User's Manual

ManualsBrandsPhilips Electronics Industries ManualsComputers & AccessoriesColor Monitor

Product Information

Product Features • LightFrame™ for Windows • Technical Specifications •

Automatic Power Saving • Physical Specification • Pin Assignment • Product

Views

Product Features

107B40/43



17" -inch (16.0" VIS) color monitor with excellent front of screen performance for use with

MACs and PCs



Autoscan covers horizontal frequencies up to 86kHz offering a maximum resolution of

1600 x 1200 with flicker free display of 1024 x 768 at up to 107 Hz



Flat square high contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp)



LightFrame™ for brightest and sharpest display of movie and photo windows



XSD-Xtra Space Design for large screen display in a small footprint: World's shortest 17-

inch conventional monitor with maximum depth of only 408 mm/16.1"



Multimedia Base and USB Hub option



sRGB for true on screen color representation.



FCC, CE (in selected countries only) and ISO9241, ISO14001 certified

RETURN TO TOP OF THE PAGE

LightFrame™ for Windows

Introduction

Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT

(picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and

videos on the monitor screen.

To control the LightFrame™ feature in your monitor, you have to install the LightFrame™

application which you will find on this CD-ROM.

Note

Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier

Philips monitors or other manufacturers’ monitors will not work with this special software. It is

recommended that you install this software only on a Philips monitor designed to use it. These

monitors can be identified by the LightFrame™ logo on the front of the monitor.

This software is not designed for use with LCD flat screen monitors.

LightFrame™ will work with true Windows-based programs and DOS-based programs that

Exhibit 3

Installstion and Operating Instructions

Summary of content (15 pages)

PAGE 1
Exhibit 3 Installstion and Operating Instructions Product Information Product Features • LightFrame™ for Windows • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 107B40/43 17" -inch (16.
PAGE 2
pictures. You can decrease this effect by lowering the sharpness setting in the LightFrame™ 3 control panel. Q: How can I tell if my monitor comes with LightFrame™ 3? A: All Philips LightFrame™ 3 monitors display this logo on their front bezel: Q: How do I use the LightFrame™ 3 control bar that appears at the top my screen? A: The control bar is another upgrade that helps you run all LightFrame™ 3’s neat, new features. The illustration below describes the tasks each button performs.
PAGE 3
• Phosphor P22 • Recommended display area 12.0" x 9.0" / 306 x 230 mm • Maximum display area 12.9" x 9.6" / 327 x 244 mm SCANNING • Horizontal scanning 30 - 86KHz • Vertical scanning 50 - 160 Hz VIDEO • Video dot rate 176 MHz • Input impedance - Video 75 ohm - Sync 2.2 kOhm • Input signal levels 0.7 Vpp Separate sync • Sync input signal Composite sync • Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 K degrees x = 0.283 / y = 0.
PAGE 4
RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up".
PAGE 5
* These information are subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin Assignment No. Pin Assignment No. 1 Red video input 9 No pin 2 Green video input 10 Logic ground 3 Blue video input 11 Identical output connected to pin 10 4 Identical output connected to pin 10 12 Serial data line (SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V.
PAGE 6
Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) • PCUH411 USB Hub (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor Brightness hotkey. When the RIGHT arrow is pressed, the adjustment controls for BRIGHTNESS will show up.
PAGE 7
RETURN TO TOP OF THE PAGE Rear View 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC.
PAGE 8
Regulatory Information TCO '99 Information • TCO Environmental Requirements • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S.
PAGE 9
Energy Star Declaration PHILIPS 107B4* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software. From indicated inactivity to Power Saving Position A2, the total time must not be set to more than 70 minutes.
PAGE 10
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
PAGE 11
Exhibit 4 Brief Description of Circuit Functions The brief ckt. description of M38 107B4 17” Monitor 0. Functional Block Diagram 1. General Description 2. Description of Circuit Diagram A. Power Supply B. Horizontal Deflection/Vertical Deflection/EHT Generator C. Video board & DDC D.
PAGE 12
1. GENERAL DESCRIPTION The new refreshed M32 using conventional 17” CRT, it is so-called “Digital Controlled Auto-scan Color Display Monitor” with high resolution which can operate at horizontal scan frequency from 30KHz up to 70KHz, and the vertical scan frequencies can operate from 50 to 160 Hz.
PAGE 13
B. HORIZONTAL DEFLECTION / VERTICAL DEFLECTION / EHT GENERATOR HORIZONTAL DEFLECTION: The heart of horizontal/vertical deflection controller is TDA4841, which can offer a complete and efficient small signal sync processing for auto-sync monitors, all functions are controlled via I2C bus. This controller provides sync processing, which can accept separate and composite (H+V) input signals, a very short settling time after mode change for protection of external power components has been taken into account.
PAGE 14
C. VIDEO AMPLIFIER & DDC2B VIDEO AMPLIFIER: The video circuit mainly consists of pre-amplifier STV9211, STV9556 post amplifier and DC coupling application, the video DC level and gain at cathode are controlled via I2C bus & software.
PAGE 15
D. MICRO-CONTROLLER GENERAL DESCRIPTION: The Weltrend ET62P2 micro-controller is used to control all required functions of monitors, the preset data are stored in EEPROM M24C16, the most important point is used “ interrupt “ to do the fast detect of mode change, then the MCU deliver a good protection behavior for horizontal output transistor during mode change. HARDWARE DEFINITION: a) KEY BOARD There are five keypads at the front of monitor for the OSD control.