User's Manual

ManualsBrandsPhilips Electronics Industries ManualsElectronics20

Product Information

Product Features

BRILLIANCE 200P4

20-inch color LCD monitor with excellent display performance

Multiple video input allowing connection of DVI-D digital and VGA analog

Embedded AC power supply

Front firing speakers with stereo 2x2W RMS stereo sound output

Advanced AUTO adjustment optimizes picture quality

Adjustable tilt and swivel function

Picture-in-Picture (PIP) function for displaying both PC and video simultaneously on the

screen

Built in module to provide S-Video & CVBS Video inputs(200P4VS, 200P4VG, 200P4VB

models)

Optional module to provide S-video and CVBS video inputs(200P4SS, 200P4SG, 200P4SB

models)

Optional super-ergo base for height adjustment

sRGB compliant

RETURN TO TOP OF THE PAGE

Technical Specifications*

LCD PANEL

• Type TFT LCD

• Screen size 20.1" / 51cm

• Pixel Pitch 0.255 x 0.255mm

• LCD Panel type

1600 x 1200 pixels

R.G.B. vertical stripe

Anti-glare polarizer, hard coated

• Effective viewing area 408 x 306 mm

• Display Colors 8 bits interface (16M colors)

SCANNING

Vertical refresh rate 56Hz-85Hz

Horizontal Frequency 30kHz-94kHz (Analog input)

VIDEO

• Video dot rate 165 MHz

• Input impedance

- Video

75 ohm

- Sync

2K2 ohm

• Input signal levels 0.7 Vpp

• Sync input signal

Separate sync

Composite sync

Sync on green

Exhibit 3

Installation and Operating Onstruction

Summary of content (10 pages)

PAGE 1
Exhibit 3 Installation and Operating Onstruction Product Information Product Features BRILLIANCE 200P4 z z z z z z z z z z z 20-inch color LCD monitor with excellent display performance Multiple video input allowing connection of DVI-D digital and VGA analog Embedded AC power supply Front firing speakers with stereo 2x2W RMS stereo sound output Advanced AUTO adjustment optimizes picture quality Adjustable tilt and swivel function Picture-in-Picture (PIP) function for displaying both PC and video simul
PAGE 2
• Sync polarities Positive and negative • S-Video Y input 1.0Vpp, C input 0.3Vpp, 75ohm input impedance • CVBS Composite, 1.0Vpp, 75 ohm input impedance •Video interface D-Sub (Analog) DVI-D (Digital) AUDIO-IN • Input signal level 0.7 Vpp • Headphone out signal level 20mW x 2, 32 • Input signal connector 3.5mm mini jack • Loudspeaker 4W Stereo Audio (2W/channel RMSx2, 200Hz12kHz, 4 ohm,THD=10%) Optical characteristics • Contrast ratio: 400:1 (typ.) • Brightness: 250 cd/m2 (typ.
PAGE 3
RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1600 x 1200 at 60Hz(analog input) 1600 x 1200 at 60Hz(digtal input) • Recommended 1600 x 1200 at 60Hz * at DVI digital input 37 user definable modes 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 (IBM VGA 10h) 31.5 720*400 70 31.5 640*480 60 37.5 640*480 75 35.2 800*600 56 37.9 800*600 60 46.9 800*600 75 48.4 1024*768 60 60.0 1024*768 75 69.0 1152*870 75 63.9 1280*1024 60 80.
PAGE 4
OFF Blanked No No < 1.5W Amber This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 488 x 459 x220 mm (incl. Pedestal) • Weight 7.5 Kg • Tilt / Swivel -5° ~ 25° / + - 175° • Power supply 100 — 240 VAC, 50/60 Hz • Power consumption 50 W* (typ.
PAGE 5
No connect 13 No connect 21 No connect 6 DDC Clock 14 +5V Power 22 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 No connect 16 Hot Plug Detect 24 T.M.D.S. Clock- T.M.D.S. Clock Shield 2. The 15-pin D-sub connector (male) of the signal cable: Pin Assignment No. Pin Assignment No. 1 Red video input 9 +5V 2 Green video input/SOG 10 Logic ground 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 No connect 13 H.
PAGE 6
RETURN TO TOP OF THE PAGE Physical Function 1) Tilt 2) Swivel RETURN TO TOP OF THE PAGE
PAGE 7
Installing Your LCD Monitor Front View Product Description To switch monitor's power On and Off Power LED To access OSD menu To adjust the OSD To adjust brightness of the display To adjust the OSD To adjust speaker volume Automatically adjust the horizontal position, vertical position, phase a clock setting Signal input selection Activate PIP (Picture in Picture) window RETURN TO TOP OF THE PAGE Rear View
PAGE 8
1 CVBS video input (for video model 200P4V- only ) 2 S-Video input (for video model 200P4V- only ) 3 Earphone jack 4 VGA input 5 DVI-D input 6 Audio R/L input 7 PC audio input 8 AC power input RETURN TO TOP OF THE PAGE Optimizing Performance z For best performance, ensure that your display settings are set at 1600x1200@60Hz Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information.
PAGE 9
Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 10
équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.