monitor/TV Ensure that the power to the monitor/TV is switched off before the installation.
(Americas and Asia Pacific) RETURN TO TOP OF THE PAGE - Connect to PC z z z z Connect the cables to the back of your computer by following step 1~6 If your monitor displays the computer image the installation has been completed successfully. If installation was not successful, see the Troubleshooting section. For installation of the monitor driver for Microsoft Windows, see the Monitor Driver Installation section (Getting Started).
RETURN TO TOP OF THE PAGE - Connect to DVD/VCD/VCR Connect to DVD/VCR/VCD through S-VIDEO z Connect to DVD/VCR/VCD through S-VIDEO
z Connect to DVD/VCR /VCD through SCART (for Europe) z Connect to DVD/VCR /VCD through composite video & S-video (for AP and Americas)
z Connect to DVD/VCR /VCD through component video (for AP and Americas) RETURN TO TOP OF THE PAGE
Regulatory Information TCO '99 Information • TCO Environmental Requirements • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S.
Energy Star Declaration PHILIPS 150MT2 This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC.
Exhibit 4 Brief Description of Circuit Functions 1. General Description This LCD monitor TV support analog PC VGA signal up to 1024X768 75HZ XGA mode for 15” model and 1280X1024 75Hz SXGA mode for 18” model. And it can also support TV, YC, CVBS or Y Cb Cr signal input ( from Cinch I/O ) , CVBS or R G B signal ( from SCART I/O ). And it can also support 480I, 480P, 720P, 1080i 60Hz HDTV input and 576I, 576P, 720P, 1080I 50Hz HDTV input. Official HD timing: 480P 60, 576P 50, 720P 60, 1080i 60.
Followings are the key devices and function that scaler CPU and Painter I have to control. Scaler CPU: 1. Sage JASM Scaler IC with A/D converter ….>digitized the VGA RGB signal. And format the digitized RGB signal to the data Format that LCD panel can accept. 2. Size and phase clock auto adjustment. 3. Back light brightness and on-off control. 4. VGA mode detection and IC register setting. 5. S2300 de-interlace IC…>de-interlace the video signal. 6. PIP function.
2. COLOR ADJUSTMENT VGA mode : Control JAGASM Scaler for contrast, brightness, R,G,B gain and R,G,B CUT-OFF adjustment . TV / Video mode : TV white balance was adjust by scaler color lookup table. For normal, warm, cool color setup is done by color lookup table. Normal set to original panel color, warm set to 6500, cool set to 9300. User Brightness and contrast, color, tint, are adjusted by SAA7118 via painter . HDTV mode: User Brightness and contrast, color, are adjusted by S2300 via painter .
4.2 Control Key Definition There are 7 keys used in LCD monitor TV. Key nam e Function Source select DTV, TV,AV.. left/Volume down Up/Channel up Down/channel down Right/Volume up Enter VGA mode TV/video mode Left/Volume down Up Down Left/Volume down Up/Channel up Down/Channel Down Right/Volume up Enter Right/Volume up Enter PC mode Auto adjustment hot key press and and the same time for 2 secs.
Sleeping mode (Suspend, standby, off mode): At PC mode: When PC H-Sync or V-Sync do not present for 3 sec. painter Will tell the sacler and then Scaler will send “ No Signal Input “ message to Panel to display . 2 second later stand-by pin output “Low “ signal to turn off S2 for Monitor DPMS . At PIP mode: Same as PC mode 6. HDTV input HD input connector: One VGA 15 pin D-sub connector is used for HDTV video input. PIN No.
