323E7 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance..................................1 1.2 Notational Descriptions............. 2 1.3 Disposal of product and packing material........................... 3 2. Setting up the monitor................ 4 2.1 Installation.....................................4 2.2 Operating the monitor................6 3. Image Optimization..................... 8 3.1 SmartImage Lite...........................8 3.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important • If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center.
1. Important bodily harm and tells you how to avoid the problem. make the packaging easily separable into mono materials. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority. Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative. 1.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents 323E7 使用 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base. 前请阅读使用说明 inkl © 201 6 Kon User’s Manual Monitor drivers 保留备用 ijke P h il ip s .A N.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Front view product description 2 1 5 4 3 6 7 6 1 5 3 4 2 Power input Audio input VGA input DVI input HDMI input Earphone jack 7 Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
3. Image Optimization 3. Image Optimization 3.1 SmartImage Lite What is it? SmartImage Lite provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage Lite delivers great optimized monitor performance. 1. Toggle to the left to launch the SamrtImage on screen display. Why do I need it? 2.
3. Image Optimization • outstanding clarity in vibrant colors - all without artifacts and faded colors. 3.2 SmartContrast Game: Turn on over drive circuit for best response time, reduce jaggy edges for fast moving objects on screen, enhance contrast ratio for bright and dark scheme, this profile delivers the best gaming experience for gamers.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) SmartResponse (typ.) Optimum Resolution Viewing Angle Flicker free Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency sRGB IPS Technology W-LED system 31.5" W (80.1 cm) 16:9 0.364 x 0.364 mm 20,000,000:1 14ms (GtG) 5ms (GtG) 1920x1080 @ 60Hz 178° (H) / 178° (V) @ C/R > 10 (typ.) Yes SmartImage Lite 16.
4. Technical Specifications Off Power LED indicator Power Supply <0.71 BTU/hr <0.69 BTU/hr <0.77 BTU/hr On mode: White, Standby/Sleep mode: White (blinking) Built-in,100-240V AC, 50-60Hz Dimension Product with stand (WxHxD) Product without stand (WxHxD) Product with packaging (WxHxD) 703 x 522 x 216 mm 703 x 431 x 64 mm 836 x 643 x 169 mm Weight Product with stand Product without stand Product with packaging 6.90 kg 5.88 kg 9.
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 44.77 1280x720 59.86 60.00 1280x960 60.00 63.89 1280x1024 60.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 6. Customer care and warranty 6.
6. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
6.
6. Customer care and warranty 6.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
6. Customer care and warranty Norway Infocare +47 2270 8250 Local call tariff Mon to Fri : 9am - 6pm Poland MSI +48 0223491505 Local call tariff Mon to Fri : 9am - 6pm Portugal Mainteq 800 780 902 Free of charge Mon to Fri : 8am - 5pm Spain Mainteq +34 902 888 785 € 0.
6. Customer care and warranty Serbia&Montenegro N/A Kim Tec d.o.o. +381 11 20 70 684 Slovakia N/A Datalan Service +421 2 49207155 Slovenia N/A PC H.and +386 1 530 08 24 the republic of Belarus N/A ServiceBy +375 17 284 0203 Turkey N/A Tecpro +90 212 444 4 832 Ukraine N/A Topaz +38044 525 64 95 Ukraine N/A Comel +380 5627444225 Contact Information for NORTH AMERICA: Country Call center Consumer care number U.S.A.
6. Customer care and warranty Philippines EA Global Supply Chain Solutions ,Inc. (02) 655-7777; 6359456 Mon.~Fri. 8:30am~5:30pm Singapore Philips Singapore Pte Ltd (Philips Consumer Care Center) (65) 6882 3966 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm South Africa Computer Repair Technologies 011 262 3586 Mon.~ Fri. 08:00am~05:00pm Taiwan FETEC.CO 0800-231-099 Mon.~Fri. 09:00 - 18:00 Thailand Axis Computer System Co., Ltd. (662) 934-5498 Mon.~Fri.
7. Troubleshooting & FAQs 7. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 7.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
7. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
7. Troubleshooting & FAQs • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920x1080@60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC. Ans.: Simply press the button, then select 'Reset' to recall all of the original factory settings. Q6: Is the LCD screen resistant to scratches? Ans.
7. Troubleshooting & FAQs 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color. off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Note A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin).
© 2016 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.