Product illustration on inside flap: Your baby monitor SBC 8C769 Philips is dedicated to producing caring, reliable products that new moms and dads really need. Products whose reliability and operating quality bring reassurance. You can trust this Philips baby monitor to provide round-the clock support by ensuring you can sways hear your baby clearly, no matter where you are in the house.
ENGLISH 3 Important information Please read this guide carefully before using the baby monitor; and keep it for future reference. This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision znd should not be used as such. This product is not intended to be used as a medical monitor. Check your child's activity at regular intervals as this monitor does not detect silent activity. Do not immerse any part of the Baby Monitor in water or expose it to moisture.
4 ENGLISH Getting your baby monitor ready 1 Position the Baby unit at least | yard away from your baby. Never place the baby unit inside the baby's bed or playpen. i 2 Set channel selection switches to the same channel on both units. i TT power adapter to Baby unit socket. 4 Plug the power adapter into a utility outlet. 5 Move away from the Baby unit with the Parent unit. : If units are positioned too close to each other thee 2 high-pitched noise can be heard.
ENGLISH 3 Using your baby monitor Listening to your baby Push the power button on the Baby unit to turn it on. >The green POWER light lights. Switch the Parent unit on and adjust the volume to level you prefer using the VOLUME ON/OFF control. : The digital SYSTEM CHECK light lights continuously (green) when the Parent unit and Baby unit are in touch with each other. Checking the temperature of your baby’s room Read the temperature of the baby’s room on the LCD display of the Parent unit.
6 ENGLISH * The baby monitor has an operating range of up to 600ft, in ideal open-air Features explanation Avoiding interference If there is interference or if sound reception is poor, switch both units to another channel. Always make sure that the saccharine selection switches on both units are set to the same position. Monitoring baby silently Adjust the volume on the Parent unit to the lowest level using the VOLUME ON/OFF control (do not switch off).
ENGLISH Using batteries Operating the Baby unit wordlessly Remove the battery compartment cover. Insert four |.5V, LRé (AA) Alkaline batteries noting the + and configuration inside the battery compartment. Batteries not included; we recommend non-chargeable Philips Alkaline batteries. Put the cover back in place and secure. > If the red POWER light flashes install new batteries. The unit operates for up to 30 hours on batteries.
ENGLISH Technical specifications Battery pack; rechargeable Nigh for Parent unit (included); Optional batteries 4 x 1.5Y: AA ailing for Baby unit (not clouded: AC power adapter 120V AC, 60 Hz (twa included): Output voltage 3 DC, 200mA. hat compiles with safety standard EN£0950 and that has the following specification: input output 8 Volt DC 7 200maA, up to 600 fl. in ideal conditions (walls. floors, ete, can limit this d stance.
Problem solving Possible cause ENGLISH Solution 9 Parent unit: unit is not turned on, Turn VOLUME ON/OFF control! downwards. Batteries are low. Recharge batteries. Baby unit: unit is not turned on. Push power button, Power adapter is not plugged in or batteries are exhausted. Plug in power adapter or replace batteries. Units are too close together, Move parent unit away from baby unit, Turn VOLUME ON/OFF control on parent unit upwards. Battery life is at an end. Connect charging base to utility power.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment, NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part |5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.