Register your product and get support at www.philips.com/welcome Thank you for choosing Philips. Need help fast? Read your Quick Start Guide and/or User Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/welcome 1 Philips vous remercie de votre confiance.
English EN DC350_37.
4 DC350_37.
1 2 Important Safety Notice Your Docking Entertainment System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Prepare the remote control Connect power Set clock and date Turn on 4 Play Play from iPod/iPhone Play from an external device 5 Adjust sound Adjust volume level Enhance bass Select a preset sound effect Mute sound 6 Listen to radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a pre
1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. p Apparatus shall not be exposed to dripping or splashing. q Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). r This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations.
• Connect the equipment into an outlet on a circuit different from that to which the • receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by Philips could void the user’s authority to operate this equipment. Model number: PHILIPS DC350/37 Trade Name: Philips Responsible Party: Philips Consumer Lifestyle P. O.
Your Docking Entertainment System Introduction English 2 With this unit, you can enjoy audio from the iPod, iPhone, other audio devices, or the radio. If you own a Bluetooth-enabled device, you can also receive phone calls or listen to audio from the device. The radio, iPod, or iPhone can be set as the alarm timer. You can set two alarm timers to go off at different times. For the best sound quality, enrich sound from any source with Digital Sound Control (DSC) and Dynamic Bass Boost.
a ALM 1 • Set the first alarm timer. • View the first alarm time. • Turn off the first alarm tone. b Bluetooth indicator • Indicate Bluetooth connection. c • • Turn on the unit or switch to standby mode. Turn off an alarm tone. d SLEEP • Set the sleep timer. e PRESET +/• Select a preset radio station. • Program radio stations. f MUTE • Mute volume. • Mute the built-in microphone during a phone call. PROG • Program radio stations. TIME SET • Set the clock.
m Start or pause iPod/iPhone play. English • n SOURCE • Select a source: iPod/iPhone, Bluetooth, tuner or MP3 link. o Tilt adjustment rod • Move forward/backward to adjust the angle at which the iPod/iPhone tilts. p Display panel • Show current status. q ALM 2 • Set the second alarm timer. • View the second alarm time. • Turn off the second alarm tone. r REPEAT ALARM/BRIGHTNESS CONTROL • Repeat an alarm tone at 9-minute intervals. • Adjust the display brightness.
v DEMO • Jack for a special device (not supplied) to demonstrate features of the unit. w DC IN • Jack for the supplied AC adaptor. x Tilt adjustment control • Control the angle at which the iPod/iPhone tilts. y iPhone/iPod-RADIO-BUZZER • Select alarm mode. Overview of the remote control a iPod/iPhone • Select iPod/iPhone source. b POWER • Turn on the unit or switch to standby mode. • Turn off an alarm tone. 12 DC350_37.
PRESET +/• Select a preset radio station. • Program radio stations. d • • English c /OK Start or pause iPod/iPhone play. Confirm an iPod/iPhone menu selection. / e • • • • • Skip to the previous/next audio file. Search within an audio file. Tune to a radio station. Adjust time. Select 12 hour or 24 hour format. f TUNER • Select tuner source. g MENU • Access iPod/iPhone menu. h SLEEP • Set the sleep timer. i DBB • Turn on or off dynamic bass enhancement.
q BLUETOOTH • Select Bluetooth source. 3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
• • Before pressing any function button on the remote control, first select the correct source with the remote control instead of the main unit. If you are not going to use the remote control for a long time, remove the battery. English Note Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
3 Connect the other end of the AC adaptor to the wall outlet. Set clock and date 1 2 3 4 5 6 Press and hold SET TIME for 2 seconds. » The hour digits are displayed and begin to blink. Press / to set the hour. Press SET TIME to confirm. » The minute digits are displayed and begin to blink. Repeat steps 2-3 to set minute, year, month and day. Press / to select 12 hour or 24 hour format. Press SET TIME to confirm. Turn on 1 Press POWER. » The unit switches to the last selected source.
• iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. iPhone, iPhone 3G. English • Load the iPod/iPhone 1 2 With the connectors facing each other, place the iPod/iPhone in the dock. Turn the tilt adjustment control to adjust the angle at which the iPod/iPhone tilts. » When the unit is connected to power, the docked iPod/iPhone begins to charge. Remove the iPod/iPhone 1 Pull the iPod/iPhone out of the dock.
To navigate the menu, press MENU, and press PRESET +/- to select, then /OK to confirm. press • Connect to a computer 1 2 3 Load the iPod/iPhone in the dock. Press iPod/iPhone select the iPod/iPhone source. Connect the mini USB cable (supplied) to: • the TO PC jack (mini USB jack) on the back of the unit. • the USB jack on the computer. » If iTunes is installed on the computer, the connected iPod/iPhone begins to synchronize with iTunes. Refer to the device user manual for more details.
1 6 English Mute sound During play, press MUTE to mute/unmute sound. Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station 1 2 3 Press TUNER to select FM. Press and hold / for more than 2 seconds. » [Srch] (search) is displayed. » The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations. • To tune to a weak station, press reception.
5 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna.
English Connect with a Bluetooth device Note • • • • • The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet). Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of the device. Compatibility with all Bluetooth devices is not guaranteed. Any obstacle between this unit and a Bluetooth device can reduce the operational range. Keep this unit away from any other electronic device that may cause interference.
Disconnect a device 1 Press and hold for more than 5 seconds • To disconnect, you can also turn off the connected device or move it beyond the communication range. • The Bluetooth indicator turns off. Re-connect a previously-connected device Tip • For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this unit, it re-connects automatically. 1 2 Turn on the main unit.
English Tip • To be heard more clearly, speak closer to the microphone. • If an echo is heard, reduce the volume of the main unit. • If you observe communication difficulties, position the Bluetooth device closer to the main unit. Listen to music Note • • 1 2 8 You can listen to audio through this unit from devices that support A2DP or AVRCP. As iPhone doesn’t support Bluetooth audio streaming, this unit doesn’t play audio files from iPhone through Bluetooth connection. Connect the Bluetooth device.
Note • Only the latest volume setting for alarm tone works. Tip • To view alarm time, press ALM 1 or ALM 2 repeatedly until alarm time is displayed. Set alarm mode 1 Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the source for the alarm. » When the alarm time comes, the selected Phone/iPod, or radio or buzzer turns on. Tip • If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically.
This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When the sleep timer is activated, the display shows . English Set the sleep timer To deactivate sleep timer Press SLEEP repeatedly until [OFF] (off) is displayed. disappears on the display.
Tuner Tuning Range FM: 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio <22 dBf <40 dBf Search Selectivity >30 dBf Total Harmonic Distortion <3% Signal to Noise Ratio >40 dB Speakers Speaker Impedance 4ohm Speaker Driver 2 x 1” full range driver Sensitivity >80dB/m/W Bluetooth Communication system Bluetooth Standard version 2.0 Output Bluetooth Standard Power Class 2 Maximum communication range Line of sight approx. 8m Frequency band 2.
AC power (power adaptor) Input: 100-240V~, 50-60Hz, 0.55A; 2A; Brand name: Philips; Output: 12V Model No.: GFP241DA-1220-1 Operation Power Consumption 20W Standby Power Consumption <4W Dimensions - Main Unit (W x H x D) 173 x185 x 144mm Weight - Main Unit 0.62 kg English General information 10 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself.
• • Replace the battery. Aim the remote control directly at the sensor on the front of the unit. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. Clock setting erased • Power has been interrupted or the power cable has been disconnected. • Reset the clock. Sound input to the microphone cannot be heard clearly • Speak closer to the microphone when talking, or talk louder. • Reduce or remove background noise.