SE745_IFU_EN.book Page 11 Monday, March 26, 2007 8:41 PM 3.4 Overview of the base station P A Play/Stop key Play phone messages (the first recorded will be played first). Stop message playback. B LED indicator Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when is pressed. Indicates the current message number during playback.
SE745_IFU_EN.book Page 12 Monday, March 26, 2007 8:41 PM 3 Push into place until a click sound is heard. 4 Getting started 4.1 Connect the base station 1 Place the base station in a central location near the telephone line socket and electricity socket. Bottom of the base support 4 To remove, simply pull the base support away from the base unit. 4.1.
SE745_IFU_EN.book Page 13 Monday, March 26, 2007 is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible. The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit. Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone. 4.
SE745_IFU_EN.book Page 14 Monday, March 26, 2007 8:41 PM 4.4 Menu structure The table below describes the menu tree of your phone. Press left soft key mMENU in idle mode to enter each option. Use navigation keys : to navigate within the menus.
SE745_IFU_EN.book Page 15 Monday, March 26, 2007 Advanced Set 8:41 PM Recall Time Short/Medium/Long Dial Mode Tone/Pulse Call barring Barring Mode On/Off Barring Nr. Number 1/2/3/4 Baby call Mode On/Off Registration Number Select Base Unregistration Change PIN Reset Net.
SE745_IFU_EN.book Page 16 Monday, March 26, 2007 Answer Machine 8:41 PM Play Delete All Record Memo Answer Only Personalised/Predefined Answ. Mode Answ. & Record Personalised/Predefined Ring Delay 1/2/3/4/5/6/7 Toll saver Remote access On/Off HS Screening On/Off Base Screening On/Off Voice Language On/Off Ans. On/Off Ans.
SE745_IFU_EN.book Page 17 Monday, March 26, 2007 5 Using your phone 5.1 Make a call 5.1.1 Predialling 1 Dial the number (maximum 24 digits). 2 Press r key. • The call is initiated. Tip You may insert a prefix number to the beginning of your predial number, see “Set Auto Prefix” on page 33 for more information. 8:41 PM number or name in the call log (see “Access Call log” on page 24). 5.1.5 Call from the phonebook 1 Press d in idle mode. 2 Scroll : to a phonebook entry. 3 Press r key.
SE745_IFU_EN.book Page 18 Monday, March 26, 2007 8:41 PM 5.3 End a call To end a conversation, press e key. • The call ends. Tip If Auto Hang-up mode is activated (see “Activate /Deactivate Auto Hang-up” on page 29) , you can simply place the handset back to its base station to end the call. This feature is activated by default. Note The call duration (HH-MM-SS) will be displayed on the handset screen for about 5 seconds. Press >BACK.to return to idle mode.
SE745_IFU_EN.book Page 19 Monday, March 26, 2007 6 Use more of your phone 6.1 Switch the handset on/off Press and hold e key for 3 seconds to switch off the handset in idle mode. Short press e key to switch on the handset. 6.2 Keypad lock/unlock Press and hold * key for 2 seconds to lock/ unlock the keypad in idle mode. 6.3 Text or number entry When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times.
SE745_IFU_EN.book Page 20 Monday, March 26, 2007 6.4.4 Adjust loudspeaker volume During a call, press : to select from Volume 1 to Volume 5. 6.4.5 Initiate a second call (subscription dependent) During a call, press >OPTION and select Init. 2ND Call to put the current call on hold and initiate a second external call. 6.4.6 Consult phonebook During a call, press >OPTION and select Phonebook to access and review phonebook entries.
SE745_IFU_EN.book Page 21 Monday, March 26, 2007 6.7.1 Access phonebook 1 Press d in idle mode and scroll : to browse the phonebook. • The phonebook entries are listed in alphabetical order. 2 To view the details of a phonebook entry, scroll : to the phonebook entry and press mVIEW. 2 To dial a number from the phonebook, scroll : to the phonebook entry and press r.
SE745_IFU_EN.book Page 22 Monday, March 26, 2007 8:41 PM 2 Slide the SIM card between the retaining clips, 6.7.6.1 Store Direct Access Memory 1 Press mMENU in idle mode, scroll : to Phonebook and press mSELECT, scroll : to Direct Memory and press mSELECT. 2 Scroll : to select a key (Keys 0 to 9) and press mVIEW. • The stored number is displayed (if any). 3 Press mSELECT to display the menu options. 4 Press mSELECT again to select Add. 5 Scroll : to the entry you wish to store as direct access memory.
SE745_IFU_EN.book Page 23 Monday, March 26, 2007 6.7.8 Transfer phonebook This feature allows you to transfer the phonebook from one handset to another handset when there are at least 2 handsets registered to your base station. 1 Press mMENU in idle mode, scroll : to Phonebook and press mSELECT, scroll : to Phbk transfer and press mSELECT. 2 Scroll : to Copy All or Select Entry. • If you choose Copy All then all entries in the handset will be copied to the selected handsets.
SE745_IFU_EN.book Page 24 Monday, March 26, 2007 8:41 PM 4 Edit the number (if necessary) and press 6.8.4 Delete the redial list 1 Press > REDIAL in idle mode. 2 Press mMENU, scroll : to Delete All and press mSELECT. 3 Press mOK to confirm. • A validation tone is emitted. mOK. : to choose a group (, 5 Scroll , , ) and press mSELECT. • A validation tone is emitted. 6.9.3 Delete a call list entry 6.
SE745_IFU_EN.book Page 25 Monday, March 26, 2007 8:41 PM 2 If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll : to the specific handset you want to call and press mSELECT. 6.10.2 Transfer an external call to another handset 1 During the call, press and hold ckey to put the external call on hold (the caller can no longer hear you).
SE745_IFU_EN.book Page 26 Monday, March 26, 2007 6.11 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. 1 Press p key on the base station. • All the registered handsets start to ring. 2 Once retrieved, press any key on the handset to end the paging. Note If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode. Tip To stop paging, press p key on the base station again. 6.
SE745_IFU_EN.book Page 27 Monday, March 26, 2007 6.12.4.1 Activate/Deactivate Do not Disturb mode 1 Press mMENU in idle mode, scroll : to Clock & Alarm and press mSELECT, scroll : to Do not Disturb and press mSELECT. 2 Press mSELECT again to enter Activation. 3 Scroll : to On or Off. 4 Press mSELECT to confirm. 6.12.4.2 Set Day of Do not Disturb mode : to Clock & Alarm and press mSELECT, scroll : to Do not Disturb and press mSELECT, scroll : to Set Day and press mSELECT.
SE745_IFU_EN.book Page 28 Monday, March 26, 2007 7 Personal settings 7.1 Handset Tones 7.1.1 Set the Ring Volume Danger When setting the ring volume of your phone or when the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. There are 6 ringer volume options (Silence, Low, Medium, High, Boost and Progressive). The default level is Medium.
SE745_IFU_EN.book Page 29 Monday, March 26, 2007 1 Press m MENU in idle mode, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT. : to your desired wallpaper and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. 8:41 PM • A validation tone is emitted and the screen returns to previous menu. 2 Scroll 7.3 Set Contrast Level There are 3 contrast level options (Level 1, Level 2 or Level 3).
SE745_IFU_EN.book Page 30 Monday, March 26, 2007 handset 1) in the room to be monitored. If this handset detects a sound level greater than a certain threshold, it will automatically initiate an internal call to the selected handset (e.g. handset 2). 7.8.1 Activate Babysit Mode Note In Babysit mode, all keys are deactivated except for mMENU key. The handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.
SE745_IFU_EN.book Page 31 Monday, March 26, 2007 8:41 PM mSELECT to confirm. 8 Advanced settings 8.1 Change Recall time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long. The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. Note This setting is useful when using network services.
SE745_IFU_EN.book Page 32 Monday, March 26, 2007 5 Enter the Baby Call number and press mOK to confirm. • A validation tone is emitted. 8.3.2 To deactivate Baby Call mode m MENU (when Baby Call mode has been activated before). 2 Scroll : to Off and press mSELECT to confirm. 1 Long press 8.3.3 To change Baby Call number 1 Press m MENU in idle mode, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT. 8:41 PM scroll : to Registration and press mSELECT.
SE745_IFU_EN.book Page 33 Monday, March 26, 2007 Note If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode. To unregister a handset that does not belong to the SE740/745 range, you can only use the SE740/ 745 handset to unregister it. 8.7 Change Master PIN The Master PIN is used for setting call barring/ baby call number, registration/unregistration of handsets and for accessing the answering machine remotely.
SE745_IFU_EN.book Page 34 Monday, March 26, 2007 Note If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after r key is pressed. For numbers starting with *, # or a pause (P), the prefix number will not be added to the predial number after r key is pressed. 8.10 Country Selection The availability of this menu is dependent on your country. You can select another country different from the one chosen during WELCOME mode.
SE745_IFU_EN.book Page 35 Monday, March 26, 2007 8:41 PM 8.
SE745_IFU_EN.book Page 36 Monday, March 26, 2007 9 8:41 PM Games 9.1 Play Snake game The objective of this game is to move the snake and eat as many "food blocks” as possible. When the food is eaten, the snake grows in length and the score increases. Once you hit the body of the snake itself, the game is over. . 1 Press mMENU in idle mode, scroll : to Games and press mSELECT, scroll : to Snake and press mSELECT. • An instruction screen is displayed.
SE745_IFU_EN.book Page 37 Monday, March 26, 2007 10 8:41 PM Telephone answering machine (TAM) Your phone features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages. The maximum recording time is 30 minutes (including all your personalised outgoing messages).
SE745_IFU_EN.book Page 38 Monday, March 26, 2007 8:41 PM mSTART to start recording the memo. 3 Press mSTOP to end the recording. • The recorded memo is automatically saved. 4 Press >BACK at any time to return to the previous menu. 2 Press 10.1.2 Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages.
SE745_IFU_EN.book Page 39 Monday, March 26, 2007 satisfied with the recorded outgoing message, simply record a new message to overwrite the old one. 1 Repeat Steps 1 to 4 in “Set the Answer mode” in the previous section. 2 Scroll : to Record message and press mSELECT. 3 Press mSTART to start recording and press mSTOP to end the recording. • The recorded message will be played and the screen returns to previous menu once it has finished playing.
SE745_IFU_EN.book Page 40 Monday, March 26, 2007 remote access of your answering machine. Before you can use the remote access feature, you must change your Master PIN code. Your Master PIN code cannot be the default 0000. To change your Master PIN code, refer to “Change Master PIN” on page 33. 10.7.2.1 Activate/Deactivate Remote Access 1 Press mMENU in idle mode, scroll : to Answer Machine and press mSELECT, scroll : to Ans. Settings and press mSELECT, scroll : to Remote access and press mSELECT.
SE745_IFU_EN.book Page 41 Monday, March 26, 2007 8:41 PM • A validation tone is emitted and the screen returns to previous menu. 10.8.3 Set Voice Language This menu allows you to change the language of the predefined outgoing message. The availability of this menu and the language options available are country dependent. 1 Press mMENU in idle mode, scroll : to Answer Machine and press mSELECT, scroll : to Ans. Settings and press mSELECT, scroll : to Voice Language and press mSELECT.
SE745_IFU_EN.
SE745_IFU_EN.book Page 43 Monday, March 26, 2007 12 8:41 PM Frequently asked questions In this chapter, you will find the most frequently asked questions and answers about your phone. Connection Set-up The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. SEARCHING... is displayed on handset and The handset does not charge! • Check charger connections.
SE745_IFU_EN.book Page 44 Monday, March 26, 2007 Product behaviour Keypad does not work! • Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call! • This is a normal behavior. The handset consumes energy while calling. The handset cannot be registered to the base station! • Maximum number of handsets (6) has been reached. To register a new handset, unregister an existing handset. • Remove and replace the handset batteries.
SE745_IFU_EN.
SE745_IFU_EN.book Page 46 Monday, March 26, 2007 8:41 PM Copyright © 2007 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Specifi cations are subject to change without notice. Document order number: 3111 285 37571 (EN) Printed in P.R.C.