User's Manual

B120/10
Connect the B120 monitor to the same Wi-Fi network as your phone
by following the onscreen instructions.
Warning - Strangulation Hazard - Children have
STRANGLED in cords. Keep this cord out of the reach
of children (more than 3 ft.(0.9 m) away). Do not
remove this tag.
As instructed on the screen, put the QR code image in front of the lens of the
monitor. Follow the onscreen instructions to complete the setup.
The green light is always on when the connection is complete.
1.
On your iPhone or Android phone, download
the Philips In.Sight application from AppStore
or Google play.
2.
Create and log in to your
account.
User Manual
+
In.Sight
Talk back
Add more monitors
Tap and hold When you talk to the micophone of the mobile phone.
You can be heard on the side of the B120 monitor.
Night vision
Tap to show the options bar. Tap On to switch the night vision on.
After the night vision is on for 10 minutes,
it switches off automatically.
Watch the video
Double tap to zoom in or out. Drag to pan through the video.
Switch to the list of monitors
Indicator of connectivity strength
Green: Strong
Yellow: Weak
Red: Disconnected
Switch the night vision on or off
Current temperature and humidity
Take photos
Switch the speaker on or off when your mobile phone goes to the standby mode
Record videos
Tap and hold to talk to the side of B120 monitor
Through Wi-Fi or 3G mobile network, connect your mobile phones to the B120 monitors over the Yoics service.
You can stream live video and audio remotely and locally from the B120 monitors to your mobile phone.
Mount on the stand Mount on walls
Light sensor
IR image sensor
Lens
Microphone
Status LED
Temperature and humidity sensor
USB connector for USB power adapter
Next
Connect the B120 monitor to power. Wait until the amber light flashes.
Auto
On
Go to the list of monitors. Tap Add. Follow the onscreen instructions to complete the first-time setup.
Add
3G
Stream Live video/ audio
First-time setup
www.philips.com/welcome
Always there to help you
Register your product and get support at
Reset
User Manual
B120/37
B120A/37