E Line 288E2 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor................. 8 2.3 Remove the Base Assembly for VESA Mounting............................10 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • Unplug the monitor if you are not going to use it for an extensive period of time. • Do not knock or drop the monitor during operation or transportation.
1. Important static images over an extended period may cause “burn-in”, also known as “after-imaging” or “ghost imaging”, on your screen. • 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 288E2UAE 2. Setting up the monitor E Line 288E2 2.1 Installation Quick Start Package contents Register your product and get support at www.philips.com/welcome 288E2A/288E2E E Line 288E2 Monitor User’s Manual 使用产品前请阅读使用说明 Contents: 2020 User’s Manual Drivers 保留备用 © TO rsio es Inv ts Lt d. Al lr ig ht sr es e rv ed .
2. Setting up the monitor Install base stand 1. Connecting to your PC In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. 288E2A 2 3 4 5 6 7 1 2 1 2. Hold the stand with both hands. (1) Gently attach the base to the stand.
2. Setting up the monitor 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete. 288E2UAE 2 3 4 5 6 7 8 1 4 USB hub Fast Charger To comply with International energy standards, the USB hub/ports of this display are disabled during Standby and Off modes. 2 Connected USB devices will not work in this state. To permanently put the USB function in “ON” state, please go to OSD Menu, then select “USB standby mode”, and switch it to “ON” state.
2. Setting up the monitor 2.2 Operating the monitor Description of the control buttons Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. Press to switch power on. Press more than 3 seconds to switch power off. Access the OSD menu. Confirm the OSD adjustment. Adjust the brightness level. (288E2E) Adjust the audio level. (288E2A/288E2UAE) Warning USB 2.
2. Setting up the monitor Description of the On Screen Display Main menu What is On-Screen Display (OSD)? SmartResponse SmartFrame Off, Fast , Faster, Fastest On, Off Size: 1, 2, 3, 4, 5, 6, 7 Brightness: 0~100 On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification Warning This monitor is designed for optimal performance at its native resolution, 3840 × 2160. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 × 2160 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 2.4 MultiView 100mm What is it? 100mm Multiview enables active variety connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze.
2. Setting up the monitor 1. Toggle to the right to enter OSD Menu Screen. When the sub source is not detected. 2. Toggle to the up or down to select main menu [PIP / PBP], then toggle to the right to confirm. 3. Toggle to the up or down to select [PIP / PBP Mode], then toggle to the right. Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
2. Setting up the monitor • PIP Size: When PIP is activated, there are three sub-window sizes to choose: [Small], [Middle], [Large]. • Off: Stop MultiView function. A (main) B Small A (main) Middle Large • PIP Position: When PIP is activated, there are four sub-window positions to choose. Top-Left B A Top-Right B A (main) (main) Bottom-Left A B • Note When you do the SWAP function, the video and its audio source will swap at the same time.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 1. Toggle to the left to launch the SmartImage on screen display. 2.
3. Image Optimization • Racing: For playing Racing games. Provides fastest response time and high color saturation. 3.2 SmartContrast • RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlighted portion. • Gamer 1: User’s preference settings saved as Gamer 1. • Gamer 2: User’s preference settings saved as Gamer 2.
4. AMD FreeSyncTM • AMD Radeon R7 260X • AMD Radeon R7 260 4. AMD FreeSyncTM ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.
5. Technical Specifications Stand Tilt Height adjustment (288E2E/288E2UAE) -5 / +20 degree 100 mm Power (288E2A) Consumption Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply AC Input Voltage at 100VAC , 60Hz AC Input Voltage at 115VAC , 60Hz AC Input Voltage at 230VAC , 50Hz 37.4 W (typ.) 37.4 W (typ.) 37.5 W (typ.) 0.3 W 0.3 W 0.3 W 0.3 W AC Input Voltage at 100VAC , 60Hz 127.6 BTU/hr (typ.) 0.
5. Technical Specifications Normal Operation Sleep (Standby mode) Off mode Heat Dissipation* Normal Operation Sleep (Standby mode) Off mode Power LED indicator Power Supply 29.5 W (typ.) 29.3 W (typ.) 29.2 W (typ.) 0.5 W 0.5 W 0.5 W 0.3 W AC Input Voltage at 100VAC , 60Hz 100.7 BTU/hr (typ.) 0.3 W AC Input Voltage at 115VAC , 60Hz 100.0 BTU/hr (typ.) 0.3 W AC Input Voltage at 230VAC , 50Hz 99.7 BTU/hr (typ.) 1.71 BTU/hr 1.71 BTU/hr 1.71 BTU/hr 1.02 BTU/hr 1.02 BTU/hr 1.
5. Technical Specifications Environmental and energy RoHS Packaging Specific Substances Cabinet Color Finish Yes 100% recyclable 100% PVC BFR free housing Black Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. SmartUniformity and Delta E information sheets are included in the box.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 3840 x 2160 @ 60 Hz Recommended Resolution 3840 x 2160 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 63.89 1280 x 1024 60.02 55.94 1440 x 900 59.89 65.29 1680 x 1050 59.95 67.50 1920 x 1080 60.00 88.
6. Power Management Note This data is subject to change without notice. 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs • 8. Troubleshooting & FAQs Visible signs of smoke or sparks 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Make sure the signal cable is properly connected to your computer. • Make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.
8. Troubleshooting & FAQs “after-imaging” or “ghost imaging” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 8.2 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 3840 x 2160. Image appears distorted. Text is fuzzy or blurred.
8. Troubleshooting & FAQs Q3: How do I adjust the resolution? Q7: Can I change the color setting of my monitor? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q4: What if I get lost when I am making monitor adjustments via OSD? Ans.
8. Troubleshooting & FAQs Q9: Are Philips LCD monitors Plugand- Play? Q12: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/ lock status as shown below illustrators. Ans.: Y es, the monitors are Plug-andPlay compatible with Windows 10/8.1/8/7, Mac OSX. Q10: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Ans.
2020 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.