User's Manual

ManualsBrandsPhilips Electronics Industries ManualsComputers & AccessoriesColor Monitor

Product Information

Product Features • Technical Specifications • Automatic Power Saving • Physical

Specification • Pin Assignment • Product Views

Product Features

107E5

17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with

MACs and PCs

Autoscan covers horizontal frequencies up to 70 kHz offering a maximum resolution of

1280 x 1024 with flicker free display of 1024 x 768 at up to 88 Hz

Flat square High Contrast CRT with high-resolution 0.27 mm dot pitch (0.23 hdp).

Large screen display in a small footprint: 17-inch conventional monitor with maximum depth

of only 419 mm/16.5"

Multimedia Base and USB Hub option

sRGB for true on screen color representation.

FCC, CE (in selected countries only) and ISO9241, ISO14001 certified

RETURN TO TOP OF THE PAGE

Technical Specifications*

CRT

• Size and deflection 17 inch / 41 cm ; 90° deflection angle

• Dot pitch 0.27 mm

• Horizontal pitch 0.23 mm

• Tube type

Shadow mask, flat square, high contrast, anti-glare,

anti-static, anti reflection, light transmission 47%

• Phosphor P22

• Recommended display area 12.0" x 9.0" / 306 x 230 mm

• Maximum display area 12.8" x 9.6" / 325 x 244 mm

SCANNING

• Horizontal scanning 30 - 70 KHz

• Vertical scanning 50 - 160 Hz

VIDEO

• Video dot rate 108 MHz

• Input impedance

- Video 75 ohm

- Sync 4.7 kOhm

Exhibit 3

Installstion and Operating Instructions

Summary of content (9 pages)

PAGE 1
Exhibit 3 Installstion and Operating Instructions Product Information Product Features • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 107E5 z z z z z z z 17-inch (16.
PAGE 2
• Input signal levels 0.7 Vpp • Sync input signal Separate sync • Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 degrees K x = 0.283 / y = 0.297 • at 6500 degrees K x = 0.313 / y = 0.329 sRGB sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.
PAGE 3
ON Active Yes Yes OFF Blanked No No Typical 64W 0% Green 98% Flashing Green <1W This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimensions 16.5" x 15.1" x 15.6" / 419 x 383 x 397 mm (including base) 16.5" x 13.1" x 15.6" / 419 x 333 x 397 mm (excluding base) • Weight 14.
PAGE 4
1 Red video input 9 +5V DDC supply 2 Green video input 10 Logic ground 3 Blue video input 11 Identical output connected to pin 10 4 Identical output connected to pin 10 12 Serial data line (SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components.
PAGE 5
Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls for the CONTRAST will show up. Brightness hotkey. When the "+" button is pressed, the adjustment controls for BRIGHTNESS will show up. "-" and "+" buttons, are used for adjusting the OSD of your monitor. LightFrame™ hotkey.
PAGE 6
Rear View 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC.
PAGE 7
Regulatory Information TCO '99 Information • TCO'99 Environmental Requirements • CE Declaration of Conformity•Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S.
PAGE 8
Energy Star Declaration PHILIPS 107E5* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software.
PAGE 9
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.