DVR_NC_ii_98911_0047.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 2 Safety IMPORTANT SAFEGUARDS 1. Read Instructions: All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions: The safety and operating instructions should be retained for future reference. 3. Heed Warnings: All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions: All operating and use instructions should be followed. 5.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 3 Safety 12. Damage Requiring Service: Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions. If liquid has been spilled, or objects have fallen into the unit. If the unit has been exposed to train or water. If the unit does not operate normally by following the operating instructions.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 4 NetCam DVR Safety SAFETY PRECAUTIONS This label may appear on the bottom of the unit due to space limitations. CAUTION:TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 5 Contents TABLE OF CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVR_NC_ii_98911_0047.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 7 Section 1 1 INTRODUCTION The NetCam DVR is a 4-channel camera style DVR all-in-one system with a Web server, a networking device, a CCD module and a HDD (6GB standard and changeable). The unit only needs a designated power supply and network in order to operate. 1.1 Description DVR with a built-in HDD The NetCam DVR records images onto it’s own HDD at the maximum speed of 10 frames per second.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 8 Section 1 1.2 Unpacking Unpack carefully. This is electronic equipment and should be handled with care to prevent damage to the unit. Check for the following items: ■ ✓ ■ ✓ ■ ✓ ■ ✓ ■ ✓ ■ ✓ ■ ✓ ■ ✓ ■ ✓ NetCam DVR - 4-Channel Camera Style Network DVR AC Adapter & Power cable DC 12V, 1A Lens 8mm, f 1.3, C mount, already assembled 1 m crossover cable (Red) 2 m direct cable (White) Plug & cable clamp for DB-15 Wrench 0.035” [0.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Connection TXD RXD S+ SGND Input 1 + Input 1 Input 2 + Input 2 Output 1 + Output 1 12 V + IRIS GND EM Page 9 Section 1 Function RS-232 transmit. RS-232 receive. NetCam DVR RS-485. (half-duflex). NetCam DVR RS-485. (half-duflex).
DVR_NC_ii_98911_0047.qxd 12/13/00 NetCam DVR Switch OUT/IN 1, 2, 3, 4 Page 10 Section 1 Function Configures NetCam DVR to accept input (IN) or output (OUT) signal to the BNC connector. 75 Ω (ON) or High impedance (OFF) (Loop through).
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR 2 2.1 ■ ■ ■ ■ ■ ■ Page 11 Section 2 INSTALLATION Setup Connect Ethernet and Power to NetCam DVR on local network for configuration. Install the setup program for NetCam DVR. Assign an IP address to NetCam DVR and configure administrator’s condition. Configure user’s condition. Locate NetCam DVR, and re-connect power and Ethernet. Adjust the Focus. 2.1.1 Connecting ■ Connect Ethernet line to the Ethernet port in the rear.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 12 Section 2 2.2 Installing NetCam DVR Setup Program 2.2.1 Installing for the first time Copy the ‘NetCam DVR Viewer’ program files onto your PC. Click ‘setup.exe’ file. Follow the instructions. It is recommended that you reboot your PC after the setup procedure is completed. When prompted for “Locked file” for MSFLXGRD.ocx, MSCOMCT2.ocx and COMCTL32.ocx select “Reboot”. 2.2.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 13 NetCam DVR ■ Section 2 Select the files that you want to modify. However, it is recommended that you click the ‘Next’ button to select all directories. The whole process will then be automatically completed. Repairing Allows you to repair an already installed NetCam DVR Viewer automatically using the setup program. ■ Select the ‘Repair’ mode and the whole process will be completed automatically.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 14 Section 2 2.3 Assigning IP address and Starting Configuration To enable access to the NetCam DVR, first you have to assign an appropriate IP. Terminology ■ IP Address: Acquire IP address from network administrator. ■ MAC Address: The 12digit number on the label at the bottom of NetCam DVR. ■ Direct Cable: A common UTP cable to connect devices such as a PC or NetCam DVR that has an Ethernet port (RJ-45 port).
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 15 Section 2 2.3.2 Starting the setup program of NetCam DVR Ensure that the NetCam DVR Viewer is installed. ■ Click the file ‘CamViewer.exe’. The main frame of NetCam DVR Viewer is displayed ■ Click the ‘setup’ button. You can setup the NetCam DVR only if it is connected on a local network. 2.3.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 16 Section 2 Assigning an IP address ■ Key in a new IP address in the ‘Change IP addr’ box. ■ When you key in a new IP address, the button is activated and you can click the button. Setting system information ■ Click the ‘Start’ button after keying in a password. The ‘Setup’ window in which you can set up the NetCam DVR is displayed. ■ With ‘Initialize FlashInfo’, you can reset all the setting to the default values.
DVR_NC_ii_98911_0047.qxd 12/13/00 NetCam DVR 1:53 PM Page 17 Section 2 Setting IP security mode You can restrict accessibility to the NetCam DVR with user’ IP address registering. Only the users whose PC’s IP address is registered can access the NetCam DVR. You may stop a registered user accessing the NetCam DVR temporary with the menu option on the right side of each IP address. You can change the IP addresses to allow access.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 18 Section 2 HDD Use: Click the ‘HDD Enable’ field to enable the NetCam DVR to record images on it’s HDD. If not enabled, the NetCam DVR will not record nor replay. (Default figure is set to HDD disable. In this case, every button on a main frame that relates to recording and replaying is disabled.) You can format the HDD with the ‘HDD Format’ button. When the HDD is formatted, all recorded images will be deleted.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 19 Section 2 Using ARP in Windows 95 ■ Start a DOS window and type the following commands. arp -s ping ■ Example arp -s 200.243.232.178 00-40-8c-10-00-86 200.243.232.130 ping 200.243.232.
DVR_NC_ii_98911_0047.qxd NetCam DVR ■ 20 12/13/00 1:53 PM Page 20 Section 2 When you stop receiving the reply using the + keys, data loss may be from 0% to 99% statistically, meaning it is normal to get a reply. This is the reply you would get normally. If the statistic shows ‘100% loss’, you should check if the network line and connection status are stable; if the assigned IP address is available, or if a PC (or notebook computer) has the same local network’s IP address as the NetCam DVR.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 21 Section 3 3 Configuring NetCam DVR After assigning an IP address to the NetCam DVR, you can configure the NetCam DVR through the NetCam DVR Viewer. 3.1 ■ Opening the ‘NetCam DVR Viewer’ Click the file ‘CamViewer.exe’, the monitoring screen is displayed. 3.2 Configuring NetCam DVR Connect: ■ To connect the NetCam DVR, highlight the respective name and click the ‘Connect’ button.
DVR_NC_ii_98911_0047.qxd 12/13/00 NetCam DVR 1:53 PM Page 22 Section 3 ADD: You can add a new NetCam DVR. You can also add a backup file as a resource. All the backup files of the NetCam DVR can be only be accessed through NetCam DVR Viewer. ■ Select ‘IP(Remote)’ button to add a new NetCam DVR. Enter the IP address and name. ■ Select‘File(Local)’ button to add a backup file. Enter the file name and path, then the designated name. You can REMOVE & EDIT: remove or edit an existing resource.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 23 Section 3 3.3 Configuring recording and system conditions Update: When connecting the NetCam DVR, you can update the recorded data to monitor by clicking the ‘Update’ button. Update changes from to Option: You can configure the recording options by clicking the ‘Option’ button. Motion Detect Channel: You can select a channel that detects motion.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 24 Section 3 Event Save: You can select the recording levels of frame rate, image resolution and image quality (compressing rate) when events occur. Event: You can configure which channel sends video signals to record on the HDD when events occur.
DVR_NC_ii_98911_0047.qxd 12/13/00 NetCam DVR 1:53 PM Page 25 Section 3 HDD: Configures the self-contained HDD: - HDD Management: This shows the status of the HDD. The left side shows the same results in graphic format. You can format the HDD by clicking the ‘HDD Format’ button, as well as via the setup program. Auto Delete: You can automatically delete the data by 1,000, 2000, or 5000 frames from the first frame when the HDD is full. You can also disable the function.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 26 NetCam DVR - Password: You can change the password. Key in the old password, then the new password twice. It is very hard to repair the password if you do not remember it. The only way to repair, is to initialize with special software developed by Philips. However, this is not provided to end users. - Screen Adj.: You can adjust the screen display for brightness, contrast, hue, saturation, horizontal offset, and vertical offset.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 27 Section 3 If you click the ‘CD (650M)’ option, the NetCam DVR will back-up a file of 650MB. If the selected data size is bigger than 650MB, the NetCam DVR will split the total data into partitions of 650MB. You can replay the data via the NetCam DVR Viewer by defining the data as local source. However, the first file of the split files will have the index data for total backed-up data files.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 28 NetCam DVR Section 3 About: Allows you to view the information about the Viewer such as the current NetCam DVR Viewer version, and contact point of Philips to inquire about information. Exit: Exit from the Viewer. However, you have to disconnect first. 3.4 Real-time image monitoring Channel selection and controlling Channels that are receiving video signals are shown in black, the others in gray.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 29 NetCam DVR ■ ■ ■ Section 3 Click the ‘Enable’ button to focus on an existing defined area. Click the ‘Disable’ to return to full view option. Click the ‘Attenuation’ button to change the unfocused area’s image quality. Controlling pan/tilt/zoom (Only available when the pan/tilt/zoom option is enabled for the NetCam DVR.) ■ ■ ■ ■ Zoom: To zoom in and out. Accel: To set controlling speed of pan/tilt/zoom. Focus: To optimize the image focus.
DVR_NC_ii_98911_0047.qxd NetCam DVR 12/13/00 1:53 PM Page 30 Section 3 Lower 1: Displays the NetCam DVR recording start date/time. Lower 2: Displays the number of image frames recorded. Lower 3: Displays the NetCam DVR recording finish date/time. ■ Click on the forward/backward buttons to extend the replay period forward or backward by 1,000 frames for each click. The frame number panel (Upper 2) also changes by a unit of 1,000 frames.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 31 NetCam DVR Section 3 Quad or full view options: Quad: You can view a quad screen, each screen corresponding to each channel. Full: Yon can view a selected channel full screen by clicking ‘1’, ‘2’, ‘3’, or ‘4’. When you want to see images of 720 by 486 resolution, you double click on the replay screen. Return to normal resolution of 360 by 243 by double clicking on the image again.
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM NetCam DVR Page 32 Section 3 Recorded Image Information Panel: Event indicating: When you replay recorded images with selecting eventdetecting sources (‘MD’, ‘S1’, and ‘S2’), this panel shows the events that occurred in a graphic form. You can search the exact time to search by dragging the scroll bar.
DVR_NC_ii_98911_0047.qxd NetCam DVR 4 12/13/00 1:53 PM Page 33 Section 4 ADJUSTING FOCUS Screws 1 2 3 4 5 First, adjust focus of the NetCam DVR by turning the front focus ring of the lens. If you cannot focus with the lens, loosen the three screws in the rear focus ring. Setting the lens at the middle range, focus by turning the rear focus ring. When you have focused, tighten the three screws. Complete the focus by turning the front focus ring of the lens.
DVR_NC_ii_98911_0047.
DVR_NC_ii_98911_0047.qxd 3922 988 98911 00-47 12/13/00 1:53 PM Page 35 2000 Philips Electronics N.V.